We are really sorry about this issue.
Our server is broken at Tuesday and it can lead to some error downloading.
If you have accessed JetPack3.1 before, please remove all the downloaded file and restart JetPack again.
We are monitoring our server status now. Please let us know if you still met error.
Could you confirm where libgie1 package come from during the installation? It should be found within nv-gie-repo-ubuntu1604-rc-cuda8.0-trt2.1-20170328_1-1_arm64.deb. Right? But I cannot find it from the downloaded .deb file.
@AastaLLL, I tried again and still encounter the same problem with the exact same error message. It doesn’t seem to be related to the server crash issue that you mentioned. Could you please take a close look. We are stuck here and we really need to evaluate tx2 urgently.
By the way, it would be nice if Tx2 is preinstalled with JetPack and we, the customer, does not need to go through the trouble to setup.
Thanks.
I think the reason this is not pre-installed is because the uses for the Jetson can be quite different from person to person and an embedded system simply doesn’t have all the space a desktop PC has. Add to this that sometimes it is better to let the end user add on software just so the distributor does not need to deal with licensing (e.g., when you go to flash the Ubuntu file system the NVIDIA-provided direct hardware access files are added separately by the person doing the flash…it’s up to the end user to make the choice to mix them). Even if this software were pre-installed almost nobody would keep the original install due to bug fixes (most everyone would be flashing anyway).
NOTE: JetPack itself only installs to the host PC, though extra packages are convenient to add through JetPack.
This issue is related to our server crash last week.
Although we fixed this in hours, some local server have cached the broken version until cache expires.
Please re-download JetPack and reinstall in again.
By default, tensorRT will be installed after image is flashed. It won’t need any manually command to make it installed.
Please try it again and let us know the result.
Thanks and sorry for the inconvenience.