TX2 not booting after successful flashing
Hi I have flashed the TX2 at least 10 times now. I cannot access the TX2 via an HDMI connected monitor - nothing shows up. I cannot ssh to the TX2 although for varying periods after boot it can be pinged. After some time it disappears from ping and cannot be reached. I am afraid there is a problem with the board ? here is the output of the flash [ 27.5811 ] Writing partition mb1 with mb1_prod.bin.encrypt [ 27.5817 ] [................................................] 100% [ 27.5927 ] Writing partition spe-fw with spe_sigheader.bin.encrypt [ 27.6165 ] [................................................] 100% [ 27.6265 ] Writing partition mb2 with nvtboot_sigheader.bin.encrypt [ 27.6527 ] [................................................] 100% [ 27.6626 ] Writing partition mts-preboot with preboot_d15_prod_cr_sigheader.bin.encrypt [ 27.6941 ] [................................................] 100% [ 27.7043 ] Writing partition master_boot_record with mbr_1_3.bin [ 27.7406 ] [................................................] 100% [ 27.7485 ] Writing partition APP with system.img [ 27.7526 ] [................................................] 100% [ 172.5150 ] Writing partition mts-bootpack with mce_mts_d15_prod_cr_sigheader.bin.encrypt [ 172.5280 ] [................................................] 100% [ 172.6069 ] Writing partition cpu-bootloader with cboot_sigheader.bin.encrypt [ 172.6242 ] [................................................] 100% [ 172.6379 ] Writing partition bootloader-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 172.6455 ] [................................................] 100% [ 172.6599 ] Writing partition secure-os with tos_sigheader.img.encrypt [ 172.6681 ] [................................................] 100% [ 172.6779 ] Writing partition eks with eks_sigheader.img.encrypt [ 172.6832 ] [................................................] 100% [ 172.6914 ] Writing partition bpmp-fw with bpmp_sigheader.bin.encrypt [ 172.6962 ] [................................................] 100% [ 172.7188 ] Writing partition bpmp-fw-dtb with tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt [ 172.7313 ] [................................................] 100% [ 172.7486 ] Writing partition sce-fw with camera-rtcpu-sce_sigheader.bin.encrypt [ 172.7593 ] [................................................] 100% [ 172.7690 ] Writing partition sc7 with warmboot_wbheader.bin.encrypt [ 172.7755 ] [................................................] 100% [ 172.7841 ] Writing partition kernel with boot.img [ 172.7892 ] [................................................] 100% [ 173.0846 ] Writing partition kernel-dtb with tegra186-quill-p3310-1000-c03-00-base.dtb [ 173.0947 ] [................................................] 100% [ 173.1198 ] [ 173.1221 ] tegradevflash_v2 --write BCT br_bct_BR.bct [ 173.1240 ] Bootloader version 01.00.0000 [ 173.1263 ] Writing partition BCT with br_bct_BR.bct [ 173.1269 ] [................................................] 100% [ 173.1739 ] [ 173.1806 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 173.1813 ] Bootloader version 01.00.0000 [ 173.1832 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 173.1837 ] [................................................] 100% [ 173.2310 ] [ 173.2311 ] Flashing completed [ 173.2312 ] Coldbooting the device [ 173.2333 ] tegradevflash_v2 --reboot coldboot [ 173.2354 ] Bootloader version 01.00.0000 [ 173.2418 ] *** The target t186ref has been flashed successfully. *** Reset the board to boot from internal eMMC. Please see my other thread https://devtalk.nvidia.com/default/topic/1001583/jetson-tx2/jetson-tx2-not-recognized-installation-inside-docker-error-8-error-return-value-8-command-tegrarcm_v2-chip-0x18-rcm-rcm_list_signed-xml-skipuid-reading-board-information-failed-/ Any other suggestions ? I am stuck and I need the board up and running for a project. Thanks Rupert
Hi

I have flashed the TX2 at least 10 times now. I cannot access the TX2 via an HDMI connected monitor - nothing shows up. I cannot ssh to the TX2 although for varying periods after boot it can be pinged. After some time it disappears from ping and cannot be reached. I am afraid there is a problem with the board ?

here is the output of the flash

[ 27.5811 ] Writing partition mb1 with mb1_prod.bin.encrypt
[ 27.5817 ] [................................................] 100%
[ 27.5927 ] Writing partition spe-fw with spe_sigheader.bin.encrypt
[ 27.6165 ] [................................................] 100%
[ 27.6265 ] Writing partition mb2 with nvtboot_sigheader.bin.encrypt
[ 27.6527 ] [................................................] 100%
[ 27.6626 ] Writing partition mts-preboot with preboot_d15_prod_cr_sigheader.bin.encrypt
[ 27.6941 ] [................................................] 100%
[ 27.7043 ] Writing partition master_boot_record with mbr_1_3.bin
[ 27.7406 ] [................................................] 100%
[ 27.7485 ] Writing partition APP with system.img
[ 27.7526 ] [................................................] 100%
[ 172.5150 ] Writing partition mts-bootpack with mce_mts_d15_prod_cr_sigheader.bin.encrypt
[ 172.5280 ] [................................................] 100%
[ 172.6069 ] Writing partition cpu-bootloader with cboot_sigheader.bin.encrypt
[ 172.6242 ] [................................................] 100%
[ 172.6379 ] Writing partition bootloader-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt
[ 172.6455 ] [................................................] 100%
[ 172.6599 ] Writing partition secure-os with tos_sigheader.img.encrypt
[ 172.6681 ] [................................................] 100%
[ 172.6779 ] Writing partition eks with eks_sigheader.img.encrypt
[ 172.6832 ] [................................................] 100%
[ 172.6914 ] Writing partition bpmp-fw with bpmp_sigheader.bin.encrypt
[ 172.6962 ] [................................................] 100%
[ 172.7188 ] Writing partition bpmp-fw-dtb with tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt
[ 172.7313 ] [................................................] 100%
[ 172.7486 ] Writing partition sce-fw with camera-rtcpu-sce_sigheader.bin.encrypt
[ 172.7593 ] [................................................] 100%
[ 172.7690 ] Writing partition sc7 with warmboot_wbheader.bin.encrypt
[ 172.7755 ] [................................................] 100%
[ 172.7841 ] Writing partition kernel with boot.img
[ 172.7892 ] [................................................] 100%
[ 173.0846 ] Writing partition kernel-dtb with tegra186-quill-p3310-1000-c03-00-base.dtb
[ 173.0947 ] [................................................] 100%
[ 173.1198 ]
[ 173.1221 ] tegradevflash_v2 --write BCT br_bct_BR.bct
[ 173.1240 ] Bootloader version 01.00.0000
[ 173.1263 ] Writing partition BCT with br_bct_BR.bct
[ 173.1269 ] [................................................] 100%
[ 173.1739 ]
[ 173.1806 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 173.1813 ] Bootloader version 01.00.0000
[ 173.1832 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 173.1837 ] [................................................] 100%
[ 173.2310 ]
[ 173.2311 ] Flashing completed

[ 173.2312 ] Coldbooting the device
[ 173.2333 ] tegradevflash_v2 --reboot coldboot
[ 173.2354 ] Bootloader version 01.00.0000
[ 173.2418 ]
*** The target t186ref has been flashed successfully. ***
Reset the board to boot from internal eMMC.

Please see my other thread https://devtalk.nvidia.com/default/topic/1001583/jetson-tx2/jetson-tx2-not-recognized-installation-inside-docker-error-8-error-return-value-8-command-tegrarcm_v2-chip-0x18-rcm-rcm_list_signed-xml-skipuid-reading-board-information-failed-/



Any other suggestions ? I am stuck and I need the board up and running for a project.

Thanks Rupert

#1
Posted 03/31/2017 07:54 AM   
Hi rfsch, Does the issue happen after following the installation steps in [url]https://devtalk.nvidia.com/default/topic/1001583/jetson-tx2/jetson-tx2-not-recognized-installation-inside-docker-error-8-error-return-value-8-command-tegrarcm_v2-chip-0x18-rcm-rcm_list_signed-xml-skipuid-reading-board-information-failed-/post/5116716/#5116716[/url]? Within docker?
Hi it happens after following the steps in above thread. It is not from within docker. Thanks Rupert.
Hi

it happens after following the steps in above thread. It is not from within docker.

Thanks

Rupert.

#3
Posted 03/31/2017 08:48 AM   
hello I just received my TX2 jetson card with JetPack 3.0 - L4T R27.1 released for Jetson TX2 But I have a problem for flash bootloader , I tried with several ubuntu 14 [ 6.0490 ] Sending bootloader and pre-requisite binaries [ 6.0498 ] tegrarcm_v2 --download blob blob.bin [ 6.0505 ] Applet version 01.00.0000 [ 6.0637 ] Sending blob [ 6.1889 ] Error: Return value 1 Command tegrarcm_v2 --download blob blob.bin Failed flashing t186ref. why ? Thanks for yours help
hello

I just received my TX2 jetson card with JetPack 3.0 - L4T R27.1 released for Jetson TX2

But I have a problem for flash bootloader , I tried with several ubuntu 14

[ 6.0490 ] Sending bootloader and pre-requisite binaries
[ 6.0498 ] tegrarcm_v2 --download blob blob.bin
[ 6.0505 ] Applet version 01.00.0000
[ 6.0637 ] Sending blob
[ 6.1889 ]
Error: Return value 1
Command tegrarcm_v2 --download blob blob.bin
Failed flashing t186ref.


why ?
Thanks for yours help

#4
Posted 03/31/2017 02:08 PM   
The relevant communications would be over the micro-B USB cable. I doubt flash would have started without this connected and the Jetson in recovery mode, but there have been cases of USB issues after starting when the host is on a VM. Is there anything unusual about your host, e.g., is it a VM?
The relevant communications would be over the micro-B USB cable. I doubt flash would have started without this connected and the Jetson in recovery mode, but there have been cases of USB issues after starting when the host is on a VM. Is there anything unusual about your host, e.g., is it a VM?

#5
Posted 03/31/2017 10:23 PM   
hello my host is native ubuntu 14.04 lsusb : Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 004: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 003: ID 0c45:64d0 Microdia [color="green"]Bus 001 Device 021: ID 0955:7c18 NVidia Corp.[/color] Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub the log filesystem.log : Adding symlink /home/mo/Documents/nvidia/64_TX2/Linux_for_Tegra_tx2/rootfs/lib/modules/4.4.15-tegra/build --> /usr/src/linux-headers-4.4.15-tegra Installing Image into /boot in target rootfs Installing the board *.dtb files into /boot in target rootfs Success! and flash_os_tx.log 6.7313 ] tegrahost_v2 --generateblob blob.xml blob.bin [ 6.7321 ] number of images in blob are 9 [ 6.7323 ] blobsize is 3497944 [ 6.7325 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 144272 [ 6.7345 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 60096 [ 6.7350 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 59824 [ 6.7354 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2077344 [ 6.7399 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 524880 [ 6.7424 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt of size 327072 [ 6.7439 ] Added binary blob_tos_sigheader.img.encrypt of size 54784 [ 6.7439 ] Added binary blob_eks_sigheader.img.encrypt of size 1488 [ 6.7439 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base.dtb of size 248032 [ 6.7439 ] [ 6.7440 ] Sending bootloader and pre-requisite binaries [ 6.7453 ] tegrarcm_v2 --download blob blob.bin [ 6.7462 ] Applet version 01.00.0000 [ 6.7622 ] Sending blob [ 6.9034 ] Error: Return value 1 Command tegrarcm_v2 --download blob blob.bin Failed flashing t186ref. I installed my ubuntu system but I have the same problem :(
hello
my host is native ubuntu 14.04

lsusb :

Bus 001 Device 005: ID 8087:07dc Intel Corp.
Bus 001 Device 004: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 003: ID 0c45:64d0 Microdia
Bus 001 Device 021: ID 0955:7c18 NVidia Corp.

Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

the log filesystem.log :

Adding symlink /home/mo/Documents/nvidia/64_TX2/Linux_for_Tegra_tx2/rootfs/lib/modules/4.4.15-tegra/build --> /usr/src/linux-headers-4.4.15-tegra
Installing Image into /boot in target rootfs
Installing the board *.dtb files into /boot in target rootfs
Success!

and flash_os_tx.log

6.7313 ] tegrahost_v2 --generateblob blob.xml blob.bin
[ 6.7321 ] number of images in blob are 9
[ 6.7323 ] blobsize is 3497944
[ 6.7325 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 144272
[ 6.7345 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 60096
[ 6.7350 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 59824
[ 6.7354 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2077344
[ 6.7399 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 524880
[ 6.7424 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt of size 327072
[ 6.7439 ] Added binary blob_tos_sigheader.img.encrypt of size 54784
[ 6.7439 ] Added binary blob_eks_sigheader.img.encrypt of size 1488
[ 6.7439 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base.dtb of size 248032
[ 6.7439 ]
[ 6.7440 ] Sending bootloader and pre-requisite binaries
[ 6.7453 ] tegrarcm_v2 --download blob blob.bin
[ 6.7462 ] Applet version 01.00.0000
[ 6.7622 ] Sending blob
[ 6.9034 ]
Error: Return value 1
Command tegrarcm_v2 --download blob blob.bin
Failed flashing t186ref.

I installed my ubuntu system but I have the same problem :(

#6
Posted 04/01/2017 02:04 PM   
It sounds like this should work, but USB is failing (it seems like USB is partially working but struggling with low signal quality dropping things after partially working). Are you going through a USB HUB? I'm wondering if a different HUB or going directly to the host without a HUB might help. Is the cable the one supplied with the Jetson?
It sounds like this should work, but USB is failing (it seems like USB is partially working but struggling with low signal quality dropping things after partially working). Are you going through a USB HUB? I'm wondering if a different HUB or going directly to the host without a HUB might help. Is the cable the one supplied with the Jetson?

#7
Posted 04/01/2017 03:25 PM   
I am directly connected to USB HOST and i changed two time the USB cable. The internal 30 GB partition of the card mount well. maybe she is DOA ?
I am directly connected to USB HOST and i changed two time the USB cable.
The internal 30 GB partition of the card mount well.
maybe she is DOA ?

#8
Posted 04/01/2017 04:01 PM   
Although it could be a hardware failure we know that part of the download succeeded...if this is a case of hardware failure then it would be more typical for no USB communications to work at all, yet some of the process worked. You could test hardware by doing the reverse of a flash, and cloning a partition. If a clone works, then you know the system is able to read eMMC (this is the "APP" partition). A clone takes quite some time and produces a very large file, so beware of this before starting. To clone you'll use the commands listed here: [url]https://devtalk.nvidia.com/default/topic/1000105/jetson-tx2/tx2-cloning/post/5110183/#5110183[/url] ...you'll have to substitute this script for flash.sh: [url]https://devtalk.nvidia.com/default/topic/1000105/jetson-tx2/tx2-cloning/post/5111893/#5111893[/url] Overall a 28 GB clone will require about 35GB of space on the host. The process is very similar to flashing, but instead of writing the partition it reads the partition. Be sure to use sudo where mentioned.
Although it could be a hardware failure we know that part of the download succeeded...if this is a case of hardware failure then it would be more typical for no USB communications to work at all, yet some of the process worked.

You could test hardware by doing the reverse of a flash, and cloning a partition. If a clone works, then you know the system is able to read eMMC (this is the "APP" partition). A clone takes quite some time and produces a very large file, so beware of this before starting.

To clone you'll use the commands listed here:
https://devtalk.nvidia.com/default/topic/1000105/jetson-tx2/tx2-cloning/post/5110183/#5110183
...you'll have to substitute this script for flash.sh:
https://devtalk.nvidia.com/default/topic/1000105/jetson-tx2/tx2-cloning/post/5111893/#5111893

Overall a 28 GB clone will require about 35GB of space on the host. The process is very similar to flashing, but instead of writing the partition it reads the partition. Be sure to use sudo where mentioned.

#9
Posted 04/01/2017 04:53 PM   
so using a serial console some output when i issue reset after successfuly flashing. It seems that the serverip is not set ? Its trying to access the router. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-tegra186 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set Config file not found starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 DHCP client bound to address 192.168.1.208 (347 ms) Using ethernet@2490000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.208 Filename 'boot.scr.uimg'. Load address: 0x90000000
so using a serial console

some output when i issue reset after successfuly flashing. It seems that the serverip is not set ? Its trying to access the router.

*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-tegra186
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
Config file not found
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.208 (347 ms)
Using ethernet@2490000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.208
Filename 'boot.scr.uimg'.
Load address: 0x90000000

#10
Posted 04/02/2017 11:33 AM   
when flashing I notice this error NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [
when flashing I notice this error

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[

#11
Posted 04/02/2017 11:45 AM   
Here is the log output during flash and then restart. [0265.489] I> allocated(CO:15) base:0x30049000 size:0x1000 align: 0x0 [0265.495] I> allocated(CO:16) base:0x3004a000 size:0x1000 align: 0x0 [0265.501] I> allocated(CO:17) base:0x3004b000 size:0x1000 align: 0x0 [0265.507] I> allocated(CO:19) base:0x3004d000 size:0x1000 align: 0x0 [0265.514] I> allocated(CO:18) base:0x3004c000 size:0x1000 align: 0x0 [0265.520] I> allocated(CO:20) base:0x3004e000 size:0x1000 align: 0x0 [0265.526] I> allocated(CO:21) base:0x3004f000 size:0x1000 align: 0x0 [0265.532] I> allocated(CO:22) base:0x0 size:0x0 align: 0x0 [0265.538] I> allocated(CO:32) base:0xf6000000 size:0x600000 align: 0x400000 [0265.545] I> allocated(CO:24) base:0x0 size:0x0 align: 0x0 [0265.550] I> allocated(CO:25) base:0x0 size:0x0 align: 0x0 [0265.555] I> allocated(CO:26) base:0x0 size:0x0 align: 0x0 [0265.561] I> allocated(CO:39) base:0x96000000 size:0x2000000 align: 0x2000000 [0265.568] I> allocated(CO:38) base:0x84000000 size:0x400000 align: 0x400000 [0265.575] I> allocated(CO:37) base:0xf7fc0000 size:0x20000 align: 0x20000 [0265.581] I> allocated(CO:40) base:0x84800000 size:0xb00000 align: 0x800000 [0265.588] I> allocated(CO:41) base:0xf7f00000 size:0x80000 align: 0x80000 [0265.595] I> allocated(CO:28) base:0x84400000 size:0x400000 align: 0x400000 [0265.603] I> Boot-device: eMMC [0265.606] I> sdmmc bdev is already initialized [0265.610] W> MB1 PMIC CFG is version 1.2 [0265.614] W> Rail ID 7 is not found on MB1 BCT [0265.618] W> MB1 PMIC CFG is version 1.2 [0265.624] W> MB1 PMIC CFG is version 1.2 [0265.632] W> MB1 PMIC CFG is version 1.2 [0265.636] I> sdram slot : 1 [0265.638] I> Initializing SDRAM [0265.645] I> mss encrypt status check successful [0265.649] I> downloaded image bct_mb1 successfully [0266.040] I> Downloading blob at 0x0000000085300000 [0266.423] I> downloaded image blob successfully [0266.453] I> exiting nv3p server [0266.456] I> disabled_core_mask: 0xffffff0c [0266.460] I> Enabled Cores: 0xf3 [0266.463] I> TPC disable fuse status: 0 [0266.467] I> Booting Parker Sku [0266.470] I> Setup temp. GSC#29 (base:0x30000000, size:0x00010000) [0266.476] I> Loading preboot [0266.481] I> Binary(1) of size 59024 is loaded @ 0x40000000 [0266.486] I> Restrict GSC#29 access to DPMU only [0266.491] I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c [0266.495] I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c [0266.500] I> WP0 triggered [0266.503] I> Waypoint-0 ACK received :) [0266.507] I> WP0.5 triggered [0266.510] I> Initialized SCRs [0266.513] W> MB1 PMIC CFG is version 1.2 [0266.521] W> MB1 PMIC CFG is version 1.2 [0266.571] I> Waypoint-0.5 ACK received :) [0266.575] I> Setup temp. GSC#28 (base:0x84400000, size:0x00400000) [0266.581] I> Loading MTS-DMCE [0266.595] I> Binary(2) of size 266624 is loaded @ 0x84400000 [0266.601] I> disabled_core_mask: 0xffffff0c [0266.605] I> Loading MTS-PROPER [0266.608] I> Binary(3) of size 1809872 is loaded @ 0x0 [0266.613] I> Restrict GSC#28 access to DPMU only [0266.617] I> disabled_core_mask: 0xffffff0c [0266.621] I> WP1 triggered [0266.624] I> Loading MB2 [0266.627] I> Binary(8) of size 59696 is loaded @ 0x84000000 [0266.632] W> MB1 PMIC CFG is version 1.2 [0266.637] I> Configure DMCE carveout GSC#13 [0266.641] I> CPU reset vector: 0x96000000 [0266.645] I> MB2-params @ 0xf7f00000 [0266.649] I> Waypoint-1 ACK received :) [0266.653] I> Configure SC7 carveout GSC#23 [0266.657] I> MB1 recovery done [0266.663] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-597f2c10) [0266.672] I> Default Heap @ [0xd486400 - 0xd488400] [0266.677] I> DMA Heap @ [0x84900000 - 0x85300000] [0266.682] I> bit @ 0xd480000 [0266.684] I> BR-BCT relocated to 0xf7f20000 [0266.689] I> Boot-device: eMMC [0266.693] I> pmic: reset reason (nverc) : 0x80 [0266.697] I> Reading GPT from 512 for device 00000003 [0266.703] I> Reading GPT from 8388096 for device 00000003 [0266.710] I> Found 6 partitions in 00000003 device [0266.715] I> Reading GPT from 512 for device 00010003 [0266.721] I> Found 17 partitions in 00010003 device [0266.729] I> Binary(16) of size 524480 is loaded @ 0xf7600000 [0266.737] I> Binary(17) of size 326672 is loaded @ 0xf77b03e0 [0266.863] I> BPMP-FW load address = 0xf7600000 [0266.868] I> BPMP-FW DTB load address = 0x501b03e0 [0266.872] I> Copy BTCM section [0266.876] I> Binary(13) of size 143872 is loaded @ 0x96000000 [0266.882] I> MB2-params @ 0xf7f00000 [0266.885] I> CPUBL-params @ 0xf7f00000 [0266.889] I> CPU-BL loaded at : 0x96000000 [0266.893] I> Loading TOS ... [0266.896] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0266.902] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0266.909] I> Erasing Monitor @ 0x8490f600 [0266.914] I> Unhalting SCE [0266.917] I> Waypoint2-ACK: 0x5200b694 [0266.921] I> MB2(TBoot-BPMP) Recovery done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0267.283] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-e9641362) [0267.292] I> gpio framework initialized [0267.296] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0267.303] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0267.310] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0267.319] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0267.326] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0267.334] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0267.342] I> CPU: ARM Cortex A57 [0267.345] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100 [0267.349] I> L2 ECC enabled : yes [0267.353] I> CPU-BL Params @ 0xf7f00000 [0267.356] I> 0) Base:0x00000000 Size:0x00000000 [0267.361] I> 1) Base:0xf7e00000 Size:0x00100000 [0267.365] I> 2) Base:0xf7d00000 Size:0x00100000 [0267.370] I> 3) Base:0xf7c00000 Size:0x00100000 [0267.374] I> 4) Base:0xf7b00000 Size:0x00100000 [0267.378] I> 5) Base:0xf7a00000 Size:0x00100000 [0267.383] I> 6) Base:0xf7600000 Size:0x00200000 [0267.387] I> 7) Base:0xf7000000 Size:0x00400000 [0267.392] I> 8) Base:0xf7900000 Size:0x00100000 [0267.396] I> 9) Base:0xf7800000 Size:0x00100000 [0267.401] I> 10) Base:0xf6800000 Size:0x00800000 [0267.405] I> 11) Base:0x30000000 Size:0x00040000 [0267.409] I> 12) Base:0xf7500000 Size:0x00100000 [0267.414] I> 13) Base:0x30040000 Size:0x00001000 [0267.418] I> 14) Base:0x30048000 Size:0x00001000 [0267.423] I> 15) Base:0x30049000 Size:0x00001000 [0267.427] I> 16) Base:0x3004a000 Size:0x00001000 [0267.432] I> 17) Base:0x3004b000 Size:0x00001000 [0267.436] I> 18) Base:0x3004c000 Size:0x00001000 [0267.440] I> 19) Base:0x3004d000 Size:0x00001000 [0267.445] I> 20) Base:0x3004e000 Size:0x00001000 [0267.449] I> 21) Base:0x3004f000 Size:0x00001000 [0267.454] I> 22) Base:0x00000000 Size:0x00000000 [0267.458] I> 23) Base:0xf7ff0000 Size:0x00010000 [0267.463] I> 24) Base:0x00000000 Size:0x00000000 [0267.467] I> 25) Base:0x00000000 Size:0x00000000 [0267.471] I> 26) Base:0x00000000 Size:0x00000000 [0267.476] I> 27) Base:0x00000000 Size:0x00000000 [0267.480] I> 28) Base:0x84400000 Size:0x00400000 [0267.485] I> 29) Base:0x30000000 Size:0x00010000 [0267.489] I> 30) Base:0xf8000000 Size:0x08000000 [0267.494] I> 31) Base:0x00000000 Size:0x00000000 [0267.498] I> 32) Base:0xf6000000 Size:0x00600000 [0267.502] I> 33) Base:0x80000000 Size:0x76000000 [0267.507] I> 34) Base:0x100000000 Size:0x180000000 [0267.512] I> 35) Base:0x00000000 Size:0x00000000 [0267.516] I> 36) Base:0x00000000 Size:0x00000000 [0267.520] I> 37) Base:0xf7fc0000 Size:0x00020000 [0267.525] I> 38) Base:0x84000000 Size:0x00400000 [0267.529] I> 39) Base:0x96000000 Size:0x02000000 [0267.534] I> 40) Base:0x84800000 Size:0x00b00000 [0267.538] I> 41) Base:0xf7f00000 Size:0x00080000 [0267.543] I> 42) Base:0x00000000 Size:0x00000000 [0267.547] I> 43) Base:0x00000000 Size:0x00000000 [0267.551] I> Boot-device: eMMC [0267.576] I> sdmmc ddr50 mode [0267.579] I> sdmmc bdev is already initialized [0267.584] I> Reading GPT from 512 for device 00000003 [0267.589] I> Reading GPT from 8388096 for device 00000003 [0267.596] I> Found 6 partitions in 00000003 device [0267.600] I> Reading GPT from 512 for device 00010003 [0267.606] I> Found 17 partitions in 00010003 device [0267.611] I> Recovery boot_type: 0 [0267.614] I> Entering 3p server [0267.617] I> Entering into 3p server.. [0267.621] I> Transport interface is USB [0268.066] I> transport_usbf_priv_open USB configuration success [0271.504] I> Populate storage info [0271.519] I> Erasing device 0: 3 [0271.522] I> Erasing device 16384 blocks from block 0 [0271.543] I> Erase successful. [0271.547] I> Writing device 0: 3 [0271.551] I> Total write size is 16896 bytes [0271.594] I> Reading GPT from 512 for device 00000003 [0271.600] I> Reading GPT from 8388096 for device 00000003 [0271.606] I> Found 6 partitions in 00000003 device [0271.611] I> Write successful. [0271.615] I> Erasing device 1: 3 [0271.618] I> Erasing device 61071360 blocks from block 0 [0272.753] I> Erase successful. [0272.757] I> Writing device 1: 3 [0272.760] I> Total write size is 512 bytes [0272.766] I> Write successful. [0272.770] I> Writing device 1: 3 [0272.773] I> Total write size is 2688 bytes [0272.779] I> Reading GPT from 512 for device 00010003 [0272.785] I> Found 17 partitions in 00010003 device [0272.789] I> Write successful. [0272.793] I> Writing device 1: 3 [0272.796] I> Total write size is 16896 bytes [0272.802] I> Reading GPT from 512 for device 00010003 [0272.808] I> Found 17 partitions in 00010003 device [0272.813] I> Write successful. [0272.817] I> Writing mb1 partition [0272.820] I> Total write size is 88368 bytes [0272.847] I> Write successful. [0272.851] I> Writing spe-fw partition [0272.855] I> Total write size is 57184 bytes [0272.883] I> Write successful. [0272.887] I> Writing mb2 partition [0272.890] I> Total write size is 60720 bytes [0272.924] I> Write successful. [0272.928] I> Writing mts-preboot partition [0272.932] I> Total write size is 59824 bytes [0272.971] I> Write successful. [0272.975] I> Writing device 1: 3 [0272.978] I> Total write size is 512 bytes [0272.983] I> Write successful. [0272.987] I> Writing APP partition [0272.990] I> Total write size is 3359367596 bytes [0412.121] I> Write successful. [0412.125] I> Writing mts-bootpack partition [0412.129] I> Total write size is 2077344 bytes [0412.217] I> Write successful. [0412.221] I> Writing cpu-bootloader partition [0412.225] I> Total write size is 196176 bytes [0412.245] I> Write successful. [0412.249] I> Writing bootloader-dtb partition [0412.254] I> Total write size is 248432 bytes [0412.272] I> Write successful. [0412.276] I> Writing secure-os partition [0412.279] I> Total write size is 54784 bytes [0412.287] I> Write successful. [0412.291] I> Writing eks partition [0412.294] I> Total write size is 1488 bytes [0412.300] I> Write successful. [0412.304] I> Writing bpmp-fw partition [0412.308] I> Total write size is 524880 bytes [0412.334] I> Write successful. [0412.338] I> Writing bpmp-fw-dtb partition [0412.342] I> Total write size is 327072 bytes [0412.361] I> Write successful. [0412.364] I> Writing sce-fw partition [0412.368] I> Total write size is 65488 bytes [0412.377] I> Write successful. [0412.380] I> Writing sc7 partition [0412.384] I> Total write size is 20848 bytes [0412.390] I> Write successful. [0412.394] I> Writing kernel partition [0412.398] I> Total write size is 6717440 bytes [0412.682] I> Write successful. [0412.686] I> Writing kernel-dtb partition [0412.690] I> Total write size is 248032 bytes [0412.706] I> Write successful. [0412.716] I> Writing BCT partition [0412.719] I> Total write size is 3584 bytes [0412.763] I> Write successful. [0412.780] I> Writing MB1_BCT partition [0412.784] I> Total write size is 49968 bytes [0412.824] I> Write successful. [0412.835] I> Rebooting : reset-coldboot [0000.191] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291) [0000.199] I> Default Heap @ [0xd486400 - 0xd488400] [0000.204] I> DMA Heap @ [0x84900000 - 0x85300000] [0000.209] I> bit @ 0xd480000 [0000.211] I> BR-BCT relocated to 0xf7f20000 [0000.216] I> Boot-device: eMMC [0000.220] I> pmic: reset reason (nverc) : 0x0 [0000.224] I> Reading GPT from 512 for device 00000003 [0000.230] I> Reading GPT from 8388096 for device 00000003 [0000.237] I> Found 6 partitions in 00000003 device [0000.241] I> Reading GPT from 512 for device 00010003 [0000.248] I> Found 17 partitions in 00010003 device [0000.253] W> No valid slot number is found in scratch register [0000.259] W> Return default slot: _a [0000.262] I> A/B: bin_type (16) slot 0 [0000.266] I> Select partition: bpmp-fw [0000.269] I> Loading partition bpmp-fw at 0xf7600000 [0000.274] I> Reading two headers - addr:0xf7600000 blocks:1 [0000.280] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1 [0000.295] I> Binary(16) of size 524480 is loaded @ 0xf7600000 [0000.300] W> No valid slot number is found in scratch register [0000.306] W> Return default slot: _a [0000.309] I> A/B: bin_type (17) slot 0 [0000.313] I> Select partition: bpmp-fw-dtb [0000.317] I> Loading partition bpmp-fw-dtb at 0xf77f0000 [0000.322] I> Reading two headers - addr:0xf77f0000 blocks:1 [0000.328] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1 [0000.339] I> Binary(17) of size 326672 is loaded @ 0xf77b0200 [0000.467] I> BPMP-FW load address = 0xf7600000 [0000.471] I> BPMP-FW DTB load address = 0x501b0200 [0000.476] I> Loading SCE-FW ... [0000.479] W> No valid slot number is found in scratch register [0000.485] W> Return default slot: _a [0000.488] I> A/B: bin_type (12) slot 0 [0000.492] I> Select partition: sce-fw [0000.495] I> Loading partition sce-fw at 0xf7800000 [0000.500] I> Reading two headers - addr:0xf7800000 blocks:1 [0000.506] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1 [0000.514] I> Binary(12) of size 65088 is loaded @ 0xf7800000 [0000.520] I> Init SCE [0000.522] I> Copy BTCM section [0000.525] W> No valid slot number is found in scratch register [0000.530] W> Return default slot: _a [0000.534] I> A/B: bin_type (13) slot 0 [0000.537] I> Select partition: cpu-bootloader [0000.542] I> Loading partition cpu-bootloader at 0x96000000 [0000.547] I> Reading two headers - addr:0x96000000 blocks:1 [0000.553] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1 [0000.563] I> Binary(13) of size 195776 is loaded @ 0x96000000 [0000.568] W> No valid slot number is found in scratch register [0000.574] W> Return default slot: _a [0000.578] I> A/B: bin_type (20) slot 0 [0000.581] I> Select partition: bootloader-dtb [0000.585] I> Loading partition bootloader-dtb at 0x85300000 [0000.591] I> Reading two headers - addr:0x85300000 blocks:1 [0000.596] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1 [0000.607] I> Binary(20) of size 248032 is loaded @ 0x85300000 [0000.613] I> MB2-params @ 0xf7f00000 [0000.616] I> CPUBL-params @ 0xf7f00000 [0000.620] I> CPU-BL loaded at : 0x96000000 [0000.624] I> Loading TOS ... [0000.627] W> No valid slot number is found in scratch register [0000.632] W> Return default slot: _a [0000.636] I> A/B: bin_type (14) slot 0 [0000.639] I> Select partition: secure-os [0000.643] I> Loading partition secure-os at 0x8490f400 [0000.648] I> Reading two headers - addr:0x8490f400 blocks:1 [0000.654] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1 [0000.662] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0000.668] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0000.675] I> Erasing Monitor @ 0x8490f600 [0000.679] I> Unhalting SCE [0000.683] I> Waypoint2-ACK: 0x5200b8d0 [0000.687] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.049] I> Welcome to Cboot [0001.052] I> Cboot Version: 00.00.2014.50-t186-fabbc56c [0001.057] I> CPU-BL Params @ 0xf7f00000 [0001.060] I> 0) Base:0x00000000 Size:0x00000000 [0001.065] I> 1) Base:0xf7e00000 Size:0x00100000 [0001.069] I> 2) Base:0xf7d00000 Size:0x00100000 [0001.074] I> 3) Base:0xf7c00000 Size:0x00100000 [0001.078] I> 4) Base:0xf7b00000 Size:0x00100000 [0001.082] I> 5) Base:0xf7a00000 Size:0x00100000 [0001.087] I> 6) Base:0xf7600000 Size:0x00200000 [0001.091] I> 7) Base:0xf7000000 Size:0x00400000 [0001.096] I> 8) Base:0xf7900000 Size:0x00100000 [0001.100] I> 9) Base:0xf7800000 Size:0x00100000 [0001.105] I> 10) Base:0xf6800000 Size:0x00800000 [0001.109] I> 11) Base:0x30000000 Size:0x00040000 [0001.113] I> 12) Base:0xf7500000 Size:0x00100000 [0001.118] I> 13) Base:0x30040000 Size:0x00001000 [0001.122] I> 14) Base:0x30048000 Size:0x00001000 [0001.127] I> 15) Base:0x30049000 Size:0x00001000 [0001.131] I> 16) Base:0x3004a000 Size:0x00001000 [0001.136] I> 17) Base:0x3004b000 Size:0x00001000 [0001.140] I> 18) Base:0x3004c000 Size:0x00001000 [0001.144] I> 19) Base:0x3004d000 Size:0x00001000 [0001.149] I> 20) Base:0x3004e000 Size:0x00001000 [0001.153] I> 21) Base:0x3004f000 Size:0x00001000 [0001.158] I> 22) Base:0x00000000 Size:0x00000000 [0001.162] I> 23) Base:0xf7ff0000 Size:0x00010000 [0001.167] I> 24) Base:0x00000000 Size:0x00000000 [0001.171] I> 25) Base:0x00000000 Size:0x00000000 [0001.175] I> 26) Base:0x00000000 Size:0x00000000 [0001.180] I> 27) Base:0x00000000 Size:0x00000000 [0001.184] I> 28) Base:0x84400000 Size:0x00400000 [0001.189] I> 29) Base:0x30000000 Size:0x00010000 [0001.193] I> 30) Base:0xf8000000 Size:0x08000000 [0001.198] I> 31) Base:0x00000000 Size:0x00000000 [0001.202] I> 32) Base:0xf6000000 Size:0x00600000 [0001.206] I> 33) Base:0x80000000 Size:0x76000000 [0001.211] I> 34) Base:0x100000000 Size:0x180000000 [0001.215] I> 35) Base:0x00000000 Size:0x00000000 [0001.220] I> 36) Base:0x00000000 Size:0x00000000 [0001.224] I> 37) Base:0xf7fc0000 Size:0x00020000 [0001.229] I> 38) Base:0x84000000 Size:0x00400000 [0001.233] I> 39) Base:0x96000000 Size:0x02000000 [0001.238] I> 40) Base:0x84800000 Size:0x00b00000 [0001.242] I> 41) Base:0xf7f00000 Size:0x00080000 [0001.246] I> 42) Base:0x00000000 Size:0x00000000 [0001.251] I> 43) Base:0x00000000 Size:0x00000000 [0001.255] platform_init_interrupts-121, 1* [0001.260] Interrupts Init done [0001.263] calling constructors [0001.266] initializing heap [0001.268] initializing threads [0001.272] initializing timers [0001.275] creating bootstrap completion thread [0001.279] top of bootstrap2() [0001.282] CPU: ARM Cortex A57 [0001.285] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.290] initializing platform [0001.294] I> Boot-device: eMMC [0001.297] I> odm data is 1090000 [0001.300] I> Reading GPT from 512 for device 00000003 [0001.306] I> Reading GPT from 8388096 for device 00000003 [0001.313] I> Found 6 partitions in 00000003 device [0001.317] I> Reading GPT from 512 for device 00010003 [0001.323] I> Found 17 partitions in 00010003 device [0001.328] W> No valid slot number is found in scratch register [0001.333] W> Return default slot: _a [0001.337] I> A/B: bin_type (1) slot 0 [0001.340] I> Select partition: kernel-dtb [0001.344] I> Loading partition kernel-dtb at 0x92000000 [0001.353] I> Kernel_dtb @0x92000000 [0001.356] I> Bl_dtb @0x85300000 [0001.359] I> gpio framework initialized [0001.363] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.370] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.378] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.386] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.393] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.402] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.409] E> tegrabl_blob_init: BMP partition does not have valid Blob [0001.416] E> tegrabl_load_bmp_blob: BMP blob initialization failed [0001.422] W> Loading bmp blob to memory failed [0001.430] I> Find /i2c@c250000's alias i2c7 [0001.434] I> Reading eeprom i2c=7 address=0x50 [0001.463] I> Device at /i2c@c250000:0x50 [0001.467] I> Reading eeprom i2c=7 address=0x57 [0001.496] I> Device at /i2c@c250000:0x57 [0001.501] I> Find /i2c@c240000's alias i2c1 [0001.505] I> Reading eeprom i2c=1 address=0x51 [0001.511] I> Eeprom read failed 0x1a800027 [0001.515] I> Find /i2c@3160000's alias i2c0 [0001.519] I> Reading eeprom i2c=0 address=0x50 [0001.524] I> Eeprom read failed 0x1a800027 [0001.529] I> Find /i2c@3180000's alias i2c2 [0001.533] I> Reading eeprom i2c=2 address=0x54 [0001.538] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.568] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.573] I> Device at /i2c@3180000:0x54 [0001.577] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.582] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.593] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.598] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.609] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.614] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.625] initializing target [0001.628] calling apps_init() [0001.631] starting app android_boot_app [0001.635] I> Gpio keyboard init success [0001.639] I> Kernel type = Normal [0001.642] I> Loading kernel/boot.img ... [0001.646] W> No valid slot number is found in scratch register [0001.652] W> Return default slot: _a [0001.655] I> A/B: bin_type (0) slot 0 [0001.658] I> Select partition: kernel [0001.662] I> Loading partition kernel at 0xa8000000 [0001.743] W> No valid slot number is found in scratch register [0001.749] W> Return default slot: _a [0001.752] I> A/B: bin_type (1) slot 0 [0001.756] I> Select partition: kernel-dtb [0001.759] I> Loading partition kernel-dtb at 0x92000000 [0001.768] I> Kernel DTB @ 0x92000000 [0001.772] I> Verified boot state = Orange [0001.775] E> tegrabl_display_clear: display is not initialized [0001.781] I> Checking boot.img header magic ... [0001.785] I> [OK] [0001.787] I> Valid boot.img @ 0xa8000000 [0001.791] I> decompressor handler not found [0001.795] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.802] I> Done [0001.804] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000 [0001.813] I> Updated bpmp info to DTB [0001.819] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb [0001.824] I> Updated initrd info to DTB [0001.828] I> disabled_core_mask: 0xffffff0c [0001.832] I> Kernel type = Normal [0001.835] I> add_serialno: Serial Num = 0320817136116 [0001.840] W> No valid slot number is found in scratch register [0001.845] W> Return default slot: _a [0001.849] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0 [0001.888] I> Updated bootarg info to DTB [0001.893] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0 [0001.899] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1 [0001.905] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2 [0001.911] E> "ids" doesn't exist, creating [0001.915] E> "connection" doesn't exist, creating [0001.920] E> "configs" doesn't exist, creating [0001.924] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.929] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.940] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.945] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.956] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.962] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.972] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50 [0001.979] E> "i2c@c250000" doesn't exist, creating [0001.984] E> "module@0x50" doesn't exist, creating [0001.989] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57 [0001.996] E> "module@0x57" doesn't exist, creating [0002.001] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54 [0002.008] E> "i2c@3180000" doesn't exist, creating [0002.013] E> "module@0x54" doesn't exist, creating [0002.019] I> Adding plugin-manager/ids/3310-1000-B00-E [0002.026] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.032] I> Adding plugin-manager/configs/3310-power-config 00 [0002.038] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.043] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.049] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.055] I> Adding plugin-manager/configs/3310-display-config 00 [0002.061] E> "chip-id" doesn't exist, creating [0002.065] I> Adding plugin-manager/chip-id/A02P [0002.072] I> Updated memory info to DTB [0002.077] E> "reset" doesn't exist, creating [0002.081] E> "pmc-reset-reason" doesn't exist, creating [0002.087] E> "pmic-reset-reason" doesn't exist, creating [0002.092] I> disabled_core_mask: 0xffffff0c [0002.103] I> tegrabl_load_kernel_and_dtb: Done U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... starting USB... No controllers found USB is stopped. Please issue 'usb start' first. starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ERROR: phy_startup() failed: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 ethernet@2490000 Waiting for PHY auto negotiation to complete....... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-tegra186 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set Config file not found starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.208 (282 ms) Using ethernet@2490000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.208 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: T T T T T T T T T T Retry count exceeded; starting again ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ERROR: phy_startup() failed: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() Tegra186 (P2771-0000-500) # ping 192.168.1.216 ethernet@2490000 Waiting for PHY auto negotiation to complete.....user interrupt! ERROR: phy_startup() failed: -4 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -4 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() ping failed; host 192.168.1.216 is not alive Tegra186 (P2771-0000-500) # ping 192.168.1.208 ethernet@2490000 Waiting for PHY auto negotiation to complete...user interrupt! ERROR: phy_startup() failed: -4 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -4 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() ping failed; host 192.168.1.208 is not alive Tegra186 (P2771-0000-500) # ping 192.168.1.1 ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ERROR: phy_startup() failed: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() ping failed; host 192.168.1.1 is not alive Tegra186 (P2771-0000-500) # [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291) [0000.191] I> Default Heap @ [0xd486400 - 0xd488400] [0000.196] I> DMA Heap @ [0x84900000 - 0x85300000] [0000.201] I> bit @ 0xd480000 [0000.204] I> BR-BCT relocated to 0xf7f20000 [0000.208] I> Boot-device: eMMC [0000.212] I> pmic: reset reason (nverc) : 0x80 [0000.216] I> Reading GPT from 512 for device 00000003 [0000.222] I> Reading GPT from 8388096 for device 00000003 [0000.229] I> Found 6 partitions in 00000003 device [0000.234] I> Reading GPT from 512 for device 00010003 [0000.240] I> Found 17 partitions in 00010003 device [0000.246] W> No valid slot number is found in scratch register [0000.251] W> Return default slot: _a [0000.255] I> A/B: bin_type (16) slot 0 [0000.258] I> Select partition: bpmp-fw [0000.262] I> Loading partition bpmp-fw at 0xf7600000 [0000.267] I> Reading two headers - addr:0xf7600000 blocks:1 [0000.272] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1 [0000.287] I> Binary(16) of size 524480 is loaded @ 0xf7600000 [0000.293] W> No valid slot number is found in scratch register [0000.298] W> Return default slot: _a [0000.302] I> A/B: bin_type (17) slot 0 [0000.305] I> Select partition: bpmp-fw-dtb [0000.309] I> Loading partition bpmp-fw-dtb at 0xf77f0000 [0000.314] I> Reading two headers - addr:0xf77f0000 blocks:1 [0000.320] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1 [0000.332] I> Binary(17) of size 326672 is loaded @ 0xf77b0200 [0000.459] I> BPMP-FW load address = 0xf7600000 [0000.464] I> BPMP-FW DTB load address = 0x501b0200 [0000.468] I> Loading SCE-FW ... [0000.471] W> No valid slot number is found in scratch register [0000.477] W> Return default slot: _a [0000.481] I> A/B: bin_type (12) slot 0 [0000.484] I> Select partition: sce-fw [0000.488] I> Loading partition sce-fw at 0xf7800000 [0000.492] I> Reading two headers - addr:0xf7800000 blocks:1 [0000.498] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1 [0000.506] I> Binary(12) of size 65088 is loaded @ 0xf7800000 [0000.512] I> Init SCE [0000.514] I> Copy BTCM section [0000.517] W> No valid slot number is found in scratch register [0000.523] W> Return default slot: _a [0000.526] I> A/B: bin_type (13) slot 0 [0000.530] I> Select partition: cpu-bootloader [0000.534] I> Loading partition cpu-bootloader at 0x96000000 [0000.539] I> Reading two headers - addr:0x96000000 blocks:1 [0000.545] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1 [0000.555] I> Binary(13) of size 195776 is loaded @ 0x96000000 [0000.561] W> No valid slot number is found in scratch register [0000.566] W> Return default slot: _a [0000.570] I> A/B: bin_type (20) slot 0 [0000.574] I> Select partition: bootloader-dtb [0000.578] I> Loading partition bootloader-dtb at 0x85300000 [0000.583] I> Reading two headers - addr:0x85300000 blocks:1 [0000.589] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1 [0000.599] I> Binary(20) of size 248032 is loaded @ 0x85300000 [0000.605] I> MB2-params @ 0xf7f00000 [0000.609] I> CPUBL-params @ 0xf7f00000 [0000.612] I> CPU-BL loaded at : 0x96000000 [0000.616] I> Loading TOS ... [0000.619] W> No valid slot number is found in scratch register [0000.625] W> Return default slot: _a [0000.628] I> A/B: bin_type (14) slot 0 [0000.632] I> Select partition: secure-os [0000.635] I> Loading partition secure-os at 0x8490f400 [0000.640] I> Reading two headers - addr:0x8490f400 blocks:1 [0000.646] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1 [0000.654] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0000.660] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0000.667] I> Erasing Monitor @ 0x8490f600 [0000.671] I> Unhalting SCE [0000.675] I> Waypoint2-ACK: 0x5200b8d0 [0000.679] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.041] I> Welcome to Cboot [0001.044] I> Cboot Version: 00.00.2014.50-t186-fabbc56c [0001.049] I> CPU-BL Params @ 0xf7f00000 [0001.052] I> 0) Base:0x00000000 Size:0x00000000 [0001.057] I> 1) Base:0xf7e00000 Size:0x00100000 [0001.061] I> 2) Base:0xf7d00000 Size:0x00100000 [0001.065] I> 3) Base:0xf7c00000 Size:0x00100000 [0001.070] I> 4) Base:0xf7b00000 Size:0x00100000 [0001.074] I> 5) Base:0xf7a00000 Size:0x00100000 [0001.079] I> 6) Base:0xf7600000 Size:0x00200000 [0001.083] I> 7) Base:0xf7000000 Size:0x00400000 [0001.088] I> 8) Base:0xf7900000 Size:0x00100000 [0001.092] I> 9) Base:0xf7800000 Size:0x00100000 [0001.096] I> 10) Base:0xf6800000 Size:0x00800000 [0001.101] I> 11) Base:0x30000000 Size:0x00040000 [0001.105] I> 12) Base:0xf7500000 Size:0x00100000 [0001.110] I> 13) Base:0x30040000 Size:0x00001000 [0001.114] I> 14) Base:0x30048000 Size:0x00001000 [0001.119] I> 15) Base:0x30049000 Size:0x00001000 [0001.123] I> 16) Base:0x3004a000 Size:0x00001000 [0001.127] I> 17) Base:0x3004b000 Size:0x00001000 [0001.132] I> 18) Base:0x3004c000 Size:0x00001000 [0001.136] I> 19) Base:0x3004d000 Size:0x00001000 [0001.141] I> 20) Base:0x3004e000 Size:0x00001000 [0001.145] I> 21) Base:0x3004f000 Size:0x00001000 [0001.150] I> 22) Base:0x00000000 Size:0x00000000 [0001.154] I> 23) Base:0xf7ff0000 Size:0x00010000 [0001.158] I> 24) Base:0x00000000 Size:0x00000000 [0001.163] I> 25) Base:0x00000000 Size:0x00000000 [0001.167] I> 26) Base:0x00000000 Size:0x00000000 [0001.172] I> 27) Base:0x00000000 Size:0x00000000 [0001.176] I> 28) Base:0x84400000 Size:0x00400000 [0001.181] I> 29) Base:0x30000000 Size:0x00010000 [0001.185] I> 30) Base:0xf8000000 Size:0x08000000 [0001.189] I> 31) Base:0x00000000 Size:0x00000000 [0001.194] I> 32) Base:0xf6000000 Size:0x00600000 [0001.198] I> 33) Base:0x80000000 Size:0x76000000 [0001.203] I> 34) Base:0x100000000 Size:0x180000000 [0001.207] I> 35) Base:0x00000000 Size:0x00000000 [0001.212] I> 36) Base:0x00000000 Size:0x00000000 [0001.216] I> 37) Base:0xf7fc0000 Size:0x00020000 [0001.221] I> 38) Base:0x84000000 Size:0x00400000 [0001.225] I> 39) Base:0x96000000 Size:0x02000000 [0001.230] I> 40) Base:0x84800000 Size:0x00b00000 [0001.234] I> 41) Base:0xf7f00000 Size:0x00080000 [0001.238] I> 42) Base:0x00000000 Size:0x00000000 [0001.243] I> 43) Base:0x00000000 Size:0x00000000 [0001.247] platform_init_interrupts-121, 1* [0001.252] Interrupts Init done [0001.255] calling constructors [0001.258] initializing heap [0001.260] initializing threads [0001.264] initializing timers [0001.267] creating bootstrap completion thread [0001.271] top of bootstrap2() [0001.274] CPU: ARM Cortex A57 [0001.277] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.282] initializing platform [0001.286] I> Boot-device: eMMC [0001.289] I> odm data is 1090000 [0001.292] I> Reading GPT from 512 for device 00000003 [0001.298] I> Reading GPT from 8388096 for device 00000003 [0001.305] I> Found 6 partitions in 00000003 device [0001.309] I> Reading GPT from 512 for device 00010003 [0001.315] I> Found 17 partitions in 00010003 device [0001.320] W> No valid slot number is found in scratch register [0001.325] W> Return default slot: _a [0001.329] I> A/B: bin_type (1) slot 0 [0001.332] I> Select partition: kernel-dtb [0001.336] I> Loading partition kernel-dtb at 0x92000000 [0001.345] I> Kernel_dtb @0x92000000 [0001.348] I> Bl_dtb @0x85300000 [0001.351] I> gpio framework initialized [0001.355] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.362] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.370] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.378] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.385] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.394] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.402] E> tegrabl_blob_init: BMP partition does not have valid Blob [0001.408] E> tegrabl_load_bmp_blob: BMP blob initialization failed [0001.414] W> Loading bmp blob to memory failed [0001.422] I> Find /i2c@c250000's alias i2c7 [0001.426] I> Reading eeprom i2c=7 address=0x50 [0001.456] I> Device at /i2c@c250000:0x50 [0001.459] I> Reading eeprom i2c=7 address=0x57 [0001.488] I> Device at /i2c@c250000:0x57 [0001.493] I> Find /i2c@c240000's alias i2c1 [0001.497] I> Reading eeprom i2c=1 address=0x51 [0001.503] I> Eeprom read failed 0x1a800027 [0001.507] I> Find /i2c@3160000's alias i2c0 [0001.511] I> Reading eeprom i2c=0 address=0x50 [0001.516] I> Eeprom read failed 0x1a800027 [0001.521] I> Find /i2c@3180000's alias i2c2 [0001.525] I> Reading eeprom i2c=2 address=0x54 [0001.530] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.560] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.565] I> Device at /i2c@3180000:0x54 [0001.569] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.574] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.585] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.590] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.601] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.606] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.617] initializing target [0001.620] calling apps_init() [0001.623] starting app android_boot_app [0001.627] I> Gpio keyboard init success [0001.631] I> Kernel type = Normal [0001.634] I> Loading kernel/boot.img ... [0001.638] W> No valid slot number is found in scratch register [0001.644] W> Return default slot: _a [0001.647] I> A/B: bin_type (0) slot 0 [0001.650] I> Select partition: kernel [0001.654] I> Loading partition kernel at 0xa8000000 [0001.735] W> No valid slot number is found in scratch register [0001.741] W> Return default slot: _a [0001.744] I> A/B: bin_type (1) slot 0 [0001.748] I> Select partition: kernel-dtb [0001.751] I> Loading partition kernel-dtb at 0x92000000 [0001.760] I> Kernel DTB @ 0x92000000 [0001.764] I> Verified boot state = Orange [0001.767] E> tegrabl_display_clear: display is not initialized [0001.773] I> Checking boot.img header magic ... [0001.777] I> [OK] [0001.779] I> Valid boot.img @ 0xa8000000 [0001.783] I> decompressor handler not found [0001.787] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.794] I> Done [0001.796] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000 [0001.805] I> Updated bpmp info to DTB [0001.811] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb [0001.816] I> Updated initrd info to DTB [0001.820] I> disabled_core_mask: 0xffffff0c [0001.824] I> Kernel type = Normal [0001.827] I> add_serialno: Serial Num = 0320817136116 [0001.832] W> No valid slot number is found in scratch register [0001.837] W> Return default slot: _a [0001.841] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0 [0001.880] I> Updated bootarg info to DTB [0001.885] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0 [0001.891] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1 [0001.897] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2 [0001.903] E> "ids" doesn't exist, creating [0001.907] E> "connection" doesn't exist, creating [0001.912] E> "configs" doesn't exist, creating [0001.916] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.921] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.932] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.938] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.948] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.954] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.964] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50 [0001.972] E> "i2c@c250000" doesn't exist, creating [0001.976] E> "module@0x50" doesn't exist, creating [0001.981] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57 [0001.988] E> "module@0x57" doesn't exist, creating [0001.993] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54 [0002.000] E> "i2c@3180000" doesn't exist, creating [0002.005] E> "module@0x54" doesn't exist, creating [0002.011] I> Adding plugin-manager/ids/3310-1000-B00-E [0002.018] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.024] I> Adding plugin-manager/configs/3310-power-config 00 [0002.030] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.035] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.041] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.047] I> Adding plugin-manager/configs/3310-display-config 00 [0002.053] E> "chip-id" doesn't exist, creating [0002.057] I> Adding plugin-manager/chip-id/A02P [0002.064] I> Updated memory info to DTB [0002.069] E> "reset" doesn't exist, creating [0002.073] E> "pmc-reset-reason" doesn't exist, creating [0002.079] E> "pmic-reset-reason" doesn't exist, creating [0002.084] I> disabled_core_mask: 0xffffff0c [0002.095] I> tegrabl_load_kernel_and_dtb: Done U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... starting USB... No controllers found USB is stopped. Please issue 'usb start' first. starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ERROR: phy_startup() failed: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 ethernet@2490000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-tegra186 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set Config file not found starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17 Retry time exceeded; starting again ethernet@2490000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17 Retry time exceeded; starting again Tegra186 (P2771-0000-500) # CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Online 0:15 | ttyUSB0
Here is the log output during flash and then restart.

[0265.489] I> allocated(CO:15) base:0x30049000 size:0x1000 align: 0x0
[0265.495] I> allocated(CO:16) base:0x3004a000 size:0x1000 align: 0x0
[0265.501] I> allocated(CO:17) base:0x3004b000 size:0x1000 align: 0x0
[0265.507] I> allocated(CO:19) base:0x3004d000 size:0x1000 align: 0x0
[0265.514] I> allocated(CO:18) base:0x3004c000 size:0x1000 align: 0x0
[0265.520] I> allocated(CO:20) base:0x3004e000 size:0x1000 align: 0x0
[0265.526] I> allocated(CO:21) base:0x3004f000 size:0x1000 align: 0x0
[0265.532] I> allocated(CO:22) base:0x0 size:0x0 align: 0x0
[0265.538] I> allocated(CO:32) base:0xf6000000 size:0x600000 align: 0x400000
[0265.545] I> allocated(CO:24) base:0x0 size:0x0 align: 0x0
[0265.550] I> allocated(CO:25) base:0x0 size:0x0 align: 0x0
[0265.555] I> allocated(CO:26) base:0x0 size:0x0 align: 0x0
[0265.561] I> allocated(CO:39) base:0x96000000 size:0x2000000 align: 0x2000000
[0265.568] I> allocated(CO:38) base:0x84000000 size:0x400000 align: 0x400000
[0265.575] I> allocated(CO:37) base:0xf7fc0000 size:0x20000 align: 0x20000
[0265.581] I> allocated(CO:40) base:0x84800000 size:0xb00000 align: 0x800000
[0265.588] I> allocated(CO:41) base:0xf7f00000 size:0x80000 align: 0x80000
[0265.595] I> allocated(CO:28) base:0x84400000 size:0x400000 align: 0x400000
[0265.603] I> Boot-device: eMMC
[0265.606] I> sdmmc bdev is already initialized
[0265.610] W> MB1 PMIC CFG is version 1.2
[0265.614] W> Rail ID 7 is not found on MB1 BCT
[0265.618] W> MB1 PMIC CFG is version 1.2
[0265.624] W> MB1 PMIC CFG is version 1.2
[0265.632] W> MB1 PMIC CFG is version 1.2
[0265.636] I> sdram slot : 1
[0265.638] I> Initializing SDRAM
[0265.645] I> mss encrypt status check successful
[0265.649] I> downloaded image bct_mb1 successfully
[0266.040] I> Downloading blob at 0x0000000085300000
[0266.423] I> downloaded image blob successfully
[0266.453] I> exiting nv3p server
[0266.456] I> disabled_core_mask: 0xffffff0c
[0266.460] I> Enabled Cores: 0xf3
[0266.463] I> TPC disable fuse status: 0
[0266.467] I> Booting Parker Sku
[0266.470] I> Setup temp. GSC#29 (base:0x30000000, size:0x00010000)
[0266.476] I> Loading preboot
[0266.481] I> Binary(1) of size 59024 is loaded @ 0x40000000
[0266.486] I> Restrict GSC#29 access to DPMU only
[0266.491] I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
[0266.495] I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
[0266.500] I> WP0 triggered
[0266.503] I> Waypoint-0 ACK received :)
[0266.507] I> WP0.5 triggered
[0266.510] I> Initialized SCRs
[0266.513] W> MB1 PMIC CFG is version 1.2
[0266.521] W> MB1 PMIC CFG is version 1.2
[0266.571] I> Waypoint-0.5 ACK received :)
[0266.575] I> Setup temp. GSC#28 (base:0x84400000, size:0x00400000)
[0266.581] I> Loading MTS-DMCE
[0266.595] I> Binary(2) of size 266624 is loaded @ 0x84400000
[0266.601] I> disabled_core_mask: 0xffffff0c
[0266.605] I> Loading MTS-PROPER
[0266.608] I> Binary(3) of size 1809872 is loaded @ 0x0
[0266.613] I> Restrict GSC#28 access to DPMU only
[0266.617] I> disabled_core_mask: 0xffffff0c
[0266.621] I> WP1 triggered
[0266.624] I> Loading MB2
[0266.627] I> Binary(8) of size 59696 is loaded @ 0x84000000
[0266.632] W> MB1 PMIC CFG is version 1.2
[0266.637] I> Configure DMCE carveout GSC#13
[0266.641] I> CPU reset vector: 0x96000000
[0266.645] I> MB2-params @ 0xf7f00000
[0266.649] I> Waypoint-1 ACK received :)
[0266.653] I> Configure SC7 carveout GSC#23
[0266.657] I> MB1 recovery done

[0266.663] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-597f2c10)
[0266.672] I> Default Heap @ [0xd486400 - 0xd488400]
[0266.677] I> DMA Heap @ [0x84900000 - 0x85300000]
[0266.682] I> bit @ 0xd480000
[0266.684] I> BR-BCT relocated to 0xf7f20000
[0266.689] I> Boot-device: eMMC
[0266.693] I> pmic: reset reason (nverc) : 0x80
[0266.697] I> Reading GPT from 512 for device 00000003
[0266.703] I> Reading GPT from 8388096 for device 00000003
[0266.710] I> Found 6 partitions in 00000003 device
[0266.715] I> Reading GPT from 512 for device 00010003
[0266.721] I> Found 17 partitions in 00010003 device
[0266.729] I> Binary(16) of size 524480 is loaded @ 0xf7600000
[0266.737] I> Binary(17) of size 326672 is loaded @ 0xf77b03e0
[0266.863] I> BPMP-FW load address = 0xf7600000
[0266.868] I> BPMP-FW DTB load address = 0x501b03e0
[0266.872] I> Copy BTCM section
[0266.876] I> Binary(13) of size 143872 is loaded @ 0x96000000
[0266.882] I> MB2-params @ 0xf7f00000
[0266.885] I> CPUBL-params @ 0xf7f00000
[0266.889] I> CPU-BL loaded at : 0x96000000
[0266.893] I> Loading TOS ...
[0266.896] I> Binary(14) of size 54384 is loaded @ 0x8490f400
[0266.902] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
[0266.909] I> Erasing Monitor @ 0x8490f600
[0266.914] I> Unhalting SCE
[0266.917] I> Waypoint2-ACK: 0x5200b694
[0266.921] I> MB2(TBoot-BPMP) Recovery done

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[0267.283] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-e9641362)
[0267.292] I> gpio framework initialized
[0267.296] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0267.303] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0267.310] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0267.319] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0267.326] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0267.334] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0267.342] I> CPU: ARM Cortex A57
[0267.345] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100
[0267.349] I> L2 ECC enabled : yes
[0267.353] I> CPU-BL Params @ 0xf7f00000
[0267.356] I> 0) Base:0x00000000 Size:0x00000000
[0267.361] I> 1) Base:0xf7e00000 Size:0x00100000
[0267.365] I> 2) Base:0xf7d00000 Size:0x00100000
[0267.370] I> 3) Base:0xf7c00000 Size:0x00100000
[0267.374] I> 4) Base:0xf7b00000 Size:0x00100000
[0267.378] I> 5) Base:0xf7a00000 Size:0x00100000
[0267.383] I> 6) Base:0xf7600000 Size:0x00200000
[0267.387] I> 7) Base:0xf7000000 Size:0x00400000
[0267.392] I> 8) Base:0xf7900000 Size:0x00100000
[0267.396] I> 9) Base:0xf7800000 Size:0x00100000
[0267.401] I> 10) Base:0xf6800000 Size:0x00800000
[0267.405] I> 11) Base:0x30000000 Size:0x00040000
[0267.409] I> 12) Base:0xf7500000 Size:0x00100000
[0267.414] I> 13) Base:0x30040000 Size:0x00001000
[0267.418] I> 14) Base:0x30048000 Size:0x00001000
[0267.423] I> 15) Base:0x30049000 Size:0x00001000
[0267.427] I> 16) Base:0x3004a000 Size:0x00001000
[0267.432] I> 17) Base:0x3004b000 Size:0x00001000
[0267.436] I> 18) Base:0x3004c000 Size:0x00001000
[0267.440] I> 19) Base:0x3004d000 Size:0x00001000
[0267.445] I> 20) Base:0x3004e000 Size:0x00001000
[0267.449] I> 21) Base:0x3004f000 Size:0x00001000
[0267.454] I> 22) Base:0x00000000 Size:0x00000000
[0267.458] I> 23) Base:0xf7ff0000 Size:0x00010000
[0267.463] I> 24) Base:0x00000000 Size:0x00000000
[0267.467] I> 25) Base:0x00000000 Size:0x00000000
[0267.471] I> 26) Base:0x00000000 Size:0x00000000
[0267.476] I> 27) Base:0x00000000 Size:0x00000000
[0267.480] I> 28) Base:0x84400000 Size:0x00400000
[0267.485] I> 29) Base:0x30000000 Size:0x00010000
[0267.489] I> 30) Base:0xf8000000 Size:0x08000000
[0267.494] I> 31) Base:0x00000000 Size:0x00000000
[0267.498] I> 32) Base:0xf6000000 Size:0x00600000
[0267.502] I> 33) Base:0x80000000 Size:0x76000000
[0267.507] I> 34) Base:0x100000000 Size:0x180000000
[0267.512] I> 35) Base:0x00000000 Size:0x00000000
[0267.516] I> 36) Base:0x00000000 Size:0x00000000
[0267.520] I> 37) Base:0xf7fc0000 Size:0x00020000
[0267.525] I> 38) Base:0x84000000 Size:0x00400000
[0267.529] I> 39) Base:0x96000000 Size:0x02000000
[0267.534] I> 40) Base:0x84800000 Size:0x00b00000
[0267.538] I> 41) Base:0xf7f00000 Size:0x00080000
[0267.543] I> 42) Base:0x00000000 Size:0x00000000
[0267.547] I> 43) Base:0x00000000 Size:0x00000000
[0267.551] I> Boot-device: eMMC
[0267.576] I> sdmmc ddr50 mode
[0267.579] I> sdmmc bdev is already initialized
[0267.584] I> Reading GPT from 512 for device 00000003
[0267.589] I> Reading GPT from 8388096 for device 00000003
[0267.596] I> Found 6 partitions in 00000003 device
[0267.600] I> Reading GPT from 512 for device 00010003
[0267.606] I> Found 17 partitions in 00010003 device
[0267.611] I> Recovery boot_type: 0
[0267.614] I> Entering 3p server
[0267.617] I> Entering into 3p server..
[0267.621] I> Transport interface is USB
[0268.066] I> transport_usbf_priv_open USB configuration success
[0271.504] I> Populate storage info
[0271.519] I> Erasing device 0: 3
[0271.522] I> Erasing device 16384 blocks from block 0
[0271.543] I> Erase successful.
[0271.547] I> Writing device 0: 3
[0271.551] I> Total write size is 16896 bytes
[0271.594] I> Reading GPT from 512 for device 00000003
[0271.600] I> Reading GPT from 8388096 for device 00000003
[0271.606] I> Found 6 partitions in 00000003 device
[0271.611] I> Write successful.
[0271.615] I> Erasing device 1: 3
[0271.618] I> Erasing device 61071360 blocks from block 0
[0272.753] I> Erase successful.
[0272.757] I> Writing device 1: 3
[0272.760] I> Total write size is 512 bytes
[0272.766] I> Write successful.
[0272.770] I> Writing device 1: 3
[0272.773] I> Total write size is 2688 bytes
[0272.779] I> Reading GPT from 512 for device 00010003
[0272.785] I> Found 17 partitions in 00010003 device
[0272.789] I> Write successful.
[0272.793] I> Writing device 1: 3
[0272.796] I> Total write size is 16896 bytes
[0272.802] I> Reading GPT from 512 for device 00010003
[0272.808] I> Found 17 partitions in 00010003 device
[0272.813] I> Write successful.
[0272.817] I> Writing mb1 partition
[0272.820] I> Total write size is 88368 bytes
[0272.847] I> Write successful.
[0272.851] I> Writing spe-fw partition
[0272.855] I> Total write size is 57184 bytes
[0272.883] I> Write successful.
[0272.887] I> Writing mb2 partition
[0272.890] I> Total write size is 60720 bytes
[0272.924] I> Write successful.
[0272.928] I> Writing mts-preboot partition
[0272.932] I> Total write size is 59824 bytes
[0272.971] I> Write successful.
[0272.975] I> Writing device 1: 3
[0272.978] I> Total write size is 512 bytes
[0272.983] I> Write successful.
[0272.987] I> Writing APP partition
[0272.990] I> Total write size is 3359367596 bytes
[0412.121] I> Write successful.
[0412.125] I> Writing mts-bootpack partition
[0412.129] I> Total write size is 2077344 bytes
[0412.217] I> Write successful.
[0412.221] I> Writing cpu-bootloader partition
[0412.225] I> Total write size is 196176 bytes
[0412.245] I> Write successful.
[0412.249] I> Writing bootloader-dtb partition
[0412.254] I> Total write size is 248432 bytes
[0412.272] I> Write successful.
[0412.276] I> Writing secure-os partition
[0412.279] I> Total write size is 54784 bytes
[0412.287] I> Write successful.
[0412.291] I> Writing eks partition
[0412.294] I> Total write size is 1488 bytes
[0412.300] I> Write successful.
[0412.304] I> Writing bpmp-fw partition
[0412.308] I> Total write size is 524880 bytes
[0412.334] I> Write successful.
[0412.338] I> Writing bpmp-fw-dtb partition
[0412.342] I> Total write size is 327072 bytes
[0412.361] I> Write successful.
[0412.364] I> Writing sce-fw partition
[0412.368] I> Total write size is 65488 bytes
[0412.377] I> Write successful.
[0412.380] I> Writing sc7 partition
[0412.384] I> Total write size is 20848 bytes
[0412.390] I> Write successful.
[0412.394] I> Writing kernel partition
[0412.398] I> Total write size is 6717440 bytes
[0412.682] I> Write successful.
[0412.686] I> Writing kernel-dtb partition
[0412.690] I> Total write size is 248032 bytes
[0412.706] I> Write successful.
[0412.716] I> Writing BCT partition
[0412.719] I> Total write size is 3584 bytes
[0412.763] I> Write successful.
[0412.780] I> Writing MB1_BCT partition
[0412.784] I> Total write size is 49968 bytes
[0412.824] I> Write successful.
[0412.835] I> Rebooting : reset-coldboot


[0000.191] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
[0000.199] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.204] I> DMA Heap @ [0x84900000 - 0x85300000]
[0000.209] I> bit @ 0xd480000
[0000.211] I> BR-BCT relocated to 0xf7f20000
[0000.216] I> Boot-device: eMMC
[0000.220] I> pmic: reset reason (nverc) : 0x0
[0000.224] I> Reading GPT from 512 for device 00000003
[0000.230] I> Reading GPT from 8388096 for device 00000003
[0000.237] I> Found 6 partitions in 00000003 device
[0000.241] I> Reading GPT from 512 for device 00010003
[0000.248] I> Found 17 partitions in 00010003 device
[0000.253] W> No valid slot number is found in scratch register
[0000.259] W> Return default slot: _a
[0000.262] I> A/B: bin_type (16) slot 0
[0000.266] I> Select partition: bpmp-fw
[0000.269] I> Loading partition bpmp-fw at 0xf7600000
[0000.274] I> Reading two headers - addr:0xf7600000 blocks:1
[0000.280] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
[0000.295] I> Binary(16) of size 524480 is loaded @ 0xf7600000
[0000.300] W> No valid slot number is found in scratch register
[0000.306] W> Return default slot: _a
[0000.309] I> A/B: bin_type (17) slot 0
[0000.313] I> Select partition: bpmp-fw-dtb
[0000.317] I> Loading partition bpmp-fw-dtb at 0xf77f0000
[0000.322] I> Reading two headers - addr:0xf77f0000 blocks:1
[0000.328] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
[0000.339] I> Binary(17) of size 326672 is loaded @ 0xf77b0200
[0000.467] I> BPMP-FW load address = 0xf7600000
[0000.471] I> BPMP-FW DTB load address = 0x501b0200
[0000.476] I> Loading SCE-FW ...
[0000.479] W> No valid slot number is found in scratch register
[0000.485] W> Return default slot: _a
[0000.488] I> A/B: bin_type (12) slot 0
[0000.492] I> Select partition: sce-fw
[0000.495] I> Loading partition sce-fw at 0xf7800000
[0000.500] I> Reading two headers - addr:0xf7800000 blocks:1
[0000.506] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
[0000.514] I> Binary(12) of size 65088 is loaded @ 0xf7800000
[0000.520] I> Init SCE
[0000.522] I> Copy BTCM section
[0000.525] W> No valid slot number is found in scratch register
[0000.530] W> Return default slot: _a
[0000.534] I> A/B: bin_type (13) slot 0
[0000.537] I> Select partition: cpu-bootloader
[0000.542] I> Loading partition cpu-bootloader at 0x96000000
[0000.547] I> Reading two headers - addr:0x96000000 blocks:1
[0000.553] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
[0000.563] I> Binary(13) of size 195776 is loaded @ 0x96000000
[0000.568] W> No valid slot number is found in scratch register
[0000.574] W> Return default slot: _a
[0000.578] I> A/B: bin_type (20) slot 0
[0000.581] I> Select partition: bootloader-dtb
[0000.585] I> Loading partition bootloader-dtb at 0x85300000
[0000.591] I> Reading two headers - addr:0x85300000 blocks:1
[0000.596] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
[0000.607] I> Binary(20) of size 248032 is loaded @ 0x85300000
[0000.613] I> MB2-params @ 0xf7f00000
[0000.616] I> CPUBL-params @ 0xf7f00000
[0000.620] I> CPU-BL loaded at : 0x96000000
[0000.624] I> Loading TOS ...
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (14) slot 0
[0000.639] I> Select partition: secure-os
[0000.643] I> Loading partition secure-os at 0x8490f400
[0000.648] I> Reading two headers - addr:0x8490f400 blocks:1
[0000.654] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
[0000.662] I> Binary(14) of size 54384 is loaded @ 0x8490f400
[0000.668] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
[0000.675] I> Erasing Monitor @ 0x8490f600
[0000.679] I> Unhalting SCE
[0000.683] I> Waypoint2-ACK: 0x5200b8d0
[0000.687] I> MB2(TBoot-BPMP) done

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[0001.049] I> Welcome to Cboot
[0001.052] I> Cboot Version: 00.00.2014.50-t186-fabbc56c
[0001.057] I> CPU-BL Params @ 0xf7f00000
[0001.060] I> 0) Base:0x00000000 Size:0x00000000
[0001.065] I> 1) Base:0xf7e00000 Size:0x00100000
[0001.069] I> 2) Base:0xf7d00000 Size:0x00100000
[0001.074] I> 3) Base:0xf7c00000 Size:0x00100000
[0001.078] I> 4) Base:0xf7b00000 Size:0x00100000
[0001.082] I> 5) Base:0xf7a00000 Size:0x00100000
[0001.087] I> 6) Base:0xf7600000 Size:0x00200000
[0001.091] I> 7) Base:0xf7000000 Size:0x00400000
[0001.096] I> 8) Base:0xf7900000 Size:0x00100000
[0001.100] I> 9) Base:0xf7800000 Size:0x00100000
[0001.105] I> 10) Base:0xf6800000 Size:0x00800000
[0001.109] I> 11) Base:0x30000000 Size:0x00040000
[0001.113] I> 12) Base:0xf7500000 Size:0x00100000
[0001.118] I> 13) Base:0x30040000 Size:0x00001000
[0001.122] I> 14) Base:0x30048000 Size:0x00001000
[0001.127] I> 15) Base:0x30049000 Size:0x00001000
[0001.131] I> 16) Base:0x3004a000 Size:0x00001000
[0001.136] I> 17) Base:0x3004b000 Size:0x00001000
[0001.140] I> 18) Base:0x3004c000 Size:0x00001000
[0001.144] I> 19) Base:0x3004d000 Size:0x00001000
[0001.149] I> 20) Base:0x3004e000 Size:0x00001000
[0001.153] I> 21) Base:0x3004f000 Size:0x00001000
[0001.158] I> 22) Base:0x00000000 Size:0x00000000
[0001.162] I> 23) Base:0xf7ff0000 Size:0x00010000
[0001.167] I> 24) Base:0x00000000 Size:0x00000000
[0001.171] I> 25) Base:0x00000000 Size:0x00000000
[0001.175] I> 26) Base:0x00000000 Size:0x00000000
[0001.180] I> 27) Base:0x00000000 Size:0x00000000
[0001.184] I> 28) Base:0x84400000 Size:0x00400000
[0001.189] I> 29) Base:0x30000000 Size:0x00010000
[0001.193] I> 30) Base:0xf8000000 Size:0x08000000
[0001.198] I> 31) Base:0x00000000 Size:0x00000000
[0001.202] I> 32) Base:0xf6000000 Size:0x00600000
[0001.206] I> 33) Base:0x80000000 Size:0x76000000
[0001.211] I> 34) Base:0x100000000 Size:0x180000000
[0001.215] I> 35) Base:0x00000000 Size:0x00000000
[0001.220] I> 36) Base:0x00000000 Size:0x00000000
[0001.224] I> 37) Base:0xf7fc0000 Size:0x00020000
[0001.229] I> 38) Base:0x84000000 Size:0x00400000
[0001.233] I> 39) Base:0x96000000 Size:0x02000000
[0001.238] I> 40) Base:0x84800000 Size:0x00b00000
[0001.242] I> 41) Base:0xf7f00000 Size:0x00080000
[0001.246] I> 42) Base:0x00000000 Size:0x00000000
[0001.251] I> 43) Base:0x00000000 Size:0x00000000
[0001.255] platform_init_interrupts-121, 1*
[0001.260] Interrupts Init done
[0001.263] calling constructors
[0001.266] initializing heap
[0001.268] initializing threads
[0001.272] initializing timers
[0001.275] creating bootstrap completion thread
[0001.279] top of bootstrap2()
[0001.282] CPU: ARM Cortex A57
[0001.285] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.290] initializing platform
[0001.294] I> Boot-device: eMMC
[0001.297] I> odm data is 1090000
[0001.300] I> Reading GPT from 512 for device 00000003
[0001.306] I> Reading GPT from 8388096 for device 00000003
[0001.313] I> Found 6 partitions in 00000003 device
[0001.317] I> Reading GPT from 512 for device 00010003
[0001.323] I> Found 17 partitions in 00010003 device
[0001.328] W> No valid slot number is found in scratch register
[0001.333] W> Return default slot: _a
[0001.337] I> A/B: bin_type (1) slot 0
[0001.340] I> Select partition: kernel-dtb
[0001.344] I> Loading partition kernel-dtb at 0x92000000
[0001.353] I> Kernel_dtb @0x92000000
[0001.356] I> Bl_dtb @0x85300000
[0001.359] I> gpio framework initialized
[0001.363] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.370] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.378] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.386] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.393] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.402] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.409] E> tegrabl_blob_init: BMP partition does not have valid Blob
[0001.416] E> tegrabl_load_bmp_blob: BMP blob initialization failed
[0001.422] W> Loading bmp blob to memory failed
[0001.430] I> Find /i2c@c250000's alias i2c7
[0001.434] I> Reading eeprom i2c=7 address=0x50
[0001.463] I> Device at /i2c@c250000:0x50
[0001.467] I> Reading eeprom i2c=7 address=0x57
[0001.496] I> Device at /i2c@c250000:0x57
[0001.501] I> Find /i2c@c240000's alias i2c1
[0001.505] I> Reading eeprom i2c=1 address=0x51
[0001.511] I> Eeprom read failed 0x1a800027
[0001.515] I> Find /i2c@3160000's alias i2c0
[0001.519] I> Reading eeprom i2c=0 address=0x50
[0001.524] I> Eeprom read failed 0x1a800027
[0001.529] I> Find /i2c@3180000's alias i2c2
[0001.533] I> Reading eeprom i2c=2 address=0x54
[0001.538] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.568] I> Disabling gpio chip_id = 2, gpio pin = 9
[0001.573] I> Device at /i2c@3180000:0x54
[0001.577] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.582] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.593] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.598] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.609] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.614] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.625] initializing target
[0001.628] calling apps_init()
[0001.631] starting app android_boot_app
[0001.635] I> Gpio keyboard init success
[0001.639] I> Kernel type = Normal
[0001.642] I> Loading kernel/boot.img ...
[0001.646] W> No valid slot number is found in scratch register
[0001.652] W> Return default slot: _a
[0001.655] I> A/B: bin_type (0) slot 0
[0001.658] I> Select partition: kernel
[0001.662] I> Loading partition kernel at 0xa8000000
[0001.743] W> No valid slot number is found in scratch register
[0001.749] W> Return default slot: _a
[0001.752] I> A/B: bin_type (1) slot 0
[0001.756] I> Select partition: kernel-dtb
[0001.759] I> Loading partition kernel-dtb at 0x92000000
[0001.768] I> Kernel DTB @ 0x92000000
[0001.772] I> Verified boot state = Orange
[0001.775] E> tegrabl_display_clear: display is not initialized
[0001.781] I> Checking boot.img header magic ... [0001.785] I> [OK]
[0001.787] I> Valid boot.img @ 0xa8000000
[0001.791] I> decompressor handler not found
[0001.795] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.802] I> Done
[0001.804] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000
[0001.813] I> Updated bpmp info to DTB
[0001.819] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb
[0001.824] I> Updated initrd info to DTB
[0001.828] I> disabled_core_mask: 0xffffff0c
[0001.832] I> Kernel type = Normal
[0001.835] I> add_serialno: Serial Num = 0320817136116
[0001.840] W> No valid slot number is found in scratch register
[0001.845] W> Return default slot: _a
[0001.849] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0
[0001.888] I> Updated bootarg info to DTB
[0001.893] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0
[0001.899] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1
[0001.905] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2
[0001.911] E> "ids" doesn't exist, creating
[0001.915] E> "connection" doesn't exist, creating
[0001.920] E> "configs" doesn't exist, creating
[0001.924] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.929] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.940] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.945] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.956] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.962] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.972] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
[0001.979] E> "i2c@c250000" doesn't exist, creating
[0001.984] E> "module@0x50" doesn't exist, creating
[0001.989] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
[0001.996] E> "module@0x57" doesn't exist, creating
[0002.001] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
[0002.008] E> "i2c@3180000" doesn't exist, creating
[0002.013] E> "module@0x54" doesn't exist, creating
[0002.019] I> Adding plugin-manager/ids/3310-1000-B00-E
[0002.026] I> Adding plugin-manager/configs/3310-mem-type 00
[0002.032] I> Adding plugin-manager/configs/3310-power-config 00
[0002.038] I> Adding plugin-manager/configs/3310-misc-config 00
[0002.043] I> Adding plugin-manager/configs/3310-modem-config 00
[0002.049] I> Adding plugin-manager/configs/3310-touch-config 00
[0002.055] I> Adding plugin-manager/configs/3310-display-config 00
[0002.061] E> "chip-id" doesn't exist, creating
[0002.065] I> Adding plugin-manager/chip-id/A02P
[0002.072] I> Updated memory info to DTB
[0002.077] E> "reset" doesn't exist, creating
[0002.081] E> "pmc-reset-reason" doesn't exist, creating
[0002.087] E> "pmic-reset-reason" doesn't exist, creating
[0002.092] I> disabled_core_mask: 0xffffff0c
[0002.103] I> tegrabl_load_kernel_and_dtb: Done


U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800)

TEGRA186
Model: NVIDIA P2771-0000-500
DRAM: 7.8 GiB
MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: eth0: ethernet@2490000
Hit any key to stop autoboot: 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
ERROR: phy_startup() failed: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
ethernet@2490000 Waiting for PHY auto negotiation to complete....... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-tegra186
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
Config file not found
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.208 (282 ms)
Using ethernet@2490000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.208
Filename 'boot.scr.uimg'.
Load address: 0x90000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
ERROR: phy_startup() failed: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
Tegra186 (P2771-0000-500) # ping 192.168.1.216
ethernet@2490000 Waiting for PHY auto negotiation to complete.....user interrupt!
ERROR: phy_startup() failed: -4
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -4
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
ping failed; host 192.168.1.216 is not alive
Tegra186 (P2771-0000-500) # ping 192.168.1.208
ethernet@2490000 Waiting for PHY auto negotiation to complete...user interrupt!
ERROR: phy_startup() failed: -4
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -4
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
ping failed; host 192.168.1.208 is not alive
Tegra186 (P2771-0000-500) # ping 192.168.1.1
ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
ERROR: phy_startup() failed: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
ping failed; host 192.168.1.1 is not alive
Tegra186 (P2771-0000-500) # [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
[0000.191] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.196] I> DMA Heap @ [0x84900000 - 0x85300000]
[0000.201] I> bit @ 0xd480000
[0000.204] I> BR-BCT relocated to 0xf7f20000
[0000.208] I> Boot-device: eMMC
[0000.212] I> pmic: reset reason (nverc) : 0x80
[0000.216] I> Reading GPT from 512 for device 00000003
[0000.222] I> Reading GPT from 8388096 for device 00000003
[0000.229] I> Found 6 partitions in 00000003 device
[0000.234] I> Reading GPT from 512 for device 00010003
[0000.240] I> Found 17 partitions in 00010003 device
[0000.246] W> No valid slot number is found in scratch register
[0000.251] W> Return default slot: _a
[0000.255] I> A/B: bin_type (16) slot 0
[0000.258] I> Select partition: bpmp-fw
[0000.262] I> Loading partition bpmp-fw at 0xf7600000
[0000.267] I> Reading two headers - addr:0xf7600000 blocks:1
[0000.272] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
[0000.287] I> Binary(16) of size 524480 is loaded @ 0xf7600000
[0000.293] W> No valid slot number is found in scratch register
[0000.298] W> Return default slot: _a
[0000.302] I> A/B: bin_type (17) slot 0
[0000.305] I> Select partition: bpmp-fw-dtb
[0000.309] I> Loading partition bpmp-fw-dtb at 0xf77f0000
[0000.314] I> Reading two headers - addr:0xf77f0000 blocks:1
[0000.320] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
[0000.332] I> Binary(17) of size 326672 is loaded @ 0xf77b0200
[0000.459] I> BPMP-FW load address = 0xf7600000
[0000.464] I> BPMP-FW DTB load address = 0x501b0200
[0000.468] I> Loading SCE-FW ...
[0000.471] W> No valid slot number is found in scratch register
[0000.477] W> Return default slot: _a
[0000.481] I> A/B: bin_type (12) slot 0
[0000.484] I> Select partition: sce-fw
[0000.488] I> Loading partition sce-fw at 0xf7800000
[0000.492] I> Reading two headers - addr:0xf7800000 blocks:1
[0000.498] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
[0000.506] I> Binary(12) of size 65088 is loaded @ 0xf7800000
[0000.512] I> Init SCE
[0000.514] I> Copy BTCM section
[0000.517] W> No valid slot number is found in scratch register
[0000.523] W> Return default slot: _a
[0000.526] I> A/B: bin_type (13) slot 0
[0000.530] I> Select partition: cpu-bootloader
[0000.534] I> Loading partition cpu-bootloader at 0x96000000
[0000.539] I> Reading two headers - addr:0x96000000 blocks:1
[0000.545] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
[0000.555] I> Binary(13) of size 195776 is loaded @ 0x96000000
[0000.561] W> No valid slot number is found in scratch register
[0000.566] W> Return default slot: _a
[0000.570] I> A/B: bin_type (20) slot 0
[0000.574] I> Select partition: bootloader-dtb
[0000.578] I> Loading partition bootloader-dtb at 0x85300000
[0000.583] I> Reading two headers - addr:0x85300000 blocks:1
[0000.589] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
[0000.599] I> Binary(20) of size 248032 is loaded @ 0x85300000
[0000.605] I> MB2-params @ 0xf7f00000
[0000.609] I> CPUBL-params @ 0xf7f00000
[0000.612] I> CPU-BL loaded at : 0x96000000
[0000.616] I> Loading TOS ...
[0000.619] W> No valid slot number is found in scratch register
[0000.625] W> Return default slot: _a
[0000.628] I> A/B: bin_type (14) slot 0
[0000.632] I> Select partition: secure-os
[0000.635] I> Loading partition secure-os at 0x8490f400
[0000.640] I> Reading two headers - addr:0x8490f400 blocks:1
[0000.646] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
[0000.654] I> Binary(14) of size 54384 is loaded @ 0x8490f400
[0000.660] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
[0000.667] I> Erasing Monitor @ 0x8490f600
[0000.671] I> Unhalting SCE
[0000.675] I> Waypoint2-ACK: 0x5200b8d0
[0000.679] I> MB2(TBoot-BPMP) done

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[0001.041] I> Welcome to Cboot
[0001.044] I> Cboot Version: 00.00.2014.50-t186-fabbc56c
[0001.049] I> CPU-BL Params @ 0xf7f00000
[0001.052] I> 0) Base:0x00000000 Size:0x00000000
[0001.057] I> 1) Base:0xf7e00000 Size:0x00100000
[0001.061] I> 2) Base:0xf7d00000 Size:0x00100000
[0001.065] I> 3) Base:0xf7c00000 Size:0x00100000
[0001.070] I> 4) Base:0xf7b00000 Size:0x00100000
[0001.074] I> 5) Base:0xf7a00000 Size:0x00100000
[0001.079] I> 6) Base:0xf7600000 Size:0x00200000
[0001.083] I> 7) Base:0xf7000000 Size:0x00400000
[0001.088] I> 8) Base:0xf7900000 Size:0x00100000
[0001.092] I> 9) Base:0xf7800000 Size:0x00100000
[0001.096] I> 10) Base:0xf6800000 Size:0x00800000
[0001.101] I> 11) Base:0x30000000 Size:0x00040000
[0001.105] I> 12) Base:0xf7500000 Size:0x00100000
[0001.110] I> 13) Base:0x30040000 Size:0x00001000
[0001.114] I> 14) Base:0x30048000 Size:0x00001000
[0001.119] I> 15) Base:0x30049000 Size:0x00001000
[0001.123] I> 16) Base:0x3004a000 Size:0x00001000
[0001.127] I> 17) Base:0x3004b000 Size:0x00001000
[0001.132] I> 18) Base:0x3004c000 Size:0x00001000
[0001.136] I> 19) Base:0x3004d000 Size:0x00001000
[0001.141] I> 20) Base:0x3004e000 Size:0x00001000
[0001.145] I> 21) Base:0x3004f000 Size:0x00001000
[0001.150] I> 22) Base:0x00000000 Size:0x00000000
[0001.154] I> 23) Base:0xf7ff0000 Size:0x00010000
[0001.158] I> 24) Base:0x00000000 Size:0x00000000
[0001.163] I> 25) Base:0x00000000 Size:0x00000000
[0001.167] I> 26) Base:0x00000000 Size:0x00000000
[0001.172] I> 27) Base:0x00000000 Size:0x00000000
[0001.176] I> 28) Base:0x84400000 Size:0x00400000
[0001.181] I> 29) Base:0x30000000 Size:0x00010000
[0001.185] I> 30) Base:0xf8000000 Size:0x08000000
[0001.189] I> 31) Base:0x00000000 Size:0x00000000
[0001.194] I> 32) Base:0xf6000000 Size:0x00600000
[0001.198] I> 33) Base:0x80000000 Size:0x76000000
[0001.203] I> 34) Base:0x100000000 Size:0x180000000
[0001.207] I> 35) Base:0x00000000 Size:0x00000000
[0001.212] I> 36) Base:0x00000000 Size:0x00000000
[0001.216] I> 37) Base:0xf7fc0000 Size:0x00020000
[0001.221] I> 38) Base:0x84000000 Size:0x00400000
[0001.225] I> 39) Base:0x96000000 Size:0x02000000
[0001.230] I> 40) Base:0x84800000 Size:0x00b00000
[0001.234] I> 41) Base:0xf7f00000 Size:0x00080000
[0001.238] I> 42) Base:0x00000000 Size:0x00000000
[0001.243] I> 43) Base:0x00000000 Size:0x00000000
[0001.247] platform_init_interrupts-121, 1*
[0001.252] Interrupts Init done
[0001.255] calling constructors
[0001.258] initializing heap
[0001.260] initializing threads
[0001.264] initializing timers
[0001.267] creating bootstrap completion thread
[0001.271] top of bootstrap2()
[0001.274] CPU: ARM Cortex A57
[0001.277] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.282] initializing platform
[0001.286] I> Boot-device: eMMC
[0001.289] I> odm data is 1090000
[0001.292] I> Reading GPT from 512 for device 00000003
[0001.298] I> Reading GPT from 8388096 for device 00000003
[0001.305] I> Found 6 partitions in 00000003 device
[0001.309] I> Reading GPT from 512 for device 00010003
[0001.315] I> Found 17 partitions in 00010003 device
[0001.320] W> No valid slot number is found in scratch register
[0001.325] W> Return default slot: _a
[0001.329] I> A/B: bin_type (1) slot 0
[0001.332] I> Select partition: kernel-dtb
[0001.336] I> Loading partition kernel-dtb at 0x92000000
[0001.345] I> Kernel_dtb @0x92000000
[0001.348] I> Bl_dtb @0x85300000
[0001.351] I> gpio framework initialized
[0001.355] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.362] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.370] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.378] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.385] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.394] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.402] E> tegrabl_blob_init: BMP partition does not have valid Blob
[0001.408] E> tegrabl_load_bmp_blob: BMP blob initialization failed
[0001.414] W> Loading bmp blob to memory failed
[0001.422] I> Find /i2c@c250000's alias i2c7
[0001.426] I> Reading eeprom i2c=7 address=0x50
[0001.456] I> Device at /i2c@c250000:0x50
[0001.459] I> Reading eeprom i2c=7 address=0x57
[0001.488] I> Device at /i2c@c250000:0x57
[0001.493] I> Find /i2c@c240000's alias i2c1
[0001.497] I> Reading eeprom i2c=1 address=0x51
[0001.503] I> Eeprom read failed 0x1a800027
[0001.507] I> Find /i2c@3160000's alias i2c0
[0001.511] I> Reading eeprom i2c=0 address=0x50
[0001.516] I> Eeprom read failed 0x1a800027
[0001.521] I> Find /i2c@3180000's alias i2c2
[0001.525] I> Reading eeprom i2c=2 address=0x54
[0001.530] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.560] I> Disabling gpio chip_id = 2, gpio pin = 9
[0001.565] I> Device at /i2c@3180000:0x54
[0001.569] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.574] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.585] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.590] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.601] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.606] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.617] initializing target
[0001.620] calling apps_init()
[0001.623] starting app android_boot_app
[0001.627] I> Gpio keyboard init success
[0001.631] I> Kernel type = Normal
[0001.634] I> Loading kernel/boot.img ...
[0001.638] W> No valid slot number is found in scratch register
[0001.644] W> Return default slot: _a
[0001.647] I> A/B: bin_type (0) slot 0
[0001.650] I> Select partition: kernel
[0001.654] I> Loading partition kernel at 0xa8000000
[0001.735] W> No valid slot number is found in scratch register
[0001.741] W> Return default slot: _a
[0001.744] I> A/B: bin_type (1) slot 0
[0001.748] I> Select partition: kernel-dtb
[0001.751] I> Loading partition kernel-dtb at 0x92000000
[0001.760] I> Kernel DTB @ 0x92000000
[0001.764] I> Verified boot state = Orange
[0001.767] E> tegrabl_display_clear: display is not initialized
[0001.773] I> Checking boot.img header magic ... [0001.777] I> [OK]
[0001.779] I> Valid boot.img @ 0xa8000000
[0001.783] I> decompressor handler not found
[0001.787] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.794] I> Done
[0001.796] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000
[0001.805] I> Updated bpmp info to DTB
[0001.811] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb
[0001.816] I> Updated initrd info to DTB
[0001.820] I> disabled_core_mask: 0xffffff0c
[0001.824] I> Kernel type = Normal
[0001.827] I> add_serialno: Serial Num = 0320817136116
[0001.832] W> No valid slot number is found in scratch register
[0001.837] W> Return default slot: _a
[0001.841] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0
[0001.880] I> Updated bootarg info to DTB
[0001.885] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0
[0001.891] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1
[0001.897] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2
[0001.903] E> "ids" doesn't exist, creating
[0001.907] E> "connection" doesn't exist, creating
[0001.912] E> "configs" doesn't exist, creating
[0001.916] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.921] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.932] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.938] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.948] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.954] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.964] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
[0001.972] E> "i2c@c250000" doesn't exist, creating
[0001.976] E> "module@0x50" doesn't exist, creating
[0001.981] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
[0001.988] E> "module@0x57" doesn't exist, creating
[0001.993] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
[0002.000] E> "i2c@3180000" doesn't exist, creating
[0002.005] E> "module@0x54" doesn't exist, creating
[0002.011] I> Adding plugin-manager/ids/3310-1000-B00-E
[0002.018] I> Adding plugin-manager/configs/3310-mem-type 00
[0002.024] I> Adding plugin-manager/configs/3310-power-config 00
[0002.030] I> Adding plugin-manager/configs/3310-misc-config 00
[0002.035] I> Adding plugin-manager/configs/3310-modem-config 00
[0002.041] I> Adding plugin-manager/configs/3310-touch-config 00
[0002.047] I> Adding plugin-manager/configs/3310-display-config 00
[0002.053] E> "chip-id" doesn't exist, creating
[0002.057] I> Adding plugin-manager/chip-id/A02P
[0002.064] I> Updated memory info to DTB
[0002.069] E> "reset" doesn't exist, creating
[0002.073] E> "pmc-reset-reason" doesn't exist, creating
[0002.079] E> "pmic-reset-reason" doesn't exist, creating
[0002.084] I> disabled_core_mask: 0xffffff0c
[0002.095] I> tegrabl_load_kernel_and_dtb: Done


U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800)

TEGRA186
Model: NVIDIA P2771-0000-500
DRAM: 7.8 GiB
MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: eth0: ethernet@2490000
Hit any key to stop autoboot: 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
ERROR: phy_startup() failed: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
ethernet@2490000 Waiting for PHY auto negotiation to complete........ done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-tegra186
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
Config file not found
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
Tegra186 (P2771-0000-500) #
CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Online 0:15 | ttyUSB0

#12
Posted 04/02/2017 05:38 PM   
Server IP is only looked for if all other methods of booting have failed...eMMC failed, SD card failed, so on. This should not have been reached...it implies steps for booting to standard devices have failed (it does show at least part of the hardware works, otherwise the Jetson could not have booted far enough to search). Regarding "ERROR: Error initializing runtime service trusty_fast", trusty is referred to in the apt repositories for downloading packages. [i]I can't say for certain[/i], but this step is most likely intended for after the Jetson reboots and has JetPack trying to use apt to install additional packages. The log for flash definitely is not from the flash.sh script of the driver package (and JetPack is a front end to flash.sh). Perhaps it is from something JetPack logged? Can you give more information about the source of that log and exactly which version of which flash software you are using?
Server IP is only looked for if all other methods of booting have failed...eMMC failed, SD card failed, so on. This should not have been reached...it implies steps for booting to standard devices have failed (it does show at least part of the hardware works, otherwise the Jetson could not have booted far enough to search).

Regarding "ERROR: Error initializing runtime service trusty_fast", trusty is referred to in the apt repositories for downloading packages. I can't say for certain, but this step is most likely intended for after the Jetson reboots and has JetPack trying to use apt to install additional packages.

The log for flash definitely is not from the flash.sh script of the driver package (and JetPack is a front end to flash.sh). Perhaps it is from something JetPack logged? Can you give more information about the source of that log and exactly which version of which flash software you are using?

#13
Posted 04/02/2017 05:51 PM   
so this is the output in the serial console (!) when flashing. I am using the procedure you recommended. The command is sudo -s ./flash.sh -S 28GiB jetson-tx2 mmcblk0p1 Welcome to minicom 2.7 OPTIONS: I18n Compiled on Feb 7 2016, 13:37:27. Port /dev/ttyUSB0, 20:00:39 Press CTRL-A Z for help on special keys [0049.888] I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4) [0049.896] I> rst_source : 0x0 [0049.899] I> rst_level : 0x0 [0049.902] I> Boot-device: eMMC [0049.925] I> sdmmc ddr50 mode [0049.929] I> Entering into 3p server.. [0049.932] I> Transport interface is USB [0050.377] I> transport_usbf_priv_open USB configuration success [0055.915] I> Populate eeprom info for module cvm [0105.242] I> bit @ 0xd480000 [0105.245] I> Downloading bct_bootrom at 0x000000004004e800 [0105.252] I> downloaded image bct_bootrom successfully [0105.258] I> Downloading bct_mb1 at 0x0000000040041000 [0105.268] I> MB1-BCT relocated to 0xd48bc00 from 0x40041000 [0105.274] I> Supported mb1-bct versions 9-12 [0105.278] I> Version of mb1 bct binary 12 [0105.282] W> MB1 BCT does not have controller prod config data [0105.287] I> Bootrom patch version : 31 (correctly patched) [0105.293] I> ATE fuse revision : 0x30880 [0105.297] I> chip revision : A02P [0105.300] I> disabled_core_mask: 0xffffff0c [0105.304] I> Enabled Cores: 0xf3 [0105.307] I> TPC disable fuse status: 0 [0105.311] I> Booting Parker Sku [0105.314] I> Ram repair fuse : 0x0 [0105.317] I> allocated(CO:30) base:0xf8000000 size:0x8000000 align: 0x8000000 [0105.324] I> allocated(CO:23) base:0xf7ff0000 size:0x10000 align: 0x10000 [0105.331] I> allocated(CO:31) base:0x0 size:0x0 align: 0x0 [0105.336] I> allocated(CO:1) base:0xf7e00000 size:0x100000 align: 0x100000 [0105.343] I> allocated(CO:2) base:0xf7d00000 size:0x100000 align: 0x100000 [0105.350] I> allocated(CO:3) base:0xf7c00000 size:0x100000 align: 0x100000 [0105.357] I> allocated(CO:4) base:0xf7b00000 size:0x100000 align: 0x100000 [0105.363] I> allocated(CO:5) base:0xf7a00000 size:0x100000 align: 0x100000 [0105.370] I> allocated(CO:8) base:0xf7900000 size:0x100000 align: 0x100000 [0105.377] I> allocated(CO:27) base:0x0 size:0x0 align: 0x0 [0105.382] I> allocated(CO:6) base:0xf7600000 size:0x200000 align: 0x200000 [0105.389] I> allocated(CO:7) base:0xf7000000 size:0x400000 align: 0x400000 [0105.396] I> allocated(CO:9) base:0xf7800000 size:0x100000 align: 0x100000 [0105.403] I> allocated(CO:10) base:0xf6800000 size:0x800000 align: 0x800000 [0105.410] I> allocated(CO:11) base:0x30000000 size:0x40000 align: 0x0 [0105.416] I> allocated(CO:12) base:0xf7500000 size:0x100000 align: 0x100000 [0105.423] I> allocated(CO:13) base:0x30040000 size:0x1000 align: 0x0 [0105.429] I> allocated(CO:14) base:0x30048000 size:0x1000 align: 0x0 [0105.435] I> allocated(CO:15) base:0x30049000 size:0x1000 align: 0x0 [0105.442] I> allocated(CO:16) base:0x3004a000 size:0x1000 align: 0x0 [0105.448] I> allocated(CO:17) base:0x3004b000 size:0x1000 align: 0x0 [0105.454] I> allocated(CO:19) base:0x3004d000 size:0x1000 align: 0x0 [0105.460] I> allocated(CO:18) base:0x3004c000 size:0x1000 align: 0x0 [0105.467] I> allocated(CO:20) base:0x3004e000 size:0x1000 align: 0x0 [0105.473] I> allocated(CO:21) base:0x3004f000 size:0x1000 align: 0x0 [0105.479] I> allocated(CO:22) base:0x0 size:0x0 align: 0x0 [0105.484] I> allocated(CO:32) base:0xf6000000 size:0x600000 align: 0x400000 [0105.491] I> allocated(CO:24) base:0x0 size:0x0 align: 0x0 [0105.497] I> allocated(CO:25) base:0x0 size:0x0 align: 0x0 [0105.502] I> allocated(CO:26) base:0x0 size:0x0 align: 0x0 [0105.507] I> allocated(CO:39) base:0x96000000 size:0x2000000 align: 0x2000000 [0105.514] I> allocated(CO:38) base:0x84000000 size:0x400000 align: 0x400000 [0105.521] I> allocated(CO:37) base:0xf7fc0000 size:0x20000 align: 0x20000 [0105.528] I> allocated(CO:40) base:0x84800000 size:0xb00000 align: 0x800000 [0105.535] I> allocated(CO:41) base:0xf7f00000 size:0x80000 align: 0x80000 [0105.542] I> allocated(CO:28) base:0x84400000 size:0x400000 align: 0x400000 [0105.549] I> Boot-device: eMMC [0105.552] I> sdmmc bdev is already initialized [0105.557] W> MB1 PMIC CFG is version 1.2 [0105.560] W> Rail ID 7 is not found on MB1 BCT [0105.565] W> MB1 PMIC CFG is version 1.2 [0105.571] W> MB1 PMIC CFG is version 1.2 [0105.578] W> MB1 PMIC CFG is version 1.2 [0105.582] I> sdram slot : 1 [0105.585] I> Initializing SDRAM [0105.591] I> mss encrypt status check successful [0105.596] I> downloaded image bct_mb1 successfully [0105.871] I> Downloading blob at 0x0000000085300000 [0106.255] I> downloaded image blob successfully [0106.283] I> exiting nv3p server [0106.286] I> disabled_core_mask: 0xffffff0c [0106.290] I> Enabled Cores: 0xf3 [0106.293] I> TPC disable fuse status: 0 [0106.297] I> Booting Parker Sku [0106.300] I> Setup temp. GSC#29 (base:0x30000000, size:0x00010000) [0106.306] I> Loading preboot [0106.310] I> Binary(1) of size 59024 is loaded @ 0x40000000 [0106.316] I> Restrict GSC#29 access to DPMU only [0106.321] I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c [0106.325] I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c [0106.330] I> WP0 triggered [0106.333] I> Waypoint-0 ACK received :) [0106.336] I> WP0.5 triggered [0106.340] I> Initialized SCRs [0106.343] W> MB1 PMIC CFG is version 1.2 [0106.350] W> MB1 PMIC CFG is version 1.2 [0106.401] I> Waypoint-0.5 ACK received :) [0106.405] I> Setup temp. GSC#28 (base:0x84400000, size:0x00400000) [0106.411] I> Loading MTS-DMCE [0106.425] I> Binary(2) of size 266624 is loaded @ 0x84400000 [0106.430] I> disabled_core_mask: 0xffffff0c [0106.434] I> Loading MTS-PROPER [0106.437] I> Binary(3) of size 1809872 is loaded @ 0x0 [0106.442] I> Restrict GSC#28 access to DPMU only [0106.447] I> disabled_core_mask: 0xffffff0c [0106.451] I> WP1 triggered [0106.454] I> Loading MB2 [0106.457] I> Binary(8) of size 59696 is loaded @ 0x84000000 [0106.462] W> MB1 PMIC CFG is version 1.2 [0106.467] I> Configure DMCE carveout GSC#13 [0106.471] I> CPU reset vector: 0x96000000 [0106.475] I> MB2-params @ 0xf7f00000 [0106.479] I> Waypoint-1 ACK received :) [0106.483] I> Configure SC7 carveout GSC#23 [0106.487] I> MB1 recovery done [0106.493] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-597f2c10) [0106.502] I> Default Heap @ [0xd486400 - 0xd488400] [0106.506] I> DMA Heap @ [0x84900000 - 0x85300000] [0106.511] I> bit @ 0xd480000 [0106.514] I> BR-BCT relocated to 0xf7f20000 [0106.518] I> Boot-device: eMMC [0106.522] I> pmic: reset reason (nverc) : 0x80 [0106.527] I> Reading GPT from 512 for device 00000003 [0106.533] I> Reading GPT from 8388096 for device 00000003 [0106.540] I> Found 6 partitions in 00000003 device [0106.544] I> Reading GPT from 512 for device 00010003 [0106.551] I> Found 17 partitions in 00010003 device [0106.559] I> Binary(16) of size 524480 is loaded @ 0xf7600000 [0106.566] I> Binary(17) of size 326672 is loaded @ 0xf77b03e0 [0106.693] I> BPMP-FW load address = 0xf7600000 [0106.697] I> BPMP-FW DTB load address = 0x501b03e0 [0106.702] I> Copy BTCM section [0106.706] I> Binary(13) of size 143872 is loaded @ 0x96000000 [0106.711] I> MB2-params @ 0xf7f00000 [0106.715] I> CPUBL-params @ 0xf7f00000 [0106.719] I> CPU-BL loaded at : 0x96000000 [0106.723] I> Loading TOS ... [0106.726] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0106.732] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0106.739] I> Erasing Monitor @ 0x8490f600 [0106.743] I> Unhalting SCE [0106.747] I> Waypoint2-ACK: 0x5200b694 [0106.751] I> MB2(TBoot-BPMP) Recovery done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0107.113] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-e9641362) [0107.122] I> gpio framework initialized [0107.125] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0107.133] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0107.140] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0107.149] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0107.156] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0107.164] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0107.171] I> CPU: ARM Cortex A57 [0107.174] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100 [0107.179] I> L2 ECC enabled : yes [0107.182] I> CPU-BL Params @ 0xf7f00000 [0107.186] I> 0) Base:0x00000000 Size:0x00000000 [0107.190] I> 1) Base:0xf7e00000 Size:0x00100000 [0107.195] I> 2) Base:0xf7d00000 Size:0x00100000 [0107.199] I> 3) Base:0xf7c00000 Size:0x00100000 [0107.204] I> 4) Base:0xf7b00000 Size:0x00100000 [0107.208] I> 5) Base:0xf7a00000 Size:0x00100000 [0107.213] I> 6) Base:0xf7600000 Size:0x00200000 [0107.217] I> 7) Base:0xf7000000 Size:0x00400000 [0107.221] I> 8) Base:0xf7900000 Size:0x00100000 [0107.226] I> 9) Base:0xf7800000 Size:0x00100000 [0107.230] I> 10) Base:0xf6800000 Size:0x00800000 [0107.235] I> 11) Base:0x30000000 Size:0x00040000 [0107.239] I> 12) Base:0xf7500000 Size:0x00100000 [0107.244] I> 13) Base:0x30040000 Size:0x00001000 [0107.248] I> 14) Base:0x30048000 Size:0x00001000 [0107.252] I> 15) Base:0x30049000 Size:0x00001000 [0107.257] I> 16) Base:0x3004a000 Size:0x00001000 [0107.261] I> 17) Base:0x3004b000 Size:0x00001000 [0107.266] I> 18) Base:0x3004c000 Size:0x00001000 [0107.270] I> 19) Base:0x3004d000 Size:0x00001000 [0107.275] I> 20) Base:0x3004e000 Size:0x00001000 [0107.279] I> 21) Base:0x3004f000 Size:0x00001000 [0107.283] I> 22) Base:0x00000000 Size:0x00000000 [0107.288] I> 23) Base:0xf7ff0000 Size:0x00010000 [0107.292] I> 24) Base:0x00000000 Size:0x00000000 [0107.297] I> 25) Base:0x00000000 Size:0x00000000 [0107.301] I> 26) Base:0x00000000 Size:0x00000000 [0107.306] I> 27) Base:0x00000000 Size:0x00000000 [0107.310] I> 28) Base:0x84400000 Size:0x00400000 [0107.314] I> 29) Base:0x30000000 Size:0x00010000 [0107.319] I> 30) Base:0xf8000000 Size:0x08000000 [0107.323] I> 31) Base:0x00000000 Size:0x00000000 [0107.328] I> 32) Base:0xf6000000 Size:0x00600000 [0107.332] I> 33) Base:0x80000000 Size:0x76000000 [0107.337] I> 34) Base:0x100000000 Size:0x180000000 [0107.341] I> 35) Base:0x00000000 Size:0x00000000 [0107.346] I> 36) Base:0x00000000 Size:0x00000000 [0107.350] I> 37) Base:0xf7fc0000 Size:0x00020000 [0107.355] I> 38) Base:0x84000000 Size:0x00400000 [0107.359] I> 39) Base:0x96000000 Size:0x02000000 [0107.363] I> 40) Base:0x84800000 Size:0x00b00000 [0107.368] I> 41) Base:0xf7f00000 Size:0x00080000 [0107.372] I> 42) Base:0x00000000 Size:0x00000000 [0107.377] I> 43) Base:0x00000000 Size:0x00000000 [0107.381] I> Boot-device: eMMC [0107.406] I> sdmmc ddr50 mode [0107.409] I> sdmmc bdev is already initialized [0107.414] I> Reading GPT from 512 for device 00000003 [0107.419] I> Reading GPT from 8388096 for device 00000003 [0107.426] I> Found 6 partitions in 00000003 device [0107.430] I> Reading GPT from 512 for device 00010003 [0107.436] I> Found 17 partitions in 00010003 device [0107.441] I> Recovery boot_type: 0 [0107.444] I> Entering 3p server [0107.447] I> Entering into 3p server.. [0107.451] I> Transport interface is USB [0107.896] I> transport_usbf_priv_open USB configuration success [0111.329] I> Populate storage info [0111.345] I> Erasing device 0: 3 [0111.348] I> Erasing device 16384 blocks from block 0 [0111.369] I> Erase successful. [0111.373] I> Writing device 0: 3 [0111.376] I> Total write size is 16896 bytes [0111.420] I> Reading GPT from 512 for device 00000003 [0111.425] I> Reading GPT from 8388096 for device 00000003 [0111.432] I> Found 6 partitions in 00000003 device [0111.436] I> Write successful. [0111.440] I> Erasing device 1: 3 [0111.444] I> Erasing device 61071360 blocks from block 0 [0112.580] I> Erase successful. [0112.584] I> Writing device 1: 3 [0112.588] I> Total write size is 512 bytes [0112.593] I> Write successful. [0112.597] I> Writing device 1: 3 [0112.600] I> Total write size is 2688 bytes [0112.606] I> Reading GPT from 512 for device 00010003 [0112.612] I> Found 17 partitions in 00010003 device [0112.617] I> Write successful. [0112.621] I> Writing device 1: 3 [0112.624] I> Total write size is 16896 bytes [0112.630] I> Reading GPT from 512 for device 00010003 [0112.636] I> Found 17 partitions in 00010003 device [0112.640] I> Write successful. [0112.644] I> Writing mb1 partition [0112.647] I> Total write size is 88368 bytes [0112.675] I> Write successful. [0112.678] I> Writing spe-fw partition [0112.682] I> Total write size is 57184 bytes [0112.711] I> Write successful. [0112.715] I> Writing mb2 partition [0112.718] I> Total write size is 60720 bytes [0112.752] I> Write successful. [0112.756] I> Writing mts-preboot partition [0112.760] I> Total write size is 59824 bytes [0112.800] I> Write successful. [0112.804] I> Writing device 1: 3 [0112.807] I> Total write size is 512 bytes [0112.813] I> Write successful. [0112.816] I> Writing APP partition [0112.820] I> Total write size is 3359248524 bytes [0252.723] I> Write successful. [0252.727] I> Writing mts-bootpack partition [0252.731] I> Total write size is 2077344 bytes [0252.820] I> Write successful. [0252.824] I> Writing cpu-bootloader partition [0252.828] I> Total write size is 196176 bytes [0252.842] I> Write successful. [0252.846] I> Writing bootloader-dtb partition [0252.850] I> Total write size is 248432 bytes [0252.866] I> Write successful. [0252.870] I> Writing secure-os partition [0252.874] I> Total write size is 54784 bytes [0252.881] I> Write successful. [0252.885] I> Writing eks partition [0252.888] I> Total write size is 1488 bytes [0252.894] I> Write successful. [0252.898] I> Writing bpmp-fw partition [0252.902] I> Total write size is 524880 bytes [0252.930] I> Write successful. [0252.934] I> Writing bpmp-fw-dtb partition [0252.937] I> Total write size is 327072 bytes [0252.960] I> Write successful. [0252.963] I> Writing sce-fw partition [0252.967] I> Total write size is 65488 bytes [0252.976] I> Write successful. [0252.980] I> Writing sc7 partition [0252.983] I> Total write size is 20848 bytes [0252.991] I> Write successful. [0252.995] I> Writing kernel partition [0252.998] I> Total write size is 6717440 bytes [0253.299] I> Write successful. [0253.303] I> Writing kernel-dtb partition [0253.307] I> Total write size is 248032 bytes [0253.325] I> Write successful. [0253.335] I> Writing BCT partition [0253.338] I> Total write size is 3584 bytes [0253.379] I> Write successful. [0253.396] I> Writing MB1_BCT partition [0253.400] I> Total write size is 49968 bytes [0253.440] I> Write successful. [0253.451] I> Rebooting : reset-coldboot [0000.201] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291) [0000.209] I> Default Heap @ [0xd486400 - 0xd488400] [0000.214] I> DMA Heap @ [0x84900000 - 0x85300000] [0000.219] I> bit @ 0xd480000 [0000.222] I> BR-BCT relocated to 0xf7f20000 [0000.226] I> Boot-device: eMMC [0000.230] I> pmic: reset reason (nverc) : 0x0 [0000.234] I> Reading GPT from 512 for device 00000003 [0000.240] I> Reading GPT from 8388096 for device 00000003 [0000.247] I> Found 6 partitions in 00000003 device [0000.252] I> Reading GPT from 512 for device 00010003 [0000.258] I> Found 17 partitions in 00010003 device [0000.264] W> No valid slot number is found in scratch register [0000.269] W> Return default slot: _a [0000.273] I> A/B: bin_type (16) slot 0 [0000.276] I> Select partition: bpmp-fw [0000.280] I> Loading partition bpmp-fw at 0xf7600000 [0000.285] I> Reading two headers - addr:0xf7600000 blocks:1 [0000.290] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1 [0000.305] I> Binary(16) of size 524480 is loaded @ 0xf7600000 [0000.311] W> No valid slot number is found in scratch register [0000.316] W> Return default slot: _a [0000.320] I> A/B: bin_type (17) slot 0 [0000.323] I> Select partition: bpmp-fw-dtb [0000.327] I> Loading partition bpmp-fw-dtb at 0xf77f0000 [0000.332] I> Reading two headers - addr:0xf77f0000 blocks:1 [0000.338] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1 [0000.350] I> Binary(17) of size 326672 is loaded @ 0xf77b0200 [0000.477] I> BPMP-FW load address = 0xf7600000 [0000.481] I> BPMP-FW DTB load address = 0x501b0200 [0000.486] I> Loading SCE-FW ... [0000.489] W> No valid slot number is found in scratch register [0000.494] W> Return default slot: _a [0000.498] I> A/B: bin_type (12) slot 0 [0000.501] I> Select partition: sce-fw [0000.505] I> Loading partition sce-fw at 0xf7800000 [0000.510] I> Reading two headers - addr:0xf7800000 blocks:1 [0000.515] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1 [0000.524] I> Binary(12) of size 65088 is loaded @ 0xf7800000 [0000.529] I> Init SCE [0000.531] I> Copy BTCM section [0000.534] W> No valid slot number is found in scratch register [0000.540] W> Return default slot: _a [0000.543] I> A/B: bin_type (13) slot 0 [0000.547] I> Select partition: cpu-bootloader [0000.551] I> Loading partition cpu-bootloader at 0x96000000 [0000.557] I> Reading two headers - addr:0x96000000 blocks:1 [0000.562] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1 [0000.572] I> Binary(13) of size 195776 is loaded @ 0x96000000 [0000.578] W> No valid slot number is found in scratch register [0000.584] W> Return default slot: _a [0000.587] I> A/B: bin_type (20) slot 0 [0000.591] I> Select partition: bootloader-dtb [0000.595] I> Loading partition bootloader-dtb at 0x85300000 [0000.600] I> Reading two headers - addr:0x85300000 blocks:1 [0000.606] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1 [0000.617] I> Binary(20) of size 248032 is loaded @ 0x85300000 [0000.622] I> MB2-params @ 0xf7f00000 [0000.626] I> CPUBL-params @ 0xf7f00000 [0000.629] I> CPU-BL loaded at : 0x96000000 [0000.633] I> Loading TOS ... [0000.636] W> No valid slot number is found in scratch register [0000.642] W> Return default slot: _a [0000.645] I> A/B: bin_type (14) slot 0 [0000.649] I> Select partition: secure-os [0000.653] I> Loading partition secure-os at 0x8490f400 [0000.658] I> Reading two headers - addr:0x8490f400 blocks:1 [0000.663] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1 [0000.671] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0000.677] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0000.684] I> Erasing Monitor @ 0x8490f600 [0000.689] I> Unhalting SCE [0000.692] I> Waypoint2-ACK: 0x5200b8d0 [0000.696] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 21:06:35, Mar 1 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.058] I> Welcome to Cboot [0001.061] I> Cboot Version: 00.00.2014.50-t186-fabbc56c [0001.066] I> CPU-BL Params @ 0xf7f00000 [0001.069] I> 0) Base:0x00000000 Size:0x00000000 [0001.074] I> 1) Base:0xf7e00000 Size:0x00100000 [0001.078] I> 2) Base:0xf7d00000 Size:0x00100000 [0001.083] I> 3) Base:0xf7c00000 Size:0x00100000 [0001.087] I> 4) Base:0xf7b00000 Size:0x00100000 [0001.091] I> 5) Base:0xf7a00000 Size:0x00100000 [0001.096] I> 6) Base:0xf7600000 Size:0x00200000 [0001.100] I> 7) Base:0xf7000000 Size:0x00400000 [0001.105] I> 8) Base:0xf7900000 Size:0x00100000 [0001.109] I> 9) Base:0xf7800000 Size:0x00100000 [0001.114] I> 10) Base:0xf6800000 Size:0x00800000 [0001.118] I> 11) Base:0x30000000 Size:0x00040000 [0001.122] I> 12) Base:0xf7500000 Size:0x00100000 [0001.127] I> 13) Base:0x30040000 Size:0x00001000 [0001.131] I> 14) Base:0x30048000 Size:0x00001000 [0001.136] I> 15) Base:0x30049000 Size:0x00001000 [0001.140] I> 16) Base:0x3004a000 Size:0x00001000 [0001.145] I> 17) Base:0x3004b000 Size:0x00001000 [0001.149] I> 18) Base:0x3004c000 Size:0x00001000 [0001.153] I> 19) Base:0x3004d000 Size:0x00001000 [0001.158] I> 20) Base:0x3004e000 Size:0x00001000 [0001.162] I> 21) Base:0x3004f000 Size:0x00001000 [0001.167] I> 22) Base:0x00000000 Size:0x00000000 [0001.171] I> 23) Base:0xf7ff0000 Size:0x00010000 [0001.176] I> 24) Base:0x00000000 Size:0x00000000 [0001.180] I> 25) Base:0x00000000 Size:0x00000000 [0001.184] I> 26) Base:0x00000000 Size:0x00000000 [0001.189] I> 27) Base:0x00000000 Size:0x00000000 [0001.193] I> 28) Base:0x84400000 Size:0x00400000 [0001.198] I> 29) Base:0x30000000 Size:0x00010000 [0001.202] I> 30) Base:0xf8000000 Size:0x08000000 [0001.207] I> 31) Base:0x00000000 Size:0x00000000 [0001.211] I> 32) Base:0xf6000000 Size:0x00600000 [0001.215] I> 33) Base:0x80000000 Size:0x76000000 [0001.220] I> 34) Base:0x100000000 Size:0x180000000 [0001.224] I> 35) Base:0x00000000 Size:0x00000000 [0001.229] I> 36) Base:0x00000000 Size:0x00000000 [0001.233] I> 37) Base:0xf7fc0000 Size:0x00020000 [0001.238] I> 38) Base:0x84000000 Size:0x00400000 [0001.242] I> 39) Base:0x96000000 Size:0x02000000 [0001.247] I> 40) Base:0x84800000 Size:0x00b00000 [0001.251] I> 41) Base:0xf7f00000 Size:0x00080000 [0001.255] I> 42) Base:0x00000000 Size:0x00000000 [0001.260] I> 43) Base:0x00000000 Size:0x00000000 [0001.264] platform_init_interrupts-121, 1* [0001.269] Interrupts Init done [0001.272] calling constructors [0001.275] initializing heap [0001.278] initializing threads [0001.281] initializing timers [0001.284] creating bootstrap completion thread [0001.288] top of bootstrap2() [0001.291] CPU: ARM Cortex A57 [0001.295] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.300] initializing platform [0001.303] I> Boot-device: eMMC [0001.306] I> odm data is 1090000 [0001.309] I> Reading GPT from 512 for device 00000003 [0001.315] I> Reading GPT from 8388096 for device 00000003 [0001.322] I> Found 6 partitions in 00000003 device [0001.326] I> Reading GPT from 512 for device 00010003 [0001.332] I> Found 17 partitions in 00010003 device [0001.337] W> No valid slot number is found in scratch register [0001.343] W> Return default slot: _a [0001.346] I> A/B: bin_type (1) slot 0 [0001.349] I> Select partition: kernel-dtb [0001.353] I> Loading partition kernel-dtb at 0x92000000 [0001.362] I> Kernel_dtb @0x92000000 [0001.365] I> Bl_dtb @0x85300000 [0001.368] I> gpio framework initialized [0001.372] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.379] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.387] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.395] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.403] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.411] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.419] E> tegrabl_blob_init: BMP partition does not have valid Blob [0001.425] E> tegrabl_load_bmp_blob: BMP blob initialization failed [0001.431] W> Loading bmp blob to memory failed [0001.439] I> Find /i2c@c250000's alias i2c7 [0001.443] I> Reading eeprom i2c=7 address=0x50 [0001.473] I> Device at /i2c@c250000:0x50 [0001.476] I> Reading eeprom i2c=7 address=0x57 [0001.505] I> Device at /i2c@c250000:0x57 [0001.510] I> Find /i2c@c240000's alias i2c1 [0001.514] I> Reading eeprom i2c=1 address=0x51 [0001.520] I> Eeprom read failed 0x1a800027 [0001.524] I> Find /i2c@3160000's alias i2c0 [0001.528] I> Reading eeprom i2c=0 address=0x50 [0001.534] I> Eeprom read failed 0x1a800027 [0001.538] I> Find /i2c@3180000's alias i2c2 [0001.542] I> Reading eeprom i2c=2 address=0x54 [0001.547] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.577] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.583] I> Device at /i2c@3180000:0x54 [0001.586] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.591] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.602] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.607] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.618] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.623] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.634] initializing target [0001.637] calling apps_init() [0001.641] starting app android_boot_app [0001.645] I> Gpio keyboard init success [0001.648] I> Kernel type = Normal [0001.651] I> Loading kernel/boot.img ... [0001.655] W> No valid slot number is found in scratch register [0001.661] W> Return default slot: _a [0001.664] I> A/B: bin_type (0) slot 0 [0001.668] I> Select partition: kernel [0001.671] I> Loading partition kernel at 0xa8000000 [0001.752] W> No valid slot number is found in scratch register [0001.758] W> Return default slot: _a [0001.761] I> A/B: bin_type (1) slot 0 [0001.765] I> Select partition: kernel-dtb [0001.769] I> Loading partition kernel-dtb at 0x92000000 [0001.777] I> Kernel DTB @ 0x92000000 [0001.781] I> Verified boot state = Orange [0001.785] E> tegrabl_display_clear: display is not initialized [0001.790] I> Checking boot.img header magic ... [0001.794] I> [OK] [0001.796] I> Valid boot.img @ 0xa8000000 [0001.800] I> decompressor handler not found [0001.804] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.811] I> Done [0001.813] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000 [0001.823] I> Updated bpmp info to DTB [0001.828] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb [0001.833] I> Updated initrd info to DTB [0001.837] I> disabled_core_mask: 0xffffff0c [0001.841] I> Kernel type = Normal [0001.844] I> add_serialno: Serial Num = 0320817136116 [0001.849] W> No valid slot number is found in scratch register [0001.854] W> Return default slot: _a [0001.858] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0 [0001.897] I> Updated bootarg info to DTB [0001.902] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0 [0001.908] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1 [0001.914] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2 [0001.920] E> "ids" doesn't exist, creating [0001.924] E> "connection" doesn't exist, creating [0001.929] E> "configs" doesn't exist, creating [0001.933] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.939] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.949] I> create_pm_ids: id: 2597-0000-501-B, len: 15 [0001.955] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.966] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.971] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.982] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50 [0001.989] E> "i2c@c250000" doesn't exist, creating [0001.993] E> "module@0x50" doesn't exist, creating [0001.998] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57 [0002.005] E> "module@0x57" doesn't exist, creating [0002.010] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54 [0002.017] E> "i2c@3180000" doesn't exist, creating [0002.022] E> "module@0x54" doesn't exist, creating [0002.029] I> Adding plugin-manager/ids/3310-1000-B00-E [0002.035] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.041] I> Adding plugin-manager/configs/3310-power-config 00 [0002.047] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.052] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.058] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.064] I> Adding plugin-manager/configs/3310-display-config 00 [0002.070] E> "chip-id" doesn't exist, creating [0002.074] I> Adding plugin-manager/chip-id/A02P [0002.081] I> Updated memory info to DTB [0002.086] E> "reset" doesn't exist, creating [0002.091] E> "pmc-reset-reason" doesn't exist, creating [0002.096] E> "pmic-reset-reason" doesn't exist, creating [0002.101] I> disabled_core_mask: 0xffffff0c [0002.112] I> tegrabl_load_kernel_and_dtb: Done U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... starting USB... No controllers found USB is stopped. Please issue 'usb start' first. starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ERROR: phy_startup() failed: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start() ERROR: FAILED: -110 at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start() missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 ethernet@2490000 Waiting for PHY auto negotiation to complete...... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 ethernet@2490000 Waiting for PHY auto negotiation to complete....... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-tegra186 ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default ethernet@2490000 Waiting for PHY auto negotiation to complete.... done *** ERROR: `serverip' not set Config file not found starting USB... No controllers found ethernet@2490000 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.208 (638 ms) Using ethernet@2490000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.208 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: T T T T T T T T T T Retry count exceeded; starting again ethernet@2490000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.208 (5665 ms) Using ethernet@2490000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.208 Filename 'boot.scr.uimg'. Load address: 0x80080000 Loading: T T T T T T bad length 6 < 28 T T T T Retry count exceeded; starting again Tegra186 (P2771-0000-500) #
so this is the output in the serial console (!) when flashing. I am using the procedure you recommended. The command is sudo -s ./flash.sh -S 28GiB jetson-tx2 mmcblk0p1

Welcome to minicom 2.7

OPTIONS: I18n
Compiled on Feb 7 2016, 13:37:27.
Port /dev/ttyUSB0, 20:00:39

Press CTRL-A Z for help on special keys

[0049.888] I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
[0049.896] I> rst_source : 0x0
[0049.899] I> rst_level : 0x0
[0049.902] I> Boot-device: eMMC
[0049.925] I> sdmmc ddr50 mode
[0049.929] I> Entering into 3p server..
[0049.932] I> Transport interface is USB
[0050.377] I> transport_usbf_priv_open USB configuration success
[0055.915] I> Populate eeprom info for module cvm
[0105.242] I> bit @ 0xd480000
[0105.245] I> Downloading bct_bootrom at 0x000000004004e800
[0105.252] I> downloaded image bct_bootrom successfully
[0105.258] I> Downloading bct_mb1 at 0x0000000040041000
[0105.268] I> MB1-BCT relocated to 0xd48bc00 from 0x40041000
[0105.274] I> Supported mb1-bct versions 9-12
[0105.278] I> Version of mb1 bct binary 12
[0105.282] W> MB1 BCT does not have controller prod config data
[0105.287] I> Bootrom patch version : 31 (correctly patched)
[0105.293] I> ATE fuse revision : 0x30880
[0105.297] I> chip revision : A02P
[0105.300] I> disabled_core_mask: 0xffffff0c
[0105.304] I> Enabled Cores: 0xf3
[0105.307] I> TPC disable fuse status: 0
[0105.311] I> Booting Parker Sku
[0105.314] I> Ram repair fuse : 0x0
[0105.317] I> allocated(CO:30) base:0xf8000000 size:0x8000000 align: 0x8000000
[0105.324] I> allocated(CO:23) base:0xf7ff0000 size:0x10000 align: 0x10000
[0105.331] I> allocated(CO:31) base:0x0 size:0x0 align: 0x0
[0105.336] I> allocated(CO:1) base:0xf7e00000 size:0x100000 align: 0x100000
[0105.343] I> allocated(CO:2) base:0xf7d00000 size:0x100000 align: 0x100000
[0105.350] I> allocated(CO:3) base:0xf7c00000 size:0x100000 align: 0x100000
[0105.357] I> allocated(CO:4) base:0xf7b00000 size:0x100000 align: 0x100000
[0105.363] I> allocated(CO:5) base:0xf7a00000 size:0x100000 align: 0x100000
[0105.370] I> allocated(CO:8) base:0xf7900000 size:0x100000 align: 0x100000
[0105.377] I> allocated(CO:27) base:0x0 size:0x0 align: 0x0
[0105.382] I> allocated(CO:6) base:0xf7600000 size:0x200000 align: 0x200000
[0105.389] I> allocated(CO:7) base:0xf7000000 size:0x400000 align: 0x400000
[0105.396] I> allocated(CO:9) base:0xf7800000 size:0x100000 align: 0x100000
[0105.403] I> allocated(CO:10) base:0xf6800000 size:0x800000 align: 0x800000
[0105.410] I> allocated(CO:11) base:0x30000000 size:0x40000 align: 0x0
[0105.416] I> allocated(CO:12) base:0xf7500000 size:0x100000 align: 0x100000
[0105.423] I> allocated(CO:13) base:0x30040000 size:0x1000 align: 0x0
[0105.429] I> allocated(CO:14) base:0x30048000 size:0x1000 align: 0x0
[0105.435] I> allocated(CO:15) base:0x30049000 size:0x1000 align: 0x0
[0105.442] I> allocated(CO:16) base:0x3004a000 size:0x1000 align: 0x0
[0105.448] I> allocated(CO:17) base:0x3004b000 size:0x1000 align: 0x0
[0105.454] I> allocated(CO:19) base:0x3004d000 size:0x1000 align: 0x0
[0105.460] I> allocated(CO:18) base:0x3004c000 size:0x1000 align: 0x0
[0105.467] I> allocated(CO:20) base:0x3004e000 size:0x1000 align: 0x0
[0105.473] I> allocated(CO:21) base:0x3004f000 size:0x1000 align: 0x0
[0105.479] I> allocated(CO:22) base:0x0 size:0x0 align: 0x0
[0105.484] I> allocated(CO:32) base:0xf6000000 size:0x600000 align: 0x400000
[0105.491] I> allocated(CO:24) base:0x0 size:0x0 align: 0x0
[0105.497] I> allocated(CO:25) base:0x0 size:0x0 align: 0x0
[0105.502] I> allocated(CO:26) base:0x0 size:0x0 align: 0x0
[0105.507] I> allocated(CO:39) base:0x96000000 size:0x2000000 align: 0x2000000
[0105.514] I> allocated(CO:38) base:0x84000000 size:0x400000 align: 0x400000
[0105.521] I> allocated(CO:37) base:0xf7fc0000 size:0x20000 align: 0x20000
[0105.528] I> allocated(CO:40) base:0x84800000 size:0xb00000 align: 0x800000
[0105.535] I> allocated(CO:41) base:0xf7f00000 size:0x80000 align: 0x80000
[0105.542] I> allocated(CO:28) base:0x84400000 size:0x400000 align: 0x400000
[0105.549] I> Boot-device: eMMC
[0105.552] I> sdmmc bdev is already initialized
[0105.557] W> MB1 PMIC CFG is version 1.2
[0105.560] W> Rail ID 7 is not found on MB1 BCT
[0105.565] W> MB1 PMIC CFG is version 1.2
[0105.571] W> MB1 PMIC CFG is version 1.2
[0105.578] W> MB1 PMIC CFG is version 1.2
[0105.582] I> sdram slot : 1
[0105.585] I> Initializing SDRAM
[0105.591] I> mss encrypt status check successful
[0105.596] I> downloaded image bct_mb1 successfully
[0105.871] I> Downloading blob at 0x0000000085300000
[0106.255] I> downloaded image blob successfully
[0106.283] I> exiting nv3p server
[0106.286] I> disabled_core_mask: 0xffffff0c
[0106.290] I> Enabled Cores: 0xf3
[0106.293] I> TPC disable fuse status: 0
[0106.297] I> Booting Parker Sku
[0106.300] I> Setup temp. GSC#29 (base:0x30000000, size:0x00010000)
[0106.306] I> Loading preboot
[0106.310] I> Binary(1) of size 59024 is loaded @ 0x40000000
[0106.316] I> Restrict GSC#29 access to DPMU only
[0106.321] I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
[0106.325] I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
[0106.330] I> WP0 triggered
[0106.333] I> Waypoint-0 ACK received :)
[0106.336] I> WP0.5 triggered
[0106.340] I> Initialized SCRs
[0106.343] W> MB1 PMIC CFG is version 1.2
[0106.350] W> MB1 PMIC CFG is version 1.2
[0106.401] I> Waypoint-0.5 ACK received :)
[0106.405] I> Setup temp. GSC#28 (base:0x84400000, size:0x00400000)
[0106.411] I> Loading MTS-DMCE
[0106.425] I> Binary(2) of size 266624 is loaded @ 0x84400000
[0106.430] I> disabled_core_mask: 0xffffff0c
[0106.434] I> Loading MTS-PROPER
[0106.437] I> Binary(3) of size 1809872 is loaded @ 0x0
[0106.442] I> Restrict GSC#28 access to DPMU only
[0106.447] I> disabled_core_mask: 0xffffff0c
[0106.451] I> WP1 triggered
[0106.454] I> Loading MB2
[0106.457] I> Binary(8) of size 59696 is loaded @ 0x84000000
[0106.462] W> MB1 PMIC CFG is version 1.2
[0106.467] I> Configure DMCE carveout GSC#13
[0106.471] I> CPU reset vector: 0x96000000
[0106.475] I> MB2-params @ 0xf7f00000
[0106.479] I> Waypoint-1 ACK received :)
[0106.483] I> Configure SC7 carveout GSC#23
[0106.487] I> MB1 recovery done

[0106.493] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-597f2c10)
[0106.502] I> Default Heap @ [0xd486400 - 0xd488400]
[0106.506] I> DMA Heap @ [0x84900000 - 0x85300000]
[0106.511] I> bit @ 0xd480000
[0106.514] I> BR-BCT relocated to 0xf7f20000
[0106.518] I> Boot-device: eMMC
[0106.522] I> pmic: reset reason (nverc) : 0x80
[0106.527] I> Reading GPT from 512 for device 00000003
[0106.533] I> Reading GPT from 8388096 for device 00000003
[0106.540] I> Found 6 partitions in 00000003 device
[0106.544] I> Reading GPT from 512 for device 00010003
[0106.551] I> Found 17 partitions in 00010003 device
[0106.559] I> Binary(16) of size 524480 is loaded @ 0xf7600000
[0106.566] I> Binary(17) of size 326672 is loaded @ 0xf77b03e0
[0106.693] I> BPMP-FW load address = 0xf7600000
[0106.697] I> BPMP-FW DTB load address = 0x501b03e0
[0106.702] I> Copy BTCM section
[0106.706] I> Binary(13) of size 143872 is loaded @ 0x96000000
[0106.711] I> MB2-params @ 0xf7f00000
[0106.715] I> CPUBL-params @ 0xf7f00000
[0106.719] I> CPU-BL loaded at : 0x96000000
[0106.723] I> Loading TOS ...
[0106.726] I> Binary(14) of size 54384 is loaded @ 0x8490f400
[0106.732] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
[0106.739] I> Erasing Monitor @ 0x8490f600
[0106.743] I> Unhalting SCE
[0106.747] I> Waypoint2-ACK: 0x5200b694
[0106.751] I> MB2(TBoot-BPMP) Recovery done

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[0107.113] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-e9641362)
[0107.122] I> gpio framework initialized
[0107.125] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0107.133] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0107.140] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0107.149] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0107.156] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0107.164] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0107.171] I> CPU: ARM Cortex A57
[0107.174] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100
[0107.179] I> L2 ECC enabled : yes
[0107.182] I> CPU-BL Params @ 0xf7f00000
[0107.186] I> 0) Base:0x00000000 Size:0x00000000
[0107.190] I> 1) Base:0xf7e00000 Size:0x00100000
[0107.195] I> 2) Base:0xf7d00000 Size:0x00100000
[0107.199] I> 3) Base:0xf7c00000 Size:0x00100000
[0107.204] I> 4) Base:0xf7b00000 Size:0x00100000
[0107.208] I> 5) Base:0xf7a00000 Size:0x00100000
[0107.213] I> 6) Base:0xf7600000 Size:0x00200000
[0107.217] I> 7) Base:0xf7000000 Size:0x00400000
[0107.221] I> 8) Base:0xf7900000 Size:0x00100000
[0107.226] I> 9) Base:0xf7800000 Size:0x00100000
[0107.230] I> 10) Base:0xf6800000 Size:0x00800000
[0107.235] I> 11) Base:0x30000000 Size:0x00040000
[0107.239] I> 12) Base:0xf7500000 Size:0x00100000
[0107.244] I> 13) Base:0x30040000 Size:0x00001000
[0107.248] I> 14) Base:0x30048000 Size:0x00001000
[0107.252] I> 15) Base:0x30049000 Size:0x00001000
[0107.257] I> 16) Base:0x3004a000 Size:0x00001000
[0107.261] I> 17) Base:0x3004b000 Size:0x00001000
[0107.266] I> 18) Base:0x3004c000 Size:0x00001000
[0107.270] I> 19) Base:0x3004d000 Size:0x00001000
[0107.275] I> 20) Base:0x3004e000 Size:0x00001000
[0107.279] I> 21) Base:0x3004f000 Size:0x00001000
[0107.283] I> 22) Base:0x00000000 Size:0x00000000
[0107.288] I> 23) Base:0xf7ff0000 Size:0x00010000
[0107.292] I> 24) Base:0x00000000 Size:0x00000000
[0107.297] I> 25) Base:0x00000000 Size:0x00000000
[0107.301] I> 26) Base:0x00000000 Size:0x00000000
[0107.306] I> 27) Base:0x00000000 Size:0x00000000
[0107.310] I> 28) Base:0x84400000 Size:0x00400000
[0107.314] I> 29) Base:0x30000000 Size:0x00010000
[0107.319] I> 30) Base:0xf8000000 Size:0x08000000
[0107.323] I> 31) Base:0x00000000 Size:0x00000000
[0107.328] I> 32) Base:0xf6000000 Size:0x00600000
[0107.332] I> 33) Base:0x80000000 Size:0x76000000
[0107.337] I> 34) Base:0x100000000 Size:0x180000000
[0107.341] I> 35) Base:0x00000000 Size:0x00000000
[0107.346] I> 36) Base:0x00000000 Size:0x00000000
[0107.350] I> 37) Base:0xf7fc0000 Size:0x00020000
[0107.355] I> 38) Base:0x84000000 Size:0x00400000
[0107.359] I> 39) Base:0x96000000 Size:0x02000000
[0107.363] I> 40) Base:0x84800000 Size:0x00b00000
[0107.368] I> 41) Base:0xf7f00000 Size:0x00080000
[0107.372] I> 42) Base:0x00000000 Size:0x00000000
[0107.377] I> 43) Base:0x00000000 Size:0x00000000
[0107.381] I> Boot-device: eMMC
[0107.406] I> sdmmc ddr50 mode
[0107.409] I> sdmmc bdev is already initialized
[0107.414] I> Reading GPT from 512 for device 00000003
[0107.419] I> Reading GPT from 8388096 for device 00000003
[0107.426] I> Found 6 partitions in 00000003 device
[0107.430] I> Reading GPT from 512 for device 00010003
[0107.436] I> Found 17 partitions in 00010003 device
[0107.441] I> Recovery boot_type: 0
[0107.444] I> Entering 3p server
[0107.447] I> Entering into 3p server..
[0107.451] I> Transport interface is USB
[0107.896] I> transport_usbf_priv_open USB configuration success
[0111.329] I> Populate storage info
[0111.345] I> Erasing device 0: 3
[0111.348] I> Erasing device 16384 blocks from block 0
[0111.369] I> Erase successful.
[0111.373] I> Writing device 0: 3
[0111.376] I> Total write size is 16896 bytes
[0111.420] I> Reading GPT from 512 for device 00000003
[0111.425] I> Reading GPT from 8388096 for device 00000003
[0111.432] I> Found 6 partitions in 00000003 device
[0111.436] I> Write successful.
[0111.440] I> Erasing device 1: 3
[0111.444] I> Erasing device 61071360 blocks from block 0
[0112.580] I> Erase successful.
[0112.584] I> Writing device 1: 3
[0112.588] I> Total write size is 512 bytes
[0112.593] I> Write successful.
[0112.597] I> Writing device 1: 3
[0112.600] I> Total write size is 2688 bytes
[0112.606] I> Reading GPT from 512 for device 00010003
[0112.612] I> Found 17 partitions in 00010003 device
[0112.617] I> Write successful.
[0112.621] I> Writing device 1: 3
[0112.624] I> Total write size is 16896 bytes
[0112.630] I> Reading GPT from 512 for device 00010003
[0112.636] I> Found 17 partitions in 00010003 device
[0112.640] I> Write successful.
[0112.644] I> Writing mb1 partition
[0112.647] I> Total write size is 88368 bytes
[0112.675] I> Write successful.
[0112.678] I> Writing spe-fw partition
[0112.682] I> Total write size is 57184 bytes
[0112.711] I> Write successful.
[0112.715] I> Writing mb2 partition
[0112.718] I> Total write size is 60720 bytes
[0112.752] I> Write successful.
[0112.756] I> Writing mts-preboot partition
[0112.760] I> Total write size is 59824 bytes
[0112.800] I> Write successful.
[0112.804] I> Writing device 1: 3
[0112.807] I> Total write size is 512 bytes
[0112.813] I> Write successful.
[0112.816] I> Writing APP partition
[0112.820] I> Total write size is 3359248524 bytes
[0252.723] I> Write successful.
[0252.727] I> Writing mts-bootpack partition
[0252.731] I> Total write size is 2077344 bytes
[0252.820] I> Write successful.
[0252.824] I> Writing cpu-bootloader partition
[0252.828] I> Total write size is 196176 bytes
[0252.842] I> Write successful.
[0252.846] I> Writing bootloader-dtb partition
[0252.850] I> Total write size is 248432 bytes
[0252.866] I> Write successful.
[0252.870] I> Writing secure-os partition
[0252.874] I> Total write size is 54784 bytes
[0252.881] I> Write successful.
[0252.885] I> Writing eks partition
[0252.888] I> Total write size is 1488 bytes
[0252.894] I> Write successful.
[0252.898] I> Writing bpmp-fw partition
[0252.902] I> Total write size is 524880 bytes
[0252.930] I> Write successful.
[0252.934] I> Writing bpmp-fw-dtb partition
[0252.937] I> Total write size is 327072 bytes
[0252.960] I> Write successful.
[0252.963] I> Writing sce-fw partition
[0252.967] I> Total write size is 65488 bytes
[0252.976] I> Write successful.
[0252.980] I> Writing sc7 partition
[0252.983] I> Total write size is 20848 bytes
[0252.991] I> Write successful.
[0252.995] I> Writing kernel partition
[0252.998] I> Total write size is 6717440 bytes
[0253.299] I> Write successful.
[0253.303] I> Writing kernel-dtb partition
[0253.307] I> Total write size is 248032 bytes
[0253.325] I> Write successful.
[0253.335] I> Writing BCT partition
[0253.338] I> Total write size is 3584 bytes
[0253.379] I> Write successful.
[0253.396] I> Writing MB1_BCT partition
[0253.400] I> Total write size is 49968 bytes
[0253.440] I> Write successful.
[0253.451] I> Rebooting : reset-coldboot


[0000.201] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
[0000.209] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.214] I> DMA Heap @ [0x84900000 - 0x85300000]
[0000.219] I> bit @ 0xd480000
[0000.222] I> BR-BCT relocated to 0xf7f20000
[0000.226] I> Boot-device: eMMC
[0000.230] I> pmic: reset reason (nverc) : 0x0
[0000.234] I> Reading GPT from 512 for device 00000003
[0000.240] I> Reading GPT from 8388096 for device 00000003
[0000.247] I> Found 6 partitions in 00000003 device
[0000.252] I> Reading GPT from 512 for device 00010003
[0000.258] I> Found 17 partitions in 00010003 device
[0000.264] W> No valid slot number is found in scratch register
[0000.269] W> Return default slot: _a
[0000.273] I> A/B: bin_type (16) slot 0
[0000.276] I> Select partition: bpmp-fw
[0000.280] I> Loading partition bpmp-fw at 0xf7600000
[0000.285] I> Reading two headers - addr:0xf7600000 blocks:1
[0000.290] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
[0000.305] I> Binary(16) of size 524480 is loaded @ 0xf7600000
[0000.311] W> No valid slot number is found in scratch register
[0000.316] W> Return default slot: _a
[0000.320] I> A/B: bin_type (17) slot 0
[0000.323] I> Select partition: bpmp-fw-dtb
[0000.327] I> Loading partition bpmp-fw-dtb at 0xf77f0000
[0000.332] I> Reading two headers - addr:0xf77f0000 blocks:1
[0000.338] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
[0000.350] I> Binary(17) of size 326672 is loaded @ 0xf77b0200
[0000.477] I> BPMP-FW load address = 0xf7600000
[0000.481] I> BPMP-FW DTB load address = 0x501b0200
[0000.486] I> Loading SCE-FW ...
[0000.489] W> No valid slot number is found in scratch register
[0000.494] W> Return default slot: _a
[0000.498] I> A/B: bin_type (12) slot 0
[0000.501] I> Select partition: sce-fw
[0000.505] I> Loading partition sce-fw at 0xf7800000
[0000.510] I> Reading two headers - addr:0xf7800000 blocks:1
[0000.515] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
[0000.524] I> Binary(12) of size 65088 is loaded @ 0xf7800000
[0000.529] I> Init SCE
[0000.531] I> Copy BTCM section
[0000.534] W> No valid slot number is found in scratch register
[0000.540] W> Return default slot: _a
[0000.543] I> A/B: bin_type (13) slot 0
[0000.547] I> Select partition: cpu-bootloader
[0000.551] I> Loading partition cpu-bootloader at 0x96000000
[0000.557] I> Reading two headers - addr:0x96000000 blocks:1
[0000.562] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
[0000.572] I> Binary(13) of size 195776 is loaded @ 0x96000000
[0000.578] W> No valid slot number is found in scratch register
[0000.584] W> Return default slot: _a
[0000.587] I> A/B: bin_type (20) slot 0
[0000.591] I> Select partition: bootloader-dtb
[0000.595] I> Loading partition bootloader-dtb at 0x85300000
[0000.600] I> Reading two headers - addr:0x85300000 blocks:1
[0000.606] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
[0000.617] I> Binary(20) of size 248032 is loaded @ 0x85300000
[0000.622] I> MB2-params @ 0xf7f00000
[0000.626] I> CPUBL-params @ 0xf7f00000
[0000.629] I> CPU-BL loaded at : 0x96000000
[0000.633] I> Loading TOS ...
[0000.636] W> No valid slot number is found in scratch register
[0000.642] W> Return default slot: _a
[0000.645] I> A/B: bin_type (14) slot 0
[0000.649] I> Select partition: secure-os
[0000.653] I> Loading partition secure-os at 0x8490f400
[0000.658] I> Reading two headers - addr:0x8490f400 blocks:1
[0000.663] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
[0000.671] I> Binary(14) of size 54384 is loaded @ 0x8490f400
[0000.677] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
[0000.684] I> Erasing Monitor @ 0x8490f600
[0000.689] I> Unhalting SCE
[0000.692] I> Waypoint2-ACK: 0x5200b8d0
[0000.696] I> MB2(TBoot-BPMP) done

NOTICE: BL31: v1.2(release):ff7a644
NOTICE: BL31: Built : 21:06:35, Mar 1 2017
NOTICE: Trusty image missing.
ERROR: Error initializing runtime service trusty_fast
[0001.058] I> Welcome to Cboot
[0001.061] I> Cboot Version: 00.00.2014.50-t186-fabbc56c
[0001.066] I> CPU-BL Params @ 0xf7f00000
[0001.069] I> 0) Base:0x00000000 Size:0x00000000
[0001.074] I> 1) Base:0xf7e00000 Size:0x00100000
[0001.078] I> 2) Base:0xf7d00000 Size:0x00100000
[0001.083] I> 3) Base:0xf7c00000 Size:0x00100000
[0001.087] I> 4) Base:0xf7b00000 Size:0x00100000
[0001.091] I> 5) Base:0xf7a00000 Size:0x00100000
[0001.096] I> 6) Base:0xf7600000 Size:0x00200000
[0001.100] I> 7) Base:0xf7000000 Size:0x00400000
[0001.105] I> 8) Base:0xf7900000 Size:0x00100000
[0001.109] I> 9) Base:0xf7800000 Size:0x00100000
[0001.114] I> 10) Base:0xf6800000 Size:0x00800000
[0001.118] I> 11) Base:0x30000000 Size:0x00040000
[0001.122] I> 12) Base:0xf7500000 Size:0x00100000
[0001.127] I> 13) Base:0x30040000 Size:0x00001000
[0001.131] I> 14) Base:0x30048000 Size:0x00001000
[0001.136] I> 15) Base:0x30049000 Size:0x00001000
[0001.140] I> 16) Base:0x3004a000 Size:0x00001000
[0001.145] I> 17) Base:0x3004b000 Size:0x00001000
[0001.149] I> 18) Base:0x3004c000 Size:0x00001000
[0001.153] I> 19) Base:0x3004d000 Size:0x00001000
[0001.158] I> 20) Base:0x3004e000 Size:0x00001000
[0001.162] I> 21) Base:0x3004f000 Size:0x00001000
[0001.167] I> 22) Base:0x00000000 Size:0x00000000
[0001.171] I> 23) Base:0xf7ff0000 Size:0x00010000
[0001.176] I> 24) Base:0x00000000 Size:0x00000000
[0001.180] I> 25) Base:0x00000000 Size:0x00000000
[0001.184] I> 26) Base:0x00000000 Size:0x00000000
[0001.189] I> 27) Base:0x00000000 Size:0x00000000
[0001.193] I> 28) Base:0x84400000 Size:0x00400000
[0001.198] I> 29) Base:0x30000000 Size:0x00010000
[0001.202] I> 30) Base:0xf8000000 Size:0x08000000
[0001.207] I> 31) Base:0x00000000 Size:0x00000000
[0001.211] I> 32) Base:0xf6000000 Size:0x00600000
[0001.215] I> 33) Base:0x80000000 Size:0x76000000
[0001.220] I> 34) Base:0x100000000 Size:0x180000000
[0001.224] I> 35) Base:0x00000000 Size:0x00000000
[0001.229] I> 36) Base:0x00000000 Size:0x00000000
[0001.233] I> 37) Base:0xf7fc0000 Size:0x00020000
[0001.238] I> 38) Base:0x84000000 Size:0x00400000
[0001.242] I> 39) Base:0x96000000 Size:0x02000000
[0001.247] I> 40) Base:0x84800000 Size:0x00b00000
[0001.251] I> 41) Base:0xf7f00000 Size:0x00080000
[0001.255] I> 42) Base:0x00000000 Size:0x00000000
[0001.260] I> 43) Base:0x00000000 Size:0x00000000
[0001.264] platform_init_interrupts-121, 1*
[0001.269] Interrupts Init done
[0001.272] calling constructors
[0001.275] initializing heap
[0001.278] initializing threads
[0001.281] initializing timers
[0001.284] creating bootstrap completion thread
[0001.288] top of bootstrap2()
[0001.291] CPU: ARM Cortex A57
[0001.295] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.300] initializing platform
[0001.303] I> Boot-device: eMMC
[0001.306] I> odm data is 1090000
[0001.309] I> Reading GPT from 512 for device 00000003
[0001.315] I> Reading GPT from 8388096 for device 00000003
[0001.322] I> Found 6 partitions in 00000003 device
[0001.326] I> Reading GPT from 512 for device 00010003
[0001.332] I> Found 17 partitions in 00010003 device
[0001.337] W> No valid slot number is found in scratch register
[0001.343] W> Return default slot: _a
[0001.346] I> A/B: bin_type (1) slot 0
[0001.349] I> Select partition: kernel-dtb
[0001.353] I> Loading partition kernel-dtb at 0x92000000
[0001.362] I> Kernel_dtb @0x92000000
[0001.365] I> Bl_dtb @0x85300000
[0001.368] I> gpio framework initialized
[0001.372] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.379] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.387] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.395] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.403] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.411] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
[0001.419] E> tegrabl_blob_init: BMP partition does not have valid Blob
[0001.425] E> tegrabl_load_bmp_blob: BMP blob initialization failed
[0001.431] W> Loading bmp blob to memory failed
[0001.439] I> Find /i2c@c250000's alias i2c7
[0001.443] I> Reading eeprom i2c=7 address=0x50
[0001.473] I> Device at /i2c@c250000:0x50
[0001.476] I> Reading eeprom i2c=7 address=0x57
[0001.505] I> Device at /i2c@c250000:0x57
[0001.510] I> Find /i2c@c240000's alias i2c1
[0001.514] I> Reading eeprom i2c=1 address=0x51
[0001.520] I> Eeprom read failed 0x1a800027
[0001.524] I> Find /i2c@3160000's alias i2c0
[0001.528] I> Reading eeprom i2c=0 address=0x50
[0001.534] I> Eeprom read failed 0x1a800027
[0001.538] I> Find /i2c@3180000's alias i2c2
[0001.542] I> Reading eeprom i2c=2 address=0x54
[0001.547] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.577] I> Disabling gpio chip_id = 2, gpio pin = 9
[0001.583] I> Device at /i2c@3180000:0x54
[0001.586] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.591] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.602] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.607] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.618] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.623] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.634] initializing target
[0001.637] calling apps_init()
[0001.641] starting app android_boot_app
[0001.645] I> Gpio keyboard init success
[0001.648] I> Kernel type = Normal
[0001.651] I> Loading kernel/boot.img ...
[0001.655] W> No valid slot number is found in scratch register
[0001.661] W> Return default slot: _a
[0001.664] I> A/B: bin_type (0) slot 0
[0001.668] I> Select partition: kernel
[0001.671] I> Loading partition kernel at 0xa8000000
[0001.752] W> No valid slot number is found in scratch register
[0001.758] W> Return default slot: _a
[0001.761] I> A/B: bin_type (1) slot 0
[0001.765] I> Select partition: kernel-dtb
[0001.769] I> Loading partition kernel-dtb at 0x92000000
[0001.777] I> Kernel DTB @ 0x92000000
[0001.781] I> Verified boot state = Orange
[0001.785] E> tegrabl_display_clear: display is not initialized
[0001.790] I> Checking boot.img header magic ... [0001.794] I> [OK]
[0001.796] I> Valid boot.img @ 0xa8000000
[0001.800] I> decompressor handler not found
[0001.804] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.811] I> Done
[0001.813] I> Move ramdisk (len: 6252235) from 0xa8071800 to 0x98000000
[0001.823] I> Updated bpmp info to DTB
[0001.828] I> Ramdisk: Base: 0x98000000; Size: 0x5f66cb
[0001.833] I> Updated initrd info to DTB
[0001.837] I> disabled_core_mask: 0xffffff0c
[0001.841] I> Kernel type = Normal
[0001.844] I> add_serialno: Serial Num = 0320817136116
[0001.849] W> No valid slot number is found in scratch register
[0001.854] W> Return default slot: _a
[0001.858] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0
[0001.897] I> Updated bootarg info to DTB
[0001.902] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:51:b0
[0001.908] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:51:b1
[0001.914] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:51:b2
[0001.920] E> "ids" doesn't exist, creating
[0001.924] E> "connection" doesn't exist, creating
[0001.929] E> "configs" doesn't exist, creating
[0001.933] I> create_pm_ids: id: 3310-1000-B00-E, len: 15
[0001.939] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.949] I> create_pm_ids: id: 2597-0000-501-B, len: 15
[0001.955] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.966] I> create_pm_ids: id: 3326-1000-100-M, len: 15
[0001.971] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
[0001.982] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
[0001.989] E> "i2c@c250000" doesn't exist, creating
[0001.993] E> "module@0x50" doesn't exist, creating
[0001.998] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
[0002.005] E> "module@0x57" doesn't exist, creating
[0002.010] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
[0002.017] E> "i2c@3180000" doesn't exist, creating
[0002.022] E> "module@0x54" doesn't exist, creating
[0002.029] I> Adding plugin-manager/ids/3310-1000-B00-E
[0002.035] I> Adding plugin-manager/configs/3310-mem-type 00
[0002.041] I> Adding plugin-manager/configs/3310-power-config 00
[0002.047] I> Adding plugin-manager/configs/3310-misc-config 00
[0002.052] I> Adding plugin-manager/configs/3310-modem-config 00
[0002.058] I> Adding plugin-manager/configs/3310-touch-config 00
[0002.064] I> Adding plugin-manager/configs/3310-display-config 00
[0002.070] E> "chip-id" doesn't exist, creating
[0002.074] I> Adding plugin-manager/chip-id/A02P
[0002.081] I> Updated memory info to DTB
[0002.086] E> "reset" doesn't exist, creating
[0002.091] E> "pmc-reset-reason" doesn't exist, creating
[0002.096] E> "pmic-reset-reason" doesn't exist, creating
[0002.101] I> disabled_core_mask: 0xffffff0c
[0002.112] I> tegrabl_load_kernel_and_dtb: Done


U-Boot 2016.07-g5971907 (Mar 01 2017 - 21:06:45 -0800)

TEGRA186
Model: NVIDIA P2771-0000-500
DRAM: 7.8 GiB
MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: eth0: ethernet@2490000
Hit any key to stop autoboot: 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
ERROR: phy_startup() failed: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:894/eqos_start()
ERROR: FAILED: -110
at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/drivers/net/dwc_eth_qos.c:1122/eqos_start()
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-00-04-4b-8c-51-b2
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
ethernet@2490000 Waiting for PHY auto negotiation to complete....... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-tegra186
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
*** ERROR: `serverip' not set
Config file not found
starting USB...
No controllers found
ethernet@2490000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.208 (638 ms)
Using ethernet@2490000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.208
Filename 'boot.scr.uimg'.
Load address: 0x90000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
ethernet@2490000 Waiting for PHY auto negotiation to complete...... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.1.208 (5665 ms)
Using ethernet@2490000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.208
Filename 'boot.scr.uimg'.
Load address: 0x80080000
Loading: T T T T T T bad length 6 < 28
T T T T
Retry count exceeded; starting again
Tegra186 (P2771-0000-500) #

#14
Posted 04/02/2017 06:05 PM   
This is not a flash log. I'm not saying flash.sh didn't produce this, but it begins to look like the data flash.sh is using is not a root file system (or something else is corrupt). I've seen similar odd behavior when for example wget was used to retrieve something for flash and it retrieved the actual web page rather than the item intended. If you don't have "tree" installed on your host you might want to install that. Then go into the "rootfs" directory of your driver package. What is the output of this (if you use click the forum "</>" icon while this is highlighted it'll keep it arranged nicely as a code block)? [code]sudo tree | head -n 30[/code] Output should look something like this: [code].../Linux_for_Tegra/rootfs> tree | head -n 30 . ├── bin │   ├── archdetect │   ├── bash │   ├── btrfs │   ├── btrfs-calc-size │   ├── btrfsck -> btrfs │   ├── btrfs-convert │   ├── btrfs-debug-tree │   ├── btrfs-find-root │   ├── btrfs-image │   ├── btrfs-map-logical │   ├── btrfs-select-super │   ├── btrfs-show-super │   ├── btrfstune │   ├── btrfs-zero-log │   ├── bunzip2 │   ├── busybox │   ├── bzcat │   ├── bzcmp -> bzdiff │   ├── bzdiff │   ├── bzegrep -> bzgrep │   ├── bzexe │   ├── bzfgrep -> bzgrep │   ├── bzgrep │   ├── bzip2 │   ├── bzip2recover │   ├── bzless -> bzmore │   ├── bzmore │   ├── cat [/code]
This is not a flash log. I'm not saying flash.sh didn't produce this, but it begins to look like the data flash.sh is using is not a root file system (or something else is corrupt). I've seen similar odd behavior when for example wget was used to retrieve something for flash and it retrieved the actual web page rather than the item intended.

If you don't have "tree" installed on your host you might want to install that. Then go into the "rootfs" directory of your driver package. What is the output of this (if you use click the forum "</>" icon while this is highlighted it'll keep it arranged nicely as a code block)?
sudo tree | head -n 30


Output should look something like this:
.../Linux_for_Tegra/rootfs> tree | head -n 30
.
├── bin
│   ├── archdetect
│   ├── bash
│   ├── btrfs
│   ├── btrfs-calc-size
│   ├── btrfsck -> btrfs
│   ├── btrfs-convert
│   ├── btrfs-debug-tree
│   ├── btrfs-find-root
│   ├── btrfs-image
│   ├── btrfs-map-logical
│   ├── btrfs-select-super
│   ├── btrfs-show-super
│   ├── btrfstune
│   ├── btrfs-zero-log
│   ├── bunzip2
│   ├── busybox
│   ├── bzcat
│   ├── bzcmp -> bzdiff
│   ├── bzdiff
│   ├── bzegrep -> bzgrep
│   ├── bzexe
│   ├── bzfgrep -> bzgrep
│   ├── bzgrep
│   ├── bzip2
│   ├── bzip2recover
│   ├── bzless -> bzmore
│   ├── bzmore
│   ├── cat

#15
Posted 04/02/2017 06:22 PM   
Scroll To Top

Add Reply