I have attached a bootlog of the system booting with two monitors connected, one to the first HDMI (DP1) and one monitor connected to the second HDMI(DP0):
[ 1.892687] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
[ 1.894157] tegradc 15210000.nvdisplay: Display dc.15210000 registered with id=0
[ 1.894164] DC OR NODE connected to /host1x/sor1
[ 1.894198] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 1.894226] parse_tmds_config: No tmds-config node
[ 1.894305] tegradc 15210000.nvdisplay: DT parsed successfully
[ 1.894341] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1250000, vi_iso_bw=1500000, max_bw=1500000
[ 1.901608] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s
[ 1.901610] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz
[ 1.901612] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz
[ 1.901642] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1
[ 1.901647] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1
[ 1.903222] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels
[ 1.903645] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
[ 1.903664] PD DISP0 index2 UP
[ 1.903957] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.904077] PD DISP1 index3 UP
[ 1.904164] PD DISP2 index4 UP
[ 1.906157] console [ttyS0] disabled
[ 1.917701] V_REF_TO_SYNC >= 1; H_REF_TO_SYNC < 0
[ 1.917705] tegradc 15210000.nvdisplay: Display timing doesn't meet restrictions.
[ 1.917709] tegradc 15210000.nvdisplay: hdmi: failed to get valid mode err=-22
[ 1.917712] PD DISP2 index4 DOWN
[ 1.917806] PD DISP1 index3 DOWN
[ 1.917885] PD DISP0 index2 DOWN
[ 1.919488] tegradc 15210000.nvdisplay: probed
[ 2.371518] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base_baud = 25500000) is a Tegra
[ 2.371558] nvmap_background_zero_thread: PP zeroing thread starting.
[ 2.377188] Console: switching to colour frame buffer device 160x64
[ 2.404914] tegradc 15210000.nvdisplay: fb registered
[ 2.404914] tegradc 15210000.nvdisplay: fb registered
[ 2.405093] gpio tegra-gpio wake21 for gpio=121(P:2)
[ 2.405093] gpio tegra-gpio wake21 for gpio=121(P:2)
[ 2.405126] PD DISP0 index2 UP
[ 2.405126] PD DISP0 index2 UP
[ 2.405530] PD DISP1 index3 UP
[ 2.405530] PD DISP1 index3 UP
[ 2.405613] PD DISP2 index4 UP
[ 2.405613] PD DISP2 index4 UP
[ 2.412424] rate get on hub 408000000
[ 2.412424] rate get on hub 408000000
[ 2.412832] Parent Clock set for DC plld2
[ 2.412832] Parent Clock set for DC plld2
[ 2.415138] dc clk 107964531
[ 2.415138] dc clk 107964531
[ 2.418313] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 2.418313] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 2.418316] rate get on compclk 107964531
[ 2.418316] rate get on compclk 107964531
[ 2.433459] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 2.433459] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 2.450130] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 2.450130] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 2.466787] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 2.466787] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 2.466955] tegradc 15220000.nvdisplay: Display dc.15220000 registered with id=1
[ 2.466955] tegradc 15220000.nvdisplay: Display dc.15220000 registered with id=1
[ 2.466960] DC OR NODE connected to /host1x/sor
[ 2.466960] DC OR NODE connected to /host1x/sor
[ 2.467003] parse_tmds_config: No tmds-config node
[ 2.467003] parse_tmds_config: No tmds-config node
[ 2.467081] tegradc 15220000.nvdisplay: DT parsed successfully
[ 2.467081] tegradc 15220000.nvdisplay: DT parsed successfully
[ 2.467256] tegradc 15220000.nvdisplay: vblank syncpt # 9 for dc 2
[ 2.467256] tegradc 15220000.nvdisplay: vblank syncpt # 9 for dc 2
[ 2.467261] tegradc 15220000.nvdisplay: vpulse3 syncpt # 11 for dc 2
[ 2.467261] tegradc 15220000.nvdisplay: vpulse3 syncpt # 11 for dc 2
[ 2.482248] V_REF_TO_SYNC >= 1; H_REF_TO_SYNC < 0
[ 2.482248] V_REF_TO_SYNC >= 1; H_REF_TO_SYNC < 0
[ 2.482252] tegradc 15220000.nvdisplay: Display timing doesn't meet restrictions.
[ 2.482252] tegradc 15220000.nvdisplay: Display timing doesn't meet restrictions.
[ 2.482255] tegradc 15220000.nvdisplay: hdmi: failed to get valid mode err=-22
[ 2.482255] tegradc 15220000.nvdisplay: hdmi: failed to get valid mode err=-22
[ 2.483299] tegradc 15220000.nvdisplay: probed
[ 2.483299] tegradc 15220000.nvdisplay: probed
[ 2.577106] tegradc 15210000.nvdisplay: vrr_setup failed
[ 2.577106] tegradc 15210000.nvdisplay: vrr_setup failed
[ 2.660533] tegradc 15220000.nvdisplay: fb registered
[ 2.660533] tegradc 15220000.nvdisplay: fb registered
[ 2.660553] console [ttyS0] enabled
[ 2.660553] console [ttyS0] enabled
[ 2.660557] bootconsole [uart0] disabled
[ 2.660557] bootconsole [uart0] disabled
[ 2.660703] gpio tegra-gpio wake19 for gpio=120(P:1)
[ 2.660703] gpio tegra-gpio wake19 for gpio=120(P:1)
[ 2.660892] rate get on hub 408000000
[ 2.660892] rate get on hub 408000000
[ 2.661097] Parent Clock set for DC plld3
[ 2.661097] Parent Clock set for DC plld3
[ 2.663186] dc clk 162000000
[ 2.663186] dc clk 162000000
[ 2.665569] tegradc 15220000.nvdisplay: Link compression not supported by the panel
[ 2.665569] tegradc 15220000.nvdisplay: Link compression not supported by the panel
[ 2.665573] rate get on compclk 162000000
[ 2.665573] rate get on compclk 162000000
[ 2.776941] tegradc 15220000.nvdisplay: vrr_setup failed
[ 2.776941] tegradc 15220000.nvdisplay: vrr_setup failed
[ 6.833358] random: nonblocking pool is initialized
[ 6.833358] random: nonblocking pool is initialized
[ 7.669407] tegradc 15210000.nvdisplay: blank - normal
[ 7.669407] tegradc 15210000.nvdisplay: blank - normal
[ 7.683418] tegradc 15210000.nvdisplay: unblank
[ 7.683418] tegradc 15210000.nvdisplay: unblank
[ 9.818461] tegradc 15210000.nvdisplay: hdmi: plugged
[ 9.827138] tegradc 15220000.nvdisplay: hdmi: plugged
[ 9.828650] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base_baud = 0) is a TEGRA_UART
[ 9.828821] serial-tegra 3130000.serial: RX in PIO mode
[ 9.829542] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART
[ 9.834496] gpio tegra-gpio-aon wake35 for gpio=16(V:2)
[ 9.834509] nct1008_nct72 7-004c: find device tree node, parsing dt
[ 9.834512] nct1008_nct72 7-004c: starting parse dt
[ 9.834573] nct1008_nct72 7-004c: success parsing dt
[ 9.834667] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail
[ 9.857136] gk20a 17000000.gp10b: failed to allocate secure buffer -12
[ 9.869329] tmp451: Enabled overheat logging at 104.00C
[ 9.869419] gpio tegra-gpio-aon wake35 for gpio=16(V:2)
[ 9.869446] nct1008_nct72 7-004c: nct1008_probe: initialized
[ 9.871794] THERMAL EST: found 3 subdevs
[ 9.871796] THERMAL EST num_resources: 0
[ 9.871799] [THERMAL EST subdev 0]
[ 9.871802] [THERMAL EST subdev 1]
[ 9.871804] [THERMAL EST subdev 2]
[ 9.872010] thermal thermal_zone8: Registering thermal zone thermal_zone8 for type thermal-fan-est
[ 9.872012] THERMAL EST: thz register success.
[ 9.872111] THERMAL EST: end of probe, return err: 0
[ 9.872280] tegra_profiler: Branch: Dev
[ 9.872281] tegra_profiler: Version: 1.109
[ 9.872282] tegra_profiler: Samples version: 37
[ 9.872284] tegra_profiler: IO version: 20
[ 9.872287] armv8_pmu: imp: 0x41, idcode: 0x1
[ 9.872290] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 9.872292] armv8_pmu: imp: 0x4e, idcode: 0x1
[ 9.872294] armv8_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0
[ 9.872296] armv8_pmu: imp: 0x4e, idcode: 0x1
[ 9.872297] armv8_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0
[ 9.872299] armv8_pmu: imp: 0x41, idcode: 0x1
[ 9.872301] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 9.872303] armv8_pmu: imp: 0x41, idcode: 0x1
[ 9.872304] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 9.872306] armv8_pmu: imp: 0x41, idcode: 0x1
[ 9.872308] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 9.872449] tegra_profiler: auth: init
[ 9.875016] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
[ 9.875023] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst
[ 9.875706] scsi host0: tegra_ahci
[ 9.875994] scsi host1: tegra_ahci
[ 9.876109] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24
[ 9.876111] ata2: DUMMY
[ 9.876727] spi-tegra114 3210000.spi: Static pin configuration used
[ 9.877074] spi-tegra114 c260000.spi: Static pin configuration used
[ 9.877388] spi-tegra114 3230000.spi: Static pin configuration used
[ 9.877698] spi-tegra114 3240000.spi: Static pin configuration used
[ 9.878318] tun: Universal TUN/TAP device driver, 1.6
[ 9.878319] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 9.878427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.878428] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.878462] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 9.878463] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 9.878602] PPP generic driver version 2.4.2
[ 9.878686] PPP BSD Compression module registered
[ 9.878692] PPP Deflate Compression module registered
[ 9.878703] PPP MPPE Compression module registered
[ 9.878713] NET: Registered protocol family 24
[ 9.878757] usbcore: registered new interface driver asix
[ 9.878781] usbcore: registered new interface driver ax88179_178a
[ 9.878804] usbcore: registered new interface driver cdc_ether
[ 9.878830] usbcore: registered new interface driver smsc95xx
[ 9.878849] usbcore: registered new interface driver net1080
[ 9.878868] usbcore: registered new interface driver cdc_subset
[ 9.878888] usbcore: registered new interface driver zaurus
[ 9.878921] usbcore: registered new interface driver cdc_ncm
[ 9.878940] usbcore: registered new interface driver qmi_wwan
[ 9.879222] usbcore: registered new interface driver cdc_acm
[ 9.879223] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.879243] usbcore: registered new interface driver cdc_wdm
[ 9.879273] usbcore: registered new interface driver usb-storage
[ 9.879315] usbcore: registered new interface driver usbserial
[ 9.879334] usbcore: registered new interface driver ftdi_sio
[ 9.879349] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 9.879366] usbcore: registered new interface driver option
[ 9.879380] usbserial: USB Serial support registered for GSM modem (1-port)
[ 9.879399] usbcore: registered new interface driver pl2303
[ 9.879412] usbserial: USB Serial support registered for pl2303
[ 9.879430] usbcore: registered new interface driver qcserial
[ 9.879443] usbserial: USB Serial support registered for Qualcomm USB modem
[ 9.879593] tegra-usb-cd usb_cd: otg phy is not available yet
[ 9.881490] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet
[ 10.009400] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 10.011877] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
[ 10.011888] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
[ 10.012036] i2c /dev entries driver
[ 10.013133] gspca_main: v2.14.0 registered
[ 10.013171] usbcore: registered new interface driver gspca_zc3xx
[ 10.013410] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 10.015032] FAN dev name: pwm-fan
[ 10.015076] FAN:gpio request success.
[ 10.015081] FAN: can't find tach_gpio
[ 10.015097] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 10.015243] pwm_fan_driver pwm-fan: unable to request PWM, trying legacy API
[ 10.015247] pwm_fan_driver pwm-fan: got pwm for fan
[ 10.015250] pwm_fan_driver pwm-fan: tach period: 1000
[ 10.015532] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 10.015535] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 10.015538] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 10.015541] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 10.015544] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 10.015547] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 10.015550] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 10.015553] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 10.015556] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 10.015558] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 10.015993] device-mapper: uevent: version 1.0.3
[ 10.016152] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 10.016355] sdhci: Secure Digital Host Controller Interface driver
[ 10.016356] sdhci: Copyright(c) Pierre Ossman
[ 10.016360] sdhci-pltfm: SDHCI platform and OF driver helper
[ 10.016629] sdhci-tegra 3460000.sdhci: Parent select= pll_p rate=408000000
[ 10.016914] sdhci-tegra 3460000.sdhci: Parent select= pll_c4_out0 rate=196249804
[ 10.017269] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
[ 10.017336] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
[ 10.017815] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.019261] sdhci-tegra 3460000.sdhci: voltage switch failed in probe, err: -524
[ 10.019355] usbcore: registered new interface driver usbhid
[ 10.019356] usbhid: USB HID core driver
[ 10.023679] tegra-i2c 3160000.i2c: no acknowledge from address 0x42
[ 10.024093] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87
[ 10.024200] ina3221x: probe of 0-0042 failed with error -121
[ 10.024653] tegra-i2c 3160000.i2c: no acknowledge from address 0x43
[ 10.025049] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87
[ 10.025139] ina3221x: probe of 0-0043 failed with error -121
[ 10.025458] nvadsp 2993000.adsp: in probe()...
[ 10.027113] nvadsp 2993000.adsp: Registering AMC Error Interrupt
[ 10.027140] nvadsp 2993000.adsp: AMC/ARAM initialized.
[ 10.027269] nvadsp 2993000.adsp: nvadsp_app_module_probe
[ 10.027710] tegra_central_actmon d230000.actmon: in probe()...
[ 10.029870] tegra_central_actmon d230000.actmon: initialization Completed for the device mc_all
[ 10.030314] kfuse 3830000.kfuse: initialized
[ 10.030636] Denver: backdoor interface is NOT available.
[ 10.031642] coresight-tmc 8030000.etf: TMC initialized
[ 10.031958] coresight-tpiu 8060000.tpiu: TPIU initialized
[ 10.032374] coresight-funnel 9010000.funnel_bccplex: FUNNEL initialized
[ 10.032717] coresight-funnel 8010000.funnel_major: FUNNEL initialized
[ 10.033084] coresight-replicator 8040000.replicator: REPLICATOR initialized
[ 10.033485] coresight-etm4x 9840000.ptm: ETM 4.0 initialized
[ 10.033824] coresight-etm4x 9940000.ptm: ETM 4.0 initialized
[ 10.034737] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized
[ 10.035076] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized
[ 10.035098] Module initialized successfully
[ 10.038622] camchar: rtcpu character device driver loaded
[ 10.040416] tegra186-aondbg aondbg: aondbg driver probe() OK
[ 10.040543] register_ari_mca_banks: Registered MCA ROC:IOB
[ 10.040607] register_ari_mca_banks: Registered MCA ROC:CCE
[ 10.041150] **** A57 ECC: Enabled
[ 10.041152] tegra18_a57_serr_init: on CPU 5 a A57 Core
[ 10.041274] parse_throttle_dt_data: Num cap clks = 4
[ 10.041277] parse_throttle_dt_data: clk=mcpu type=1
[ 10.041278] parse_throttle_dt_data: clk=bcpu type=2
[ 10.041284] parse_throttle_dt_data: clk=gpu type=4
[ 10.041285] parse_throttle_dt_data: clk=emc type=3
[ 10.041709] tegra_throttle_probe: probe successful. #cdevs=4
[ 10.041897] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available
[ 10.042332] Adding domain se-pd to PM domain host-pd
[ 10.043809] tegra-se-nvhost 15810000.se: initialized
[ 10.044214] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
[ 10.044515] tegra-se-nvhost 15820000.se: initialized
[ 10.044949] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
[ 10.045211] tegra-se-nvhost 15830000.se: initialized
[ 10.045498] tegra-se-nvhost 15830000.se: tegra_se_probe: complete
[ 10.045755] tegra-se-nvhost 15840000.se: initialized
[ 10.046132] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
[ 10.050082] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels
[ 10.052402] cpufreq: platform driver Initialization: pass
[ 10.052627] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff
[ 10.052631] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff
[ 10.052662] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ebc96
[ 10.052664] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9
[ 10.053719] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg
[ 10.054697] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported
[ 10.055797] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
[ 10.056086] sdhci-tegra 3440000.sdhci: Parent select= pll_p rate=408000000
[ 10.056336] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful
[ 10.058405] sdhci-tegra 3440000.sdhci: voltage switch failed in probe, err: -524
[ 10.059210] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39]
[ 10.059211] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b 81 c6 71
[ 10.060739] libphy: dwc_phy: probed
[ 10.062843] cpuidle: Initializing cpuidle driver init for Denver cluster
[ 10.062985] cpuidle: Initializing cpuidle driver init for A57 cluster
[ 10.063862] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered
[ 10.063865] Tachometer driver initialized with pulse_per_rev: 1 and win_len: 1
[ 10.066545] tegra210_adsp_audio_platform_probe: platform probe started
[ 10.067073] tegra210-adsp adsp_audio: Default param-type to BYTE for mp3-dec1
[ 10.067306] tegra210-adsp adsp_audio: Default param-type to BYTE for spkprot
[ 10.067602] tegra210-adsp adsp_audio: Default param-type to BYTE for src
[ 10.067874] tegra210-adsp adsp_audio: Default param-type to BYTE for aac-dec1
[ 10.068168] tegra210-adsp adsp_audio: Default param-type to BYTE for aec
[ 10.068172] tegra210-adsp adsp_audio: adma channel page address dt entry not found
[ 10.068173] tegra210-adsp adsp_audio: using adma channel page 0
[ 10.084069] tegra210_adsp_audio_platform_probe probe successfull.
[ 10.084069] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
[ 10.084203] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
[ 10.089426] OPE platform probe
[ 10.089493] OPE platform probe successful
[ 10.095421] tegra-snd-t186ref-mobile-rt565x sound: Failed to get HP Det GPIO, should be handled by codec
[ 10.095801] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr
[ 10.095952] sdhci-tegra 3400000.sdhci: Got CD GPIO
[ 10.095987] sdhci-tegra 3400000.sdhci: Got WP GPIO
[ 10.096118] sdhci-tegra 3400000.sdhci: Parent select= pll_p rate=408000000
[ 10.096264] sdhci-tegra 3400000.sdhci: wakeup init done, cd_irq: 250
[ 10.096437] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful
[ 10.097776] mmc0: MAN_BKOPS_EN bit is not set
[ 10.098255] sdhci-tegra 3400000.sdhci: voltage switch failed in probe, err: -524
[ 10.105036] mmc0: Skipping tuning since strobe enabled
[ 10.112276] mmc0: periodic cache flush enabled
[ 10.112284] mmc0: new HS400 MMC card at address 0001
[ 10.112576] mmcblk0: mmc0:0001 032G34 29.1 GiB
[ 10.112685] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB
[ 10.113905] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[ 10.129041] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39]
[ 10.129041] gpio tegra-gpio wake18 for gpio=101(M:3)
[ 10.129208] bcm54xx_low_power_mode(): put phy in iddq-lp mode
[ 10.139875] gpio tegra-gpio wake71 for gpio=125(P:6)
[ 10.139904] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr
[ 10.142098] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 10.142168] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 10.142232] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 10.142298] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 10.142364] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 10.142429] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 10.142497] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 10.142563] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 10.142630] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 10.142701] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 10.142770] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 <-> ADMAIF11 mapping ok
[ 10.142838] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 <-> ADMAIF12 mapping ok
[ 10.142902] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 <-> ADMAIF13 mapping ok
[ 10.142968] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 <-> ADMAIF14 mapping ok
[ 10.143035] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 <-> ADMAIF15 mapping ok
[ 10.143101] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 <-> ADMAIF16 mapping ok
[ 10.143169] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 <-> ADMAIF17 mapping ok
[ 10.143236] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 <-> ADMAIF18 mapping ok
[ 10.143302] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 <-> ADMAIF19 mapping ok
[ 10.143378] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 <-> ADMAIF20 mapping ok
[ 10.144407] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE1 <-> ADSP PCM1 mapping ok
[ 10.144473] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE2 <-> ADSP PCM2 mapping ok
[ 10.144498] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
[ 10.144523] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
[ 10.152226] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 10.173670] input: tegra-snd-t186ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input2
[ 10.174426] tegra-snd-t186ref-mobile-rt565x sound: codec-dai "dit-hifi" registered
[ 10.174429] tegra-snd-t186ref-mobile-rt565x sound: This is a dummy codec
[ 10.174832] GACT probability NOT on
[ 10.174841] Mirror/redirect action on
[ 10.174851] u32 classifier
[ 10.174852] Actions configured
[ 10.174870] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 10.175665] Initializing XFRM netlink socket
[ 10.176069] NET: Registered protocol family 10
[ 10.176776] NET: Registered protocol family 17
[ 10.176790] NET: Registered protocol family 15
[ 10.176796] 8021q: 802.1Q VLAN Support v1.8
[ 10.183580] Registered cp15_barrier emulation handler
[ 10.190692] Registered setend emulation handler
[ 10.191812] ata1: SATA link down (SStatus 0 SControl 300)
[ 10.192005] registered taskstats version 1
[ 10.192629] Adding domain ispa-pd to PM domain host-pd
[ 10.195030] isp 15600000.isp: initialized
[ 10.195377] Adding domain ve-pd to PM domain host-pd
[ 10.197901] nvcsi 150c0000.nvcsi: initialized
[ 10.198960] Wake76 for irq=199
[ 10.198961] Wake77 for irq=199
[ 10.198962] Wake78 for irq=199
[ 10.198963] Wake79 for irq=199
[ 10.198964] Wake80 for irq=199
[ 10.198964] Wake81 for irq=199
[ 10.198965] Wake82 for irq=199
[ 10.199275] xhci-tegra 3530000.xhci: UTMI port 0 has OTG_CAP
[ 10.199277] xhci-tegra 3530000.xhci: No USB3 port has OTG_CAP
[ 10.201329] spi-tegra114 3210000.spi: Static pin configuration used
[ 10.201653] xhci-tegra 3530000.xhci: Firmware timestamp: 2016-09-01 11:32:41 UTC, Version: 55.05 release
[ 10.202203] spi-tegra114 c260000.spi: Static pin configuration used
[ 10.202677] spi-tegra114 c260000.spi: chipselect 0 already in use
[ 10.202679] spi_master spi1: spi_device register error /spi@c260000/spi@0
[ 10.202682] spi_master spi1: Failed to create SPI device for /spi@c260000/spi@0
[ 10.202899] spi-tegra114 3230000.spi: Static pin configuration used
[ 10.203568] spi-tegra114 3240000.spi: Static pin configuration used
[ 10.203679] xhci-tegra 3530000.xhci: xHCI Host Controller
[ 10.203687] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 1
[ 10.204482] xhci-tegra 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00010810
[ 10.204497] xhci-tegra 3530000.xhci: irq 55, io mem 0x03530000
[ 10.204617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.204619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.204622] usb usb1: Product: xHCI Host Controller
[ 10.204623] usb usb1: Manufacturer: Linux 4.4.15-tegra xhci-hcd
[ 10.204625] usb usb1: SerialNumber: 3530000.xhci
[ 10.204850] hub 1-0:1.0: USB hub found
[ 10.204868] hub 1-0:1.0: 4 ports detected
[ 10.227796] xhci-tegra 3530000.xhci: xHCI Host Controller
[ 10.227802] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 2
[ 10.227904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 10.227907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.227909] usb usb2: Product: xHCI Host Controller
[ 10.227910] usb usb2: Manufacturer: Linux 4.4.15-tegra xhci-hcd
[ 10.227912] usb usb2: SerialNumber: 3530000.xhci
[ 10.228108] hub 2-0:1.0: USB hub found
[ 10.228122] hub 2-0:1.0: 3 ports detected
[ 10.348566] mmc1 tuning done saved tap delay=21
[ 10.348568] mmc1: hw tuning done ...
[ 10.348574] mmc1: tuning_window[0]: 0xffffffff
[ 10.348579] mmc1: tuning_window[1]: 0xffffc7ff
[ 10.348582] mmc1: tuning_window[2]: 0xe1ffffff
[ 10.348585] mmc1: tuning_window[3]: 0x7fffffff
[ 10.348589] mmc1: tuning_window[4]: 0x0
[ 10.348592] mmc1: tuning_window[5]: 0x0
[ 10.348596] mmc1: tuning_window[6]: 0x0
[ 10.348599] mmc1: tuning_window[7]: 0x0
[ 10.348602] sdhci: Tap value: 21 | Trim value: 5
[ 10.348628] sdhci: SDMMC_VENDOR_INTR_STATUS[0x108]: 0x40000
[ 10.352956] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 10.352989] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 10.367813] tegra-usb-cd usb_cd: notification status (0x0, 0x1)
[ 10.367816] tegra-usb-cd usb_cd: set current 0ma
[ 10.367820] tegra-xudc-new 3550000.xudc: device mode on
[ 10.370981] tegra186-cam-rtcpu b000000.rtcpu: booting sce with Camera RTCPU FW
[ 10.370998] tegra186-cam-rtcpu b000000.rtcpu: sce gets unhalted
[ 10.372103] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:echo@0: probing /dev/camchar-echo
[ 10.372905] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:dbg@7c00: probing /dev/camchar-dbg
[ 10.373063] tegra186-cam-rtcpu b000000.rtcpu: enabling tracing
[ 10.373147] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
[ 10.373389] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=2 ivc=2 sha1=fb16914d17f56e81ad21e716791045b9ac83064a
[ 10.373996] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
[ 10.374038] gpio tegra-gpio-aon wake67 for gpio=57(FF:1)
[ 10.374079] gpio tegra-gpio-aon wake68 for gpio=58(FF:2)
[ 10.374166] input: gpio-keys as /devices/gpio-keys/input/input3
[ 10.409054] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:23:07 UTC (946689787)
[ 10.423859] tegra-vi4 15700000.vi: initialized
[ 10.439192] bpmp: mounted debugfs mirror
[ 10.439556] [dram-timers] DRAM derating cdev registered.
[ 10.442398] VCC33: disabling
[ 10.442400] outp: disabling
[ 10.442403] outn: disabling
[ 10.442410] spmic-ldo0: disabling
[ 10.442599] spmic-ldo1: disabling
[ 10.442734] en-vdd-sd: disabling
[ 10.442736] vdd-usb0-5v: disabling
[ 10.442738] vdd-3v3: disabling
[ 10.442739] en-vdd-vcm-2v8: disabling
[ 10.442741] vdd-sys-bl: disabling
[ 10.448971] ALSA device list:
[ 10.448973] #0: tegra-hda at 0x3518000 irq 394
[ 10.448974] #1: tegra-snd-t186ref-mobile-rt565x
[ 10.519792] usb 1-2: new high-speed USB device number 2 using xhci-tegra
[ 10.560207] usb 2-1: new SuperSpeed USB device number 2 using xhci-tegra
[ 10.576109] usb 2-1: New USB device found, idVendor=0451, idProduct=8140
[ 10.576111] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.576596] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 6
[ 10.577923] hub 2-1:1.0: USB hub found
[ 10.578309] hub 2-1:1.0: 4 ports detected
[ 10.648149] usb 1-2: New USB device found, idVendor=0451, idProduct=8142
[ 10.648152] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 10.648154] usb 1-2: SerialNumber: BF040869F015
[ 10.648764] hub 1-2:1.0: USB hub found
[ 10.648810] hub 1-2:1.0: 4 ports detected
[ 10.759787] usb 1-3: new high-speed USB device number 3 using xhci-tegra
[ 10.888202] usb 1-3: New USB device found, idVendor=0451, idProduct=8142
[ 10.888204] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 10.888206] usb 1-3: SerialNumber: 470000891874
[ 10.888872] hub 1-3:1.0: USB hub found
[ 10.888920] hub 1-3:1.0: 4 ports detected
[ 10.959787] usb 1-2.1: new low-speed USB device number 4 using xhci-tegra
[ 11.055805] usb 1-2.1: New USB device found, idVendor=04ca, idProduct=002f
[ 11.055807] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.055809] usb 1-2.1: Product: USB Multimedia Keyboard
[ 11.055811] usb 1-2.1: Manufacturer: Lite-On Technology Corp.
[ 11.055941] usb 1-2.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 11.055957] usb 1-2.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.060382] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:04CA:002F.0001/input/input4
[ 11.115990] hid-generic 0003:04CA:002F.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-3530000.xhci-2.1/input0
[ 11.123468] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:04CA:002F.0002/input/input5
[ 11.159788] usb 1-3.1: new low-speed USB device number 5 using xhci-tegra
[ 11.175891] hid-generic 0003:04CA:002F.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-3530000.xhci-2.1/input1
[ 11.252920] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c03e
[ 11.252923] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.252924] usb 1-3.1: Product: USB-PS/2 Optical Mouse
[ 11.252926] usb 1-3.1: Manufacturer: Logitech
[ 11.253060] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.256214] input: Logitech USB-PS/2 Optical Mouse as /devices/3530000.xhci/usb1/1-3/1-3.1/1-3.1:1.0/0003:046D:C03E.0003/input/input6
[ 11.256312] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-3530000.xhci-3.1/input0
[ 11.327786] usb 1-3.2: new full-speed USB device number 6 using xhci-tegra
[ 11.416577] usb 1-3.2: New USB device found, idVendor=1546, idProduct=01a8
[ 11.416580] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.416581] usb 1-3.2: Product: u-blox GNSS receiver
[ 11.416583] usb 1-3.2: Manufacturer: u-blox AG - www.u-blox.com
[ 11.416700] usb 1-3.2: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 11.417144] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 6
[ 11.417480] cdc_acm 1-3.2:1.0: ttyACM0: USB ACM device
[ 12.332512] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 5
[ 12.332515] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work ignore firmware MBOX_CMD_DEC_SSPI_CLOCK request
[ 12.675483] Freeing unused kernel memory: 1132K (ffffffc000fe2000 - ffffffc0010fd000)
[ 12.685012] Freeing alternatives memory: 92K (ffffffc0010fd000 - ffffffc001114000)
[ 01:23:09 ] L4T initrd starts from here.....
[ 01:23:09 ] L4T-INITRD Build DATE: Sat Jan 1 01:23:09 UTC 2000
[ 01:23:09 ] Root device found: mmcblk0p1
Rootdevice found: /dev/mmcblk0p1
[ 12.737889] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 01:23:09 ] Rootfs mounted over mmcblk0p1
cp: not writing through dangling symlink 'etc/resolv.conf'
[ 01:23:09 ] Switching from initrd to actual rootfs
[ 12.809514] systemd[1]: System time before build time, advancing clock.
[ 12.838942] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 12.860935] systemd[1]: Detected architecture arm64.
Welcome to Ubuntu 16.04 LTS!
[ 12.876694] systemd[1]: Set hostname to <tegra-ubuntu>.
[ 13.011868] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 13.027881] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 13.043894] systemd[1]: Listening on LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
[ 13.059894] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 13.075862] systemd[1]: Listening on LVM2 poll daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ 13.091877] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 13.107907] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 13.127929] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 13.146977] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 13.163868] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 13.179849] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 13.208152] systemd[1]: Started Braille Device Support.
[ OK ] Started Braille Device Support.
[ 13.224126] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 13.239919] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 13.272117] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 13.298671] systemd[1]: Starting Load Kernel Modules...
[ 13.305992] gpio tegra-gpio-aon wake30 for gpio=60(FF:4)
Starting Load Kernel Modules...
[ 13.320132] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 13.336736] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
[ 13.359942] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 13.392106] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 13.403945] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 13.423976] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 13.439858] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 13.472097] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 13.488733] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 13.503946] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 13.519883] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 13.535862] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 13.564598] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 13.579963] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started LVM2 metadata daemon.
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
Starting Flush Journal to Persistent Storage...
[ OK ] Mounted Configuration File System.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
[ 13.774299] systemd-journald[240]: Received request to flush runtime journal from PID 1
Starting udev Kernel Device Manager...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Kernel Device Manager.
Starting LSB: QEMU KVM module loading script...
[ OK ] Started LSB: QEMU KVM module loading script.
[ 13.958012] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration
[ 13.970517] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails
[ OK ] Started udev Coldplug[ 13.979928] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes
all Devices.
[ 13.994320] tegra-pcie 10003000.pcie-controller: probing port 1, using 1 lanes
[ OK ] Found device /dev/ttyS0.
[ 14.007799] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 14.028930] gpiochip_add_data: registered GPIOs 240 to 247 on device: spi0.0
[ OK ] Reached target Sound Card.
[ 14.127254] tegra_net_perf_init: cannot get wifi sclk
[ 14.135770] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
[ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
[ 14.189007] GPIO line 237 (reset_i2c_spi_n) hogged as output/low
[ 14.198069] gpiochip_add_data: registered GPIOs 224 to 239 on device: mcp23017
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
[ 14.355957] cfg80211: World regulatory domain updated:
[ 14.355964] cfg80211: DFS Master region: unset
[ 14.355965] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.355970] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.355973] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.355976] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.355980] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 14.355983] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 14.355986] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.355989] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.355992] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.378052] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[ 14.378299] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc1e5941a70
[ 14.378868] tegra_sysfs_register
[ 14.378967] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 21
[ 14.447806] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[ 14.853928] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[ 15.256570] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[ 15.258582] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring
[ 15.258880] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00
[ 15.258883] pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff]
[ 15.258886] pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref]
[ 15.258888] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 15.258890] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 15.259117] iommu: Adding device 0000:00:01.0 to group 56
[ 15.259361] iommu: Adding device 0000:00:02.0 to group 57
[ 15.259401] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 15.259409] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 15.259832] iommu: Adding device 0000:01:00.0 to group 58
[ 15.260179] iommu: Adding device 0000:01:00.1 to group 59
[ 15.260525] iommu: Adding device 0000:01:00.2 to group 60
[ 15.260871] iommu: Adding device 0000:01:00.3 to group 61
[ 15.281762] pci 0000:00:01.0: BAR 8: assigned [mem 0x50100000-0x503fffff]
[ 15.281768] pci 0000:01:00.0: BAR 0: assigned [mem 0x50100000-0x5017ffff]
[ 15.281775] pci 0000:01:00.0: BAR 6: assigned [mem 0x50180000-0x501fffff pref]
[ 15.281777] pci 0000:01:00.1: BAR 0: assigned [mem 0x50200000-0x5027ffff]
[ 15.281783] pci 0000:01:00.2: BAR 0: assigned [mem 0x50280000-0x502fffff]
[ 15.281789] pci 0000:01:00.3: BAR 0: assigned [mem 0x50300000-0x5037ffff]
[ 15.281794] pci 0000:01:00.0: BAR 3: assigned [mem 0x50380000-0x50383fff]
[ 15.281800] pci 0000:01:00.1: BAR 3: assigned [mem 0x50384000-0x50387fff]
[ 15.281806] pci 0000:01:00.2: BAR 3: assigned [mem 0x50388000-0x5038bfff]
[ 15.281811] pci 0000:01:00.3: BAR 3: assigned [mem 0x5038c000-0x5038ffff]
[ 15.281818] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 15.281823] pci 0000:00:01.0: bridge window [mem 0x50100000-0x503fffff]
[ 15.281830] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 15.281887] pcieport 0000:00:01.0: enabling device (0000 -> 0002)
[ 15.281959] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 15.281961] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 15.281962] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 15.281963] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[ 15.281964] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
[ 15.282154] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 15.282343] igb 0000:01:00.0: enabling device (0000 -> 0002)
[ 15.330737] igb 0000:01:00.0: added PHC on eth1
[ 15.330821] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 15.330823] igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x2) 90:e2:ba:9f:c4:c4
[ 15.330827] igb 0000:01:00.0: eth1: PBA No: Unknown
[ 15.330829] igb 0000:01:00.0: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
[ 15.330881] igb 0000:01:00.1: enabling device (0000 -> 0002)
[ 15.379193] igb 0000:01:00.1: added PHC on eth2
[ 15.379277] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 15.379279] igb 0000:01:00.1: eth2: (PCIe:2.5Gb/s:Width x2) 90:e2:ba:9f:c4:c5
[ 15.379282] igb 0000:01:00.1: eth2: PBA No: Unknown
[ 15.379284] igb 0000:01:00.1: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
[ 15.379330] igb 0000:01:00.2: enabling device (0000 -> 0002)
[ 15.427503] igb 0000:01:00.2: added PHC on eth3
[ 15.427586] igb 0000:01:00.2: Intel(R) Gigabit Ethernet Network Connection
[ 15.427588] igb 0000:01:00.2: eth3: (PCIe:2.5Gb/s:Width x2) 90:e2:ba:9f:c4:c6
[ 15.427592] igb 0000:01:00.2: eth3: PBA No: Unknown
[ 15.427594] igb 0000:01:00.2: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
[ 15.427639] igb 0000:01:00.3: enabling device (0000 -> 0002)
[ 15.475821] igb 0000:01:00.3: added PHC on eth4
[ 15.475904] igb 0000:01:00.3: Intel(R) Gigabit Ethernet Network Connection
[ 15.475906] igb 0000:01:00.3: eth4: (PCIe:2.5Gb/s:Width x2) 90:e2:ba:9f:c4:c7
[ 15.475910] igb 0000:01:00.3: eth4: PBA No: Unknown
[ 15.475912] igb 0000:01:00.3: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
[ 15.475930] tegra-pcie 10003000.pcie-controller: speed change : Gen-1 -> Gen-2
Starting Clean up any mess left by 0dns-up...
Starting Set console keymap...
Starting Enable support for additional executable binary formats...
Starting Tell Plymouth To Write Out Runtime Data...
Starting LSB: AppArmor initialization...
Starting Create Volatile Files and Directories...
[FAILED] Failed to start Set console keymap.
See 'systemctl status console-setup.service' for details.
[ OK ] Started Enable support for additional executable binary formats.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started Clean up any mess left by 0dns-up.
[ OK ] Started LSB: AppArmor initialization.
[ OK ] Started Braille Device Support.
[ OK ] Created slice system-gpsdctl.slice.
Starting Tell Plymouth To Write Out Runtime Data...
Starting Load/Save RF Kill Switch Status...
Starting Raise network interfaces...
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Network Time Synchronization.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Started CUPS Scheduler.
[ OK ] Reached target Paths.
[ OK ] Listening on CUPS Scheduler.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
Starting Socket activation for snappy daemon.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Daily apt activities.
[ OK ] Reached target Timers.
[ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on Socket activation for snappy daemon.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Modem Manager...
Starting NVIDIA specific first-boot script...
[ OK ] Started CUPS Scheduler.
Starting Permit User Sessions...
[ OK ] Started crash report submission daemon.
[ OK ] Started Regular background program processing daemon.
Starting NVIDIA specific script...
Starting LSB: automatic crash report generation...
Starting System Logging Service...
[ OK ] Started D-Bus System Message Bus.
Starting Save/Restore Sound Card State...
[ OK ] Started Run anacron jobs.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started GPS (Global Positioning System) Daemon.
Starting Restore /etc/resolv.conf i...re the ppp link w[ 17.495642] gk20a 17000000.gp10b: railgate is disabled.
as shut down...
Starting Accounts Service...
Starting Network Manager...
Starting LSB: Speech Dispatcher...
Starting Manage ttyACM0 for GPS daemon...
Starting pulseaudio restart service...
Starting oFono Mobile telephony stack...
Starting Login Service...
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[ OK ] Started Manage ttyACM0 for GPS daemon.
[ OK ] Started Save/Restore Sound Card State.
[ 17.626419] Bluetooth: Core ver 2.21
[ 17.631290] NET: Registered protocol family 31
[ 17.637703] Bluetooth: HCI device and connection manager initialized
[ OK ] Started pulseaud[ 17.646048] Bluetooth: HCI socket layer initialized
io restart service.
[ 17.654825] Bluetooth: L2CAP socket layer initialized
[ 17.661566] Bluetooth: SCO socket layer initialized
[ OK ] Started Raise network interfaces.
[ OK ] Started NVIDIA specific script.
[ OK ] Started LSB: Speech Dispatcher.
[ OK ] Started LSB: automatic crash report generation.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started oFono Mobile telephony stack.
[ OK ] Started Network Manager.
[ OK ] Started Login Service.
Starting Network Manager Script Dispatcher Service...
Starting Network Manager Wait Online...
[ OK ] Started Make remote CUPS printers available locally.
Starting Authenticate and Authorize Users to Run Privileged Tasks...
[ OK ] Started nvpmodel service.
[ OK ] Reached target Network.
[ 17.852387] CPU1: shutdown
[ 17.856214] psci: CPU1 killed.
Starting OpenBSD Secure Shell server...
[ 17.863810] CPU2: shutdown
[ OK ] Stopped Light[ 17.869588] psci: CPU2 killed.
Display Manager.
Starting Light Display Manager...
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[ OK ] Started Accounts Service.
[ OK ] Started Modem Manager.
Starting Hostname Service...
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Light Display Manager.
[ OK ] Started Hostname Service.
[ OK ] Started NVIDIA specific first-boot script.
[ 18.012272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.085124] gpio tegra-gpio wake18 for gpio=101(M:3)
[ 18.094982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.110342] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.363947] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39]
[ 18.393223] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39]
[ 18.393224] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 18.464501] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 21
[ 18.627339] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
[ 18.627390] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
[ 18.627393] Enabling wake69
[ 18.645663] tegra_sysfs_on
[ 18.726883] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.816748] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.816750] 8021q: adding VLAN 0 to HW filter on device eth1
[ 18.824603] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 18.913644] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 18.913647] 8021q: adding VLAN 0 to HW filter on device eth2
[ 18.921289] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 19.011707] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 19.011709] 8021q: adding VLAN 0 to HW filter on device eth3
[ 19.022014] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 19.113688] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 19.113690] 8021q: adding VLAN 0 to HW filter on device eth4
Starting WPA supplicant...
[ OK ] Started WPA supplicant.
[ 19.343590] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
[ 19.374514] tegradc 15210000.nvdisplay: blank - powerdown
[ 19.473996] rate get on compclk 162000000
[ 19.474115] PD DISP1 index3 DOWN
[ 19.486953] tegradc 15210000.nvdisplay: unblank
[ 19.486961] PD DISP1 index3 UP
[ 19.487202] rate get on hub 408000000
[ 19.487490] Parent Clock set for DC plld2
[ 19.489161] dc clk 107964531
[ 19.491602] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 19.491606] rate get on compclk 162000000
[ 19.507443] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 19.524109] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 19.540771] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 20.589402] tegradc 15210000.nvdisplay: unblank
[ OK ] Created slice User Slice of nvidia.
Starting User Manager for UID 1001...
[ OK ] Started Session c1 of user nvidia.
Starting RealtimeKit Scheduling Policy Service...
[ OK ] Started RealtimeKit Scheduling Policy Service.
[ 21.342995] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.412211] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.453129] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.495617] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.505754] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.517437] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.552211] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.562381] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.577027] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
[ 21.617599] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz
Starting Bluetooth service...
[ OK ] Started User Manager for UID 1001.
[ OK ] Started Bluetooth service.
[ 21.696896] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.703044] Bluetooth: BNEP socket layer initialized
[ 21.888242] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 21.897624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.622256] fuse init (API version 7.23)
Starting Daemon for power management...
[ OK ] Started Daemon for power management.
[ 24.449325] tegradc 15210000.nvdisplay: blank - powerdown
[ 24.547995] rate get on compclk 162000000
[ 24.548109] PD DISP1 index3 DOWN
[ 24.561027] tegradc 15210000.nvdisplay: unblank
[ 24.561037] PD DISP1 index3 UP
[ 24.561275] rate get on hub 408000000
[ 24.561579] Parent Clock set for DC plld2
[ 24.563120] dc clk 107964531
[ 24.565612] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 24.565616] rate get on compclk 162000000
[ 24.581395] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 24.598064] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 24.614736] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 24.680447] tegradc 15210000.nvdisplay: unblank
Starting Manage, Install and Generate Color Profiles...
[ OK ] Started Manage, Install and Generate Color Profiles.
Starting Disk Manager...
Starting Locale Service...
[ OK ] Started Disk Manager.
[ OK ] Started Locale Service.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting /etc/rc.local Compatibility...
[ OK ] Started Argus daemon.
[ OK ] Started nvcamera daemon.
[ OK ] Started /etc/rc.local Compatibility.
Starting Hold until boot process finishes up...
[ OK ] Started Hold until boot process finishes up.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
disconnect second HDMI:
nvidia@tegra-ubuntu:~$ [ 421.793530] rate get on compclk 107964531
[ 421.798100] tegradc 15220000.nvdisplay: hdmi: unplugged
[ 421.817658] tegradc 15210000.nvdisplay: blank - powerdown
[ 421.921778] PD DISP2 index4 DOWN
[ 421.921896] PD DISP1 index3 DOWN
[ 421.921897] PD DISP0 index2 DOWN
[ 421.937176] tegradc 15210000.nvdisplay: unblank
[ 421.937186] PD DISP0 index2 UP
[ 421.937263] PD DISP1 index3 UP
[ 421.937264] PD DISP2 index4 UP
[ 421.938379] rate get on hub 408000000
[ 421.938705] Parent Clock set for DC plld2
[ 421.940361] dc clk 107964531
[ 421.942874] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 421.942879] rate get on compclk 107964531
[ 421.958683] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 421.975353] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 421.992018] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 422.063797] tegradc 15210000.nvdisplay: unblank
connect second HDMI
nvidia@tegra-ubuntu:~$ [ 432.463137] tegradc 15220000.nvdisplay: vrr_setup failed
[ 432.468718] tegradc 15220000.nvdisplay: hdmi: plugged
[ 432.481509] tegradc 15210000.nvdisplay: blank - powerdown
[ 432.583597] PD DISP2 index4 DOWN
[ 432.583713] PD DISP1 index3 DOWN
[ 432.583715] PD DISP0 index2 DOWN
[ 432.599050] tegradc 15210000.nvdisplay: unblank
[ 432.599061] PD DISP0 index2 UP
[ 432.599121] PD DISP1 index3 UP
[ 432.599122] PD DISP2 index4 UP
[ 432.600266] rate get on hub 408000000
[ 432.600639] Parent Clock set for DC plld2
[ 432.602230] dc clk 107964531
[ 432.604967] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 432.604973] rate get on compclk 107964531
[ 432.620592] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 432.637261] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 432.653919] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 432.725672] tegradc 15210000.nvdisplay: unblank
disconnect first HDMI
nvidia@tegra-ubuntu:~$ [ 447.695877] PD DISP2 index4 DOWN
[ 447.699383] PD DISP1 index3 DOWN
[ 447.702658] PD DISP0 index2 DOWN
[ 447.706172] tegradc 15210000.nvdisplay: hdmi: unplugged
[ 447.721846] tegradc 15210000.nvdisplay: blank - powerdown
[ 447.727343] tegradc 15210000.nvdisplay: unblank
[ 447.731954] tegradc 15210000.nvdisplay: unblank
connect first HDMI
nvidia@tegra-ubuntu:~$ [ 480.051861] PD DISP0 index2 UP
[ 480.055060] PD DISP1 index3 UP
[ 480.058203] PD DISP2 index4 UP
[ 480.076690] tegradc 15210000.nvdisplay: vrr_setup failed
[ 480.082063] PD DISP2 index4 DOWN
[ 480.085666] PD DISP1 index3 DOWN
[ 480.088982] PD DISP0 index2 DOWN
[ 480.092651] tegradc 15210000.nvdisplay: hdmi: plugged
[ 480.104123] tegradc 15210000.nvdisplay: blank - powerdown
[ 480.109643] tegradc 15210000.nvdisplay: unblank
[ 480.109664] PD DISP0 index2 UP
[ 480.109763] PD DISP1 index3 UP
[ 480.109767] PD DISP2 index4 UP
[ 480.111644] rate get on hub 408000000
[ 480.112767] Parent Clock set for DC plld2
[ 480.115299] dc clk 107964531
[ 480.120319] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 480.120330] rate get on compclk 107964531
[ 480.134150] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 480.150816] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 480.167471] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 481.219331] tegradc 15210000.nvdisplay: unblank
[ 481.296978] tegradc 15210000.nvdisplay: blank - powerdown
[ 481.392387] PD DISP2 index4 DOWN
[ 481.392499] PD DISP1 index3 DOWN
[ 481.392501] PD DISP0 index2 DOWN
[ 481.407768] tegradc 15210000.nvdisplay: unblank
[ 481.407796] PD DISP0 index2 UP
[ 481.407968] PD DISP1 index3 UP
[ 481.407970] PD DISP2 index4 UP
[ 481.409055] rate get on hub 408000000
[ 481.409378] Parent Clock set for DC plld2
[ 481.410987] dc clk 107964531
[ 481.413512] tegradc 15210000.nvdisplay: Link compression not supported by the panel
[ 481.413517] rate get on compclk 107964531
[ 481.429287] tegradc 15210000.nvdisplay: Window 3 assigned to head 1
[ 481.445956] tegradc 15210000.nvdisplay: Window 4 assigned to head 1
[ 481.462631] tegradc 15210000.nvdisplay: Window 5 assigned to head 1
[ 481.534487] tegradc 15210000.nvdisplay: unblank