I’m thinking of connecting the action camera to Jetson TX1 using B 102 rev2 on J120 rev6.
However, since it is a linux beginner, I have no idea what I can do.
I downloaded the latest firmware (version 2.2) for Jetson TX1 based carrier boards from the auvidea support page.
However, I do not know how to update the firmware and I am interrupted.
Currently it is booting from SSD connected by USB. Do I have to update firmware in SSD instead of emmc?
I have asked Auvidea a couple of questions, but it is rate to get a reply and I can not do it well yet.
I am temporarily suspended to use B102 now. Sorry I can not corporate.
I’m now can connect B102 with J120 carries TX1 installed Jetpack 3.0. But i can only capture RGB video output and sizes 8.3MB. It takes 14ms to get single frame. If i change video output to YV12, frame capture sizes 3.2MB. It takes 6ms to get single frame. So i want to change video output to YV12 for shorter capture time. But When i change output format to YV12, i could only capture single frame. I know that problem come from configuring some register in TC358743 but failed to fix that. Have any one meet this situation before, please help me. I have been stuck on this problem for months.