Hi Wayne,
I am using an LG 3D LED Monitor. Here is the log for “dmesg” command:
[code][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.96-tegra (buildbrain@mobile-u64-1072) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Nov 9 19:42:57 PST 2016
[ 0.000000] CPU: Cortex A57 Processor [411fd071] revision 1
[ 0.000000] alternative: enabling workaround for ARM erratum 832075
[ 0.000000] Machine: jetson_tx1
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] Tegra reserved memory:
LP0: ff2bf000 - ff2bffff
Bootloader framebuffer: 00000000 - 00000000
Bootloader framebuffer2: 00000000 - 00000000
Framebuffer: 00000000 - 00000000
2nd Framebuffer: 00000000 - 00000000
Carveout: 00000000 - 00000000
Vpr: 00000000 - 00000000
Tsec: 00000000 - 00000000
Bootloader Debug Data: 00000000 - 00000000
[ 0.000000] Nvdumper: ff23f000 - ff23ffff
[ 0.000000] cma: CMA: reserved 16 MiB at fdc00000
[ 0.000000] On node 0 totalpages: 1043968
[ 0.000000] DMA32 zone: 7168 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 519680 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm64/boot/dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
[ 0.000000] DTB Build time: Nov 9 2016 19:40:03
[ 0.000000] Tegra21: Speedo/IDDQ fuse revision 4
[ 0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2
[ 0.000000] Tegra21: CPU Process ID 0, Soc Process ID 1, Gpu Process ID 0
[ 0.000000] Tegra21: CPU Speedo value 2064, Soc Speedo value 1965, Gpu Speedo value 2082
[ 0.000000] Tegra21: CPU IDDQ 2376, Soc IDDQ 2576, Gpu IDDQ 3335
[ 0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 1 Bootrom patch v0x3f
[ 0.000000] tegra: PLLP fixed rate: 408000000
[ 0.000000] pll_u: boot with h/w control already set
[ 0.000000] pll_x boot misc1 0x0 : expected 0x20
[ 0.000000] (comparison mask = 0xffffff)
[ 0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000
[ 0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000
[ 0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000
[ 0.000000] Lowering se maximum rate from 1000000000 to 627200000
[ 0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000
[ 0.000000] Lowering msenc maximum rate from 1000000000 to 716800000
[ 0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000
[ 0.000000] Lowering vi maximum rate from 1000000000 to 793600000
[ 0.000000] Lowering isp maximum rate from 1000000000 to 793600000
[ 0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000
[ 0.000000] Lowering sbus maximum rate from 600000000 to 408000000
[ 0.000000] Lowering host1x maximum rate from 600000000 to 408000000
[ 0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000
[ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000
[ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000
[ 0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000
[ 0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000
[ 0.000000] Lowering sor0 maximum rate from 600000000 to 540000000
[ 0.000000] Lowering sor1 maximum rate from 600000000 to 594000000
[ 0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000
[ 0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000
[ 0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000
[ 0.000000] Lowering hda maximum rate from 102000000 to 51000000
[ 0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000
[ 0.000000] Lowering qspi maximum rate from 163200000 to 116600000
[ 0.000000] Lowering gbus maximum rate from 1300000000 to 998400000
[ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000
[ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000
[ 0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
[ 0.000000] tegra dvfs: vdd_core: nominal 1075mV, offset 0uV, step 12500uV, scaling enabled
[ 0.000000] tegra dvfs: vdd_gpu: nominal 1100mV, offset 710000uV, step 10000uV, scaling enabled
[ 0.000000] Tegra reset control registration success
[ 0.000000] tegra_powergate_init: DONE
[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fecf000 s20800 r8192 d24256 u53248
[ 0.000000] pcpu-alloc: s20800 r8192 d24256 u53248 alloc=134096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029632
[ 0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 2030MB 2048MB = 4078MB total
[ 0.000000] Memory: 4067000k/4067000k available, 108872k reserved
[ 0.000000] Virtual kernel memory layout:
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000 ( 56 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB)
.init : 0xffffffc00114f000 - 0xffffffc0011ba140 ( 429 kB)
.text : 0xffffffc000080000 - 0xffffffc00114e3a4 ( 17209 kB)
.data : 0xffffffc0011ce000 - 0xffffffc00139e7f0 ( 1858 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:704 nr_irqs:704 0
[ 0.000000] the number of interrupt controllers found is 6
[ 0.000000] Architected local timer running at 19.20MHz (phys).
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try ‘cgroup_disable=memory’ option if you don’t want memory cgroups
[ 0.023457] Calibrating delay loop (skipped), value calculated using timer frequency… lpj=192000
[ 0.032265] pid_max: default: 32768 minimum: 301
[ 0.036957] Security Framework initialized
[ 0.040990] Mount-cache hash table entries: 256
[ 0.099550] Initializing cgroup subsys debug
[ 0.101855] Initializing cgroup subsys memory
[ 0.106193] Initializing cgroup subsys devices
[ 0.110592] Initializing cgroup subsys freezer
[ 0.115001] Initializing cgroup subsys net_cls
[ 0.119420] Initializing cgroup subsys blkio
[ 0.123674] Initializing cgroup subsys perf_event
[ 0.128541] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.170269] ftrace: Allocated trace_printk buffers
[ 0.230801] Brought up 4 CPUs
[ 0.231779] SMP: Total of 4 processors activated.
[ 0.236471] alternatives: patching kernel code
[ 0.243431] devtmpfs: initialized
[ 0.253806] pinctrl core: initialized pinctrl subsystem
[ 0.257266] regulator-dummy: ; Rail ON
[ 0.261106] Initializing plugin-manager
[ 0.264949] node /plugin-manager/fragment-e3326@0 match with board 3326-
[ 0.272011] node /plugin-manager/fragement@0 match with board >=2180-1000-300
[ 0.279001] NET: Registered protocol family 16
[ 0.284812] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.290627] console [pstore-1] enabled
[ 0.293529] ramoops: attached 0x200000@0xff03f000, ecc: 0/0
[ 0.299340] I2C first dynamic bus number based on alias = 7
[ 0.304669] cpuidle: using governor ladder
[ 0.308689] cpuidle: using governor menu
[ 0.313373] PMC: Setting PMIC interrupt active-low
[ 0.318058] tegra-pmc device create success
[ 0.321580] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.328712] Clear bootloader IO dpd settings
[ 0.332968] PMC: configuring io pad defaults
[ 0.337382] PMC: IO pad audio voltage is 1800000
[ 0.341906] PMC: IO pad cam voltage is 1800000
[ 0.346316] PMC: IO pad dbg voltage is 1800000
[ 0.350745] PMC: IO pad dmic voltage is 1800000
[ 0.355244] PMC: IO pad pex-ctrl voltage is 1800000
[ 0.360096] PMC: IO pad spi voltage is 1800000
[ 0.364524] PMC: IO pad uart voltage is 1800000
[ 0.369023] PMC: IO pad bb voltage is 1800000
[ 0.373365] PMC: IO pad audio-hv voltage is 1800000
[ 0.378210] PMC: IO pad spi-hv voltage is 1800000
[ 0.382898] PMC: IO pad gpio voltage is 1800000
[ 0.387397] PMC: IO pad sdmmc3 voltage is 1800000
[ 0.391993] PMC: IO pad pex-bias power is disable
[ 0.396663] PMC: IO pad pex-clk1 power is disable
[ 0.401351] PMC: IO pad pex-clk2 power is disable
[ 0.406014] T210 pmc padctrl driver initialized
[ 0.410562] T210 pmc config for bootrom command passed
[ 0.416536] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled
[ 0.423205] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0
[ 0.431334] platform tegra-carveouts.23: SMMU isn’t ready yet
[ 0.435581] platform tegra-carveouts.23: domain=ffffffc0fe239e58 allocates as[0]=ffffffc0fe1e80a8
[ 0.443975] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.450535] bpmp: connect returned 0
[ 0.453900] mapped MMIO address: 0xffffff8000038000 → 0x70019000
[ 0.459582] mapped MMIO address: 0xffffff800005e000 → 0x7001c000
[ 0.465662] mapped MMIO address: 0xffffff8000096000 → 0x7001d000
[ 0.472557] Wake16 for irq=34
[ 0.479917] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found
[ 0.485597] tegra210-pinctrl 700008d4.pinmux: lookup the user state unused not found
[ 0.493299] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver
[ 0.500415] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245
[ 0.508323] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name wlan-default
[ 0.515851] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control
[ 0.523571] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control
[ 0.531315] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[ 0.540770] Wake44 for irq=81
[ 0.541767] Wake40 for irq=53
[ 0.544687] Wake41 for irq=53
[ 0.547634] Wake42 for irq=53
[ 0.550580] Wake43 for irq=53
[ 0.553894] platform 70006000.serial: domain=ffffffc0fe20b158 allocates as[0]=ffffffc0fe1e8110
[ 0.562803] platform sound.27: domain=ffffffc0fe28ddd8 allocates as[0]=ffffffc0fe1e8178
[ 0.571563] platform tegradc.1: domain=ffffffc0fe28d9d8 allocates as[0]=ffffffc0fe1e81e0
[ 0.579636] platform gpu.0: domain=ffffffc0fe28d758 allocates as[0]=ffffffc0fe1e8248
[ 0.585913] platform gpu.0: domain=ffffffc0fe28d758 allocates as[1]=ffffffc0fe1e82b0
[ 0.593619] platform gpu.0: domain=ffffffc0fe28d758 allocates as[2]=ffffffc0fe1e8318
[ 0.601327] platform gpu.0: domain=ffffffc0fe28d758 allocates as[3]=ffffffc0fe1e8380
[ 0.610425] platform 1003000.pcie-controller: domain=ffffffc0fe28d558 allocates as[0]=ffffffc0fe1e83e8
[ 0.619598] platform sdhci-tegra.3: domain=ffffffc0fe28d0d8 allocates as[0]=ffffffc0fe1e8450
[ 0.627017] platform sdhci-tegra.0: domain=ffffffc0fe2f9dd8 allocates as[0]=ffffffc0fe1e84b8
[ 0.635293] Wake39 for irq=52
[ 0.643882] gpio wake52 for gpio=61
[ 0.645584] gpio wake8 for gpio=58
[ 0.648785] gpio wake8 for gpio=58
[ 0.653011] irq: no irq domain found for /soctherm@0x700E2000 !
[ 0.658150] irq: no irq domain found for /soctherm@0x700E2000 !
[ 0.664088] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00
[ 0.671059] PMC dt information non-NULL tegra_init_suspend
[ 0.681470] Loading EMC tables…
[ 0.682870] tegra: Using EMC sequence ‘21021’ for Rev. 7 tables
[ 0.688696] tegra: emc: Derated table is valid.
[ 0.693212] Lowering emc maximum rate from 1800000000 to 1600000000
[ 0.699444] tegra: validated EMC DFS table
[ 0.709240] swapper/0 isomgr_init(): iso emc max clk=1600000KHz
[ 0.713196] swapper/0 isomgr_init(): max_iso_bw=11520000KB
[ 0.718804] vdso: 2 pages (1 code, 1 data) at base ffffffc0011d6000
[ 0.724891] vdso32: 2 pages (1 code, 1 data) at base ffffffc0011d5000
[ 0.731314] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.738204] nvdumper: last reboot was unknown
[ 0.742391] nvdumper: set_dirty_state 0x2badface
[ 0.747312] Tegra restart notifier registered.
[ 0.758547] bio: create slab at 0
[ 0.761878] vdd-ac-bat: 5000 mV ; Rail ON
[ 0.764698] vdd-cpu-fixed: 1000 mV ; Rail ON
[ 0.769243] vgaarb: loaded
[ 0.771782] SCSI subsystem initialized
[ 0.775240] libata version 3.00 loaded.
[ 0.775365] usbcore: registered new interface driver usbfs
[ 0.780713] usbcore: registered new interface driver hub
[ 0.786020] usbcore: registered new device driver usb
[ 0.791597] gpio wake33 for gpio=188
[ 0.796011] regulator_get() failed for (1-0074,vcc), -19
[ 0.799830] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered
[ 0.807803] tegra-i2c 7000c400.i2c: no acknowledge from address 0x74
[ 0.814091] pca953x 1-0074: failed reading register
[ 0.818895] pca953x: probe of 1-0074 failed with error -121
[ 0.824686] regulator_get() failed for (1-0077,vcc), -19
[ 0.829727] pca953x 1-0077: no regulator found for vcc. Assuming vcc is always powered
[ 0.838302] gpio wake36 for gpio=202
[ 0.841291] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539
[ 0.848411] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings
[ 0.856032] max77620 4-003c: CID0: 0xaf
[ 0.859101] max77620 4-003c: CID1: 0x03
[ 0.862927] max77620 4-003c: CID2: 0x04
[ 0.866725] max77620 4-003c: CID3: 0x59
[ 0.870550] max77620 4-003c: CID4: 0x3c
[ 0.874351] max77620 4-003c: CID5: 0x80
[ 0.878164] max77620 4-003c: MAX77620 PMIC OTP Version is 0x3C
[ 0.885313] max77620-pmic max77620-pmic: Consumer c2 does not have device name
[ 0.891994] vdd_core: 600 <–> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON
[ 0.899761] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON
[ 0.906094] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON
[ 0.913081] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON
[ 0.918900] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.924695] avdd-sys: supplied by vdd-pre-reg
[ 0.929398] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.935251] vdd-pex: supplied by vdd-pre-reg
[ 0.939810] vddio-sdmmc1: 1800 <–> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.948306] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF
[ 0.954929] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.961042] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF
[ 0.968289] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF
[ 0.974116] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.980493] vdd-gen-pll-edp: supplied by vdd-pre-reg
[ 0.985942] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[ 0.992016] vdd-hdmi-dp: supplied by vdd-pre-reg
[ 0.996883] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default
[ 1.004606] gpiochip_add: registered GPIOs 1000 to 1007 on device: max77620-gpio
[ 1.012996] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized
[ 1.022149] max77620 4-003c: max77620 probe successfully
[ 1.025985] media: Linux media interface: v0.10
[ 1.029998] Linux video capture interface: v2.00
[ 1.034976] pps_core: LinuxPPS API ver. 1 registered
[ 1.039505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 1.048632] PTP clock support registered
[ 1.052831] Tegra WDT enabled on probe. Timeout = 120 seconds.
[ 1.058503] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
[ 1.065243] Advanced Linux Sound Architecture Driver Initialized.
[ 1.070428] Bluetooth: Core ver 2.16
[ 1.073672] NET: Registered protocol family 31
[ 1.078070] Bluetooth: HCI device and connection manager initialized
[ 1.084417] Bluetooth: HCI socket layer initialized
[ 1.089255] Bluetooth: L2CAP socket layer initialized
[ 1.094300] Bluetooth: SCO socket layer initialized
[ 1.100171] vdd-3v3: 3300 mV ; Rail ON
[ 1.103919] max77620-gpio7: 1050 mV ; Rail ON
[ 1.107229] max77620-gpio7: supplied by vdd-gen-pll-edp
[ 1.112606] lcd-bl-en: 1800 mV ; Rail ON
[ 1.116467] en-vdd-sd: 3300 mV ; Rail OFF
[ 1.120335] en-vdd-sd: supplied by vdd-3v3
[ 1.124458] reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
[ 1.132520] en-vdd-cam: 1800 mV ; Rail OFF
[ 1.142869] vdd-sys-boost: 5000 mV ; Rail ON
[ 1.145275] platform 7.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.153227] aux-3v3: 3300 mV ; Rail ON
[ 1.156979] snsr_pm: 3300 mV ; Rail ON
[ 1.161210] vdd-disp-3v0: 3000 mV ; Rail ON
[ 1.164838] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.172849] usb-vbus1: 5000 mV ; Rail OFF
[ 1.176726] usb-vbus1: supplied by vdd-3v3
[ 1.180956] usb-vbus3: 5000 mV ; Rail OFF
[ 1.184784] usb-vbus3: supplied by vdd-3v3
[ 1.188942] platform c9.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.196967] platform ca.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.205024] platform cb.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.213081] platform cc.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.221142] platform cd.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.229173] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
[ 1.237051] platform ce.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 1.245200] rtl-5v0: ; Rail OFF
[ 1.248352] en-usb-vbus2: ; Rail OFF
[ 1.252183] en-vdd-cam-1v2: ; Rail OFF
[ 1.255505] en-vdd-cam-1v2: supplied by vdd-3v3
[ 1.260146] en-vdd-vcm-2v8: ; Rail ON
[ 1.263650] en-vdd-vcm-2v8: supplied by vdd-3v3
[ 1.268557] en-vdd-cam-1v2-alt: ; Rail OFF
[ 1.272701] regulator-pwm 0.pwm-regulator: PWM request deferred
[ 1.278098] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral
[ 1.286021] vdd_gpu: applied init 1000000uV constraint
[ 1.290761] vdd_gpu: 710 <–> 1320 mV at 1000 mV ; Rail OFF
[ 1.296722] vdd_cpu: applied init 1000000uV constraint
[ 1.301420] vdd_cpu: 708 <–> 1322 mV at 1000 mV normal ; Rail ON
[ 1.308032] gpio wake34 for gpio=200
[ 1.312220] extcon-gpio-states 1.extcon: Cable state 1
[ 1.317452] Switching to clocksource arch_sys_counter
[ 1.335435] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 1.340155] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048
[ 1.349452] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout
[ 1.357749] nvmap_page_pool_init: Total RAM pages: 1020846
[ 1.363204] nvmap_page_pool_init: nvmap page pool size: 127605 pages (498 MB)
[ 1.370395] nvmap_background_zero_thread: PP zeroing thread starting.
[ 1.377298] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 1.384142] nvmap:inner cache maint threshold=2097152
[ 1.395567] Wake39 for irq=52
[ 1.396729] Could not add tegra-otg to power domain using device tree
[ 1.403184] tegra-otg tegra-otg: otg transceiver registered
[ 1.408968] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 1.417790] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 1.425637] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 1.433932] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 1.442316] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[ 1.451308] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[ 1.459328] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
[ 1.468478] tegra21_plle_clk_enable: pll_e is already enabled
[ 1.473615] t210_sata_uphy_pll_init: init sata uphy pll
[ 1.478792] t210_sata_uphy_pll_init SATA uses SATA Lane
[ 1.484307] tegra_xusb_padctl_phy_enable: init pex uphy pll
[ 1.490755] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sys is having fixed voltage 1800000
[ 1.498457] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-uart is having fixed voltage 1800000
[ 1.507373] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio is having fixed voltage 1800000
[ 1.516389] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-cam is having fixed voltage 1800000
[ 1.525222] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-pex-ctrl is having fixed voltage 1800000
[ 1.534502] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc1 is having voltages: 1800000:3300000
[ 1.543949] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc3 is having fixed voltage 1800000
[ 1.553040] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc4 is having fixed voltage 1800000
[ 1.562143] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio-hv is having fixed voltage 1800000
[ 1.571420] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-debug is having fixed voltage 1800000
[ 1.580417] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dmic is having fixed voltage 1800000
[ 1.589353] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-gpio is having fixed voltage 1800000
[ 1.598284] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi is having fixed voltage 1800000
[ 1.607127] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi-hv is having fixed voltage 1800000
[ 1.616221] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc2 is having fixed voltage 1800000
[ 1.625322] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dp is having fixed voltage 1800000
[ 1.634026] tegra210-pmc-iopower pmc-iopower.29: NO_IO_POWER setting 0x0
[ 1.640874] NET: Registered protocol family 2
[ 1.645637] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.652396] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.658981] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.665368] TCP: reno registered
[ 1.668502] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.674516] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.681149] NET: Registered protocol family 1
[ 1.685519] RPC: Registered named UNIX socket transport module.
[ 1.691121] RPC: Registered udp transport module.
[ 1.695814] RPC: Registered tcp transport module.
[ 1.700477] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.706905] PCI: CLS 0 bytes, default 64
[ 1.707219] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[ 1.713766] Trying to unpack rootfs image as initramfs…
[ 1.951614] Freeing initrd memory: 6740K (ffffffc003100000 - ffffffc003795000)
[ 1.960500] host1x host1x: initialized
[ 1.966045] NTFS driver 2.1.30 [Flags: R/O].
[ 1.968482] fuse init (API version 7.22)
[ 1.972374] msgmni has been set to 7988
[ 1.977106] io scheduler noop registered (default)
[ 1.980935] Tegra cpuquiet initialized: disabled
[ 1.987003] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[ 1.993008] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
[ 2.003052] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
[ 2.033174] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[ 2.037619] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
[ 2.044058] tegra-pcie 1003000.pcie-controller: PCIE: no ports detected
[ 2.050813] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails
[ 2.059213] tsec tsec: initialized
[ 2.061828] tsec tsecb: initialized
[ 2.066004] nvdec nvdec: initialized
[ 2.070459] falcon vic03: initialized
[ 2.073519] falcon msenc: initialized
[ 2.076886] falcon nvjpg: initialized
[ 2.080253] tegradc tegradc.1: Display dc.54240000 registered with id=0
[ 2.086035] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1
[ 2.093353] display board info: id 0x0, fab 0x0
[ 2.098345] display board info: id 0x0, fab 0x0
[ 2.102604] invalid panel compatible
[ 2.105758] parse_tmds_config: No tmds-config node
[ 2.110619] of_dc_parse_platform_data: could not find vrr-settings node
[ 2.117125] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
[ 2.123787] of_dc_parse_platform_data: could not find SD settings node
[ 2.130194] of_dc_parse_platform_data: could not find cmu node
[ 2.136012] of_dc_parse_platform_data: could not find cmu node for adobeRGB
[ 2.142967] tegradc tegradc.1: DT parsed successfully
[ 2.148183] hdmi: couldn’t get regulator vdd_hdmi_5v0
[ 2.153155] display board info: id 0x0, fab 0x0
[ 2.158064] gpio wake53 for gpio=225
[ 2.162049] tegradc tegradc.1: probed
[ 2.246807] Console: switching to colour frame buffer device 80x30
[ 2.254379] tegradc tegradc.1: fb registered
[ 2.259217] tegra_camera_platform tegra-camera-platform.45: tegra_camera_probe:camera_platform_driver probe
[ 2.269691] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera’s max_iso_bw 3600000
[ 2.280971] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
[ 2.290452] tegra-adma tegra210-adma: Tegra210 ADMA driver register 10 channels
[ 2.298701] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.305484] of_serial 70006000.serial: RX periodic polling enabled
[ 2.311315] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
[ 2.318102] console [ttyS0] enabled, bootconsole disabled
[ 2.328976] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
[ 2.340254] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
[ 2.351368] serial-tegra 70006300.serial: RX in PIO mode
[ 2.358359] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
[ 2.371497] (null): coherent DMA mask is unset
[ 2.377723] gk20a gpu.0: failed to allocate secure buffer -12
[ 2.390253] brd: module loaded
[ 2.397477] loop: module loaded
[ 2.402679] zram: Created 1 device(s) …
[ 2.408397] nct1008_nct72 0-004c: find device tree node, parsing dt
[ 2.416353] nct1008_nct72 0-004c: starting parse dt
[ 2.422954] nct1008_nct72 0-004c: success parsing dt
[ 2.429581] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
[ 2.437520] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.445764] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.453391] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.461542] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.469084] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.477156] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.484672] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.492699] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.500113] nct1008_nct72 0-004c: nct1008_read_reg: err -11
[ 2.506999] NCT72: ERR: remote sensor circuit is open (0xfffffff5)
[ 2.514493] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.522468] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.529834] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.537741] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.545083] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.552928] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.560206] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x4c
[ 2.568052] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 2.575295] nct1008_nct72 0-004c: nct1008_write_reg: err -11
[ 2.582128] nct1008_nct72 0-004c:
exit nct1008_configure_sensor, err=-11
[ 2.592730] nct1008_nct72 0-004c:
error file: /dvs/git/dirty/git-master_linux/kernel/drivers/misc/nct1008.c : nct1008_probe(), line=1634
[ 2.610155] nct1008_nct72 0-004c:
exit nct1008_probe, err=-11
[ 2.619907] nct1008_nct72 0-004c: success in disabling rail vdd_nct72
[ 2.627631] nct1008_nct72: probe of 0-004c failed with error -11
[ 2.635510] THERMAL EST start of therm_fan_est_probe.
[ 2.641899] THERMAL EST: found 2 subdevs
[ 2.647033] THERMAL EST name: thermal-fan-est.
[ 2.652692] THERMAL EST num_resources: 0
[ 2.657798] [THERMAL EST subdev 0]
[ 2.662381] THERMAL EST subdev name: CPU-therm
[ 2.667968] THERMAL EST index 0 coeffs 50
[ 2.673094] THERMAL EST index 1 coeffs 0
[ 2.678084] THERMAL EST index 2 coeffs 0
[ 2.683064] THERMAL EST index 3 coeffs 0
[ 2.687985] THERMAL EST index 4 coeffs 0
[ 2.692882] THERMAL EST index 5 coeffs 0
[ 2.697734] THERMAL EST index 6 coeffs 0
[ 2.702576] THERMAL EST index 7 coeffs 0
[ 2.707365] THERMAL EST index 8 coeffs 0
[ 2.712111] THERMAL EST index 9 coeffs 0
[ 2.716824] [THERMAL EST subdev 1]
[ 2.721003] THERMAL EST subdev name: GPU-therm
[ 2.726256] THERMAL EST index 0 coeffs 50
[ 2.731008] THERMAL EST index 1 coeffs 0
[ 2.735612] THERMAL EST index 2 coeffs 0
[ 2.740172] THERMAL EST index 3 coeffs 0
[ 2.744734] THERMAL EST index 4 coeffs 0
[ 2.749220] THERMAL EST index 5 coeffs 0
[ 2.753671] THERMAL EST index 6 coeffs 0
[ 2.758063] THERMAL EST index 7 coeffs 0
[ 2.762449] THERMAL EST index 8 coeffs 0
[ 2.766792] THERMAL EST index 9 coeffs 0
[ 2.771116] THERMAL EST index 0: trip_temp 0, hyst 0
[ 2.776496] THERMAL EST index 1: trip_temp 51000, hyst 15000
[ 2.782575] THERMAL EST index 2: trip_temp 61000, hyst 9000
[ 2.788529] THERMAL EST index 3: trip_temp 71000, hyst 9000
[ 2.794488] THERMAL EST index 4: trip_temp 82000, hyst 10000
[ 2.800533] THERMAL EST index 5: trip_temp 140000, hyst 0
[ 2.806356] THERMAL EST index 6: trip_temp 150000, hyst 0
[ 2.812169] THERMAL EST index 7: trip_temp 160000, hyst 0
[ 2.817972] THERMAL EST index 8: trip_temp 170000, hyst 0
[ 2.823800] THERMAL EST index 9: trip_temp 180000, hyst 0
[ 2.829607] THERMAL EST index 0: trip_temps_hyst 0
[ 2.834824] THERMAL EST index 1: trip_temps_hyst 36000
[ 2.840387] THERMAL EST index 2: trip_temps_hyst 51000
[ 2.845955] THERMAL EST index 3: trip_temps_hyst 52000
[ 2.851477] THERMAL EST index 4: trip_temps_hyst 61000
[ 2.856968] THERMAL EST index 5: trip_temps_hyst 62000
[ 2.862480] THERMAL EST index 6: trip_temps_hyst 71000
[ 2.867974] THERMAL EST index 7: trip_temps_hyst 72000
[ 2.873477] THERMAL EST index 8: trip_temps_hyst 82000
[ 2.878974] THERMAL EST index 9: trip_temps_hyst 140000
[ 2.884584] THERMAL EST index 10: trip_temps_hyst 140000
[ 2.890283] THERMAL EST index 11: trip_temps_hyst 150000
[ 2.895993] THERMAL EST index 12: trip_temps_hyst 150000
[ 2.901714] THERMAL EST index 13: trip_temps_hyst 160000
[ 2.907415] THERMAL EST index 14: trip_temps_hyst 160000
[ 2.913106] THERMAL EST index 15: trip_temps_hyst 170000
[ 2.918773] THERMAL EST index 16: trip_temps_hyst 170000
[ 2.924456] THERMAL EST index 17: trip_temps_hyst 180000
[ 2.930118] THERMAL EST index 18: trip_temps_hyst 180000
[ 2.935786] THERMAL EST index 19: trip_temps_hyst 0
[ 2.940992] THERMAL EST index 20: trip_temps_hyst 0
[ 2.946226] THERMAL EST init dev[0] temp hist to 25000
[ 2.951735] THERMAL EST init dev[1] temp hist to 25000
[ 2.957229] THERMAL EST cdev_type: pwm-fan.
[ 2.961808] THERMAL EST governor name: pid_thermal_gov
[ 2.967548] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est.46
[ 2.977742] THERMAL EST: thz register success.
[ 2.982864] THERMAL EST: end of probe, return err: 0
[ 2.988469] tegra_profiler: Branch: Dev
[ 2.992928] tegra_profiler: Version: 1.107
[ 2.997642] tegra_profiler: Samples version: 36
[ 3.002835] tegra_profiler: IO version: 20
[ 3.007589] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.012639] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.019980] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.025107] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.032549] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.037741] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.045341] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.050621] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.058361] tegra_profiler: auth: init
[ 3.063444] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[ 3.071440] tegra-sata tegra-sata.0: version 1.0
[ 3.071834] t210_sata_uphy_pll_init: sata uphy already enabled
[ 3.079450] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
[ 3.091023] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
[ 3.103002] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 3.111642] spi-tegra114 7000d400.spi: /spi@7000d400/prod-settings has no reg property
[ 3.122437] spi-tegra114 7000d400.spi: Static pin configuration used
[ 3.130464] spi_master spi0: cannot find modalias for /spi@7000d400/prod-settings
[ 3.140928] spi-tegra114 7000da00.spi: /spi@7000da00/prod-settings has no reg property
[ 3.152076] spi-tegra114 7000da00.spi: Static pin configuration used
[ 3.160307] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings
[ 3.171720] tun: Universal TUN/TAP device driver, 1.6
[ 3.178460] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 3.186537] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.194115] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.202188] PPP generic driver version 2.4.2
[ 3.208249] PPP BSD Compression module registered
[ 3.214662] PPP Deflate Compression module registered
[ 3.221406] PPP MPPE Compression module registered
[ 3.227842] NET: Registered protocol family 24
[ 3.233981] usbcore: registered new interface driver r8152
[ 3.241124] usbcore: registered new interface driver asix
[ 3.248147] usbcore: registered new interface driver ax88179_178a
[ 3.255795] usbcore: registered new interface driver cdc_ether
[ 3.263122] usbcore: registered new interface driver smsc95xx
[ 3.270270] usbcore: registered new interface driver net1080
[ 3.277306] usbcore: registered new interface driver cdc_subset
[ 3.284524] usbcore: registered new interface driver zaurus
[ 3.291369] usbcore: registered new interface driver cdc_ncm
[ 3.298196] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.306165] ehci-pci: EHCI PCI platform driver
[ 3.311928] tegra_xusb_read_usb_calib: usb_calib0 = 0x0a22a414
[ 3.320239] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210)
[ 3.327933] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (124416 Bytes)
[ 3.338254] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080040000 mapped 0xffffff8000339000 (124416 Bytes)
[ 3.338424] usbcore: registered new interface driver cdc_acm
[ 3.338427] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.338454] usbcore: registered new interface driver cdc_wdm
[ 3.338489] usbcore: registered new interface driver usb-storage
[ 3.338570] usbcore: registered new interface driver usbserial
[ 3.338595] usbcore: registered new interface driver ftdi_sio
[ 3.338617] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.338637] usbcore: registered new interface driver option
[ 3.338654] usbserial: USB Serial support registered for GSM modem (1-port)
[ 3.338674] usbcore: registered new interface driver pl2303
[ 3.338691] usbserial: USB Serial support registered for pl2303
[ 3.338714] usbcore: registered new interface driver nvshieldled
[ 3.338717] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
[ 3.338977] tegra USB phy - inst[0] platform info:
[ 3.338979] port_otg: yes
[ 3.338981] has_hostpc: yes
[ 3.338982] phy_interface: USB_PHY_INTF_UTMI
[ 3.338984] op_mode: TEGRA_USB_OPMODE_DEVICE
[ 3.338985] qc2_voltage: 0
[ 3.338987] vbus_pmu_irq: 0
[ 3.338988] charging: enabled
[ 3.338990] remote_wakeup: disabled
[ 3.343747] regulator_get() failed for (tegra-udc.0,usb_bat_chg), -19
[ 3.343753] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
[ 3.344111] usbcore: registered new interface driver xpad
[ 3.344136] usbcore: registered new interface driver usb_acecad
[ 3.344159] usbcore: registered new interface driver aiptek
[ 3.344181] usbcore: registered new interface driver gtco
[ 3.344207] usbcore: registered new interface driver hanwang
[ 3.344232] usbcore: registered new interface driver kbtab
[ 3.344256] usbcore: registered new interface driver wacom
[ 3.391229] otg state changed: SUSPEND → PERIPHERAL
[ 3.566389] tegra-xhci tegra-xhci: num_hsic_port 0
[ 3.574301] tegra-xhci tegra-xhci: Firmware timestamp: 2016-06-16 13:21:43 UTC, Version: 50.16 release, Falcon state 0x20
[ 3.587285] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[ 3.594133] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1
[ 3.604225] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
[ 3.611016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.618917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.628351] usb usb1: Product: Nvidia xHCI Host Controller
[ 3.635029] usb usb1: Manufacturer: Linux 3.10.96-tegra tegra-xhci
[ 3.642433] usb usb1: SerialNumber: tegra-xhci
[ 3.648332] xHCI xhci_add_endpoint called for root hub
[ 3.648339] xHCI xhci_check_bandwidth called for root hub
[ 3.648427] hub 1-0:1.0: USB hub found
[ 3.653406] hub 1-0:1.0: 5 ports detected
[ 3.691094] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1
[ 3.731243] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[ 3.738315] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
[ 3.748402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.756606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.766724] usb usb2: Product: Nvidia xHCI Host Controller
[ 3.773757] usb usb2: Manufacturer: Linux 3.10.96-tegra tegra-xhci
[ 3.781469] usb usb2: SerialNumber: tegra-xhci
[ 3.787427] Wake51 for irq=118
[ 3.787603] xHCI xhci_add_endpoint called for root hub
[ 3.787606] xHCI xhci_check_bandwidth called for root hub
[ 3.787684] hub 2-0:1.0: USB hub found
[ 3.787700] hub 2-0:1.0: 4 ports detected
[ 3.802429] Enabling wake51
[ 3.806858] Wake16 for irq=34
[ 3.811110] Enabling wake16
[ 3.815820] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0
[ 3.824245] i2c /dev entries driver
[ 3.830581] [OV5693]: probing v4l2 sensor.
[ 3.831299] Wake44 for irq=81
[ 3.831316] Wake40 for irq=53
[ 3.831318] Wake41 for irq=53
[ 3.831320] Wake42 for irq=53
[ 3.831321] Wake43 for irq=53
[ 3.856694] ov5693 6-0036: camera_common_regulator_get vana ERR: fffffffffffffdfb
[ 3.866492] i2c 6-0036: Driver ov5693 requests probe deferral
[ 3.873586] virtual_init
[ 3.877643] [IMX135] sensor driver loading
[ 3.882826] [imx132] sensor driver loading
[ 3.887957] [ar0261] sensor driver loading
[ 3.893066] ov7695 sensor driver loading
[ 3.897931] mt9m114 sensor driver loading
[ 3.902882] [ov10823] sensor driver loading
[ 3.908134] usbcore: registered new interface driver uvcvideo
[ 3.914826] USB Video Class driver (1.1.1)
[ 3.922234] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0
[ 3.932333] FAN: coudln’t get the regulator
[ 3.938864] tegra_aotag tegra-aotag.30: AOTAG probe started
[ 3.945709] tegra_aotag tegra-aotag.30: nominal ft – 105
[ 3.952210] tegra_aotag tegra-aotag.30: tall – 76
[ 3.958005] tegra_aotag tegra-aotag.30: tiddq – 1
[ 3.963807] tegra_aotag tegra-aotag.30: ten-count – 16
[ 3.970004] tegra_aotag tegra-aotag.30: tsample – 9
[ 3.975958] tegra_aotag tegra-aotag.30: pdiv – 8
[ 3.981674] tegra_aotag tegra-aotag.30: nominal cp – 25
[ 3.987999] tegra_aotag tegra-aotag.30: pdiv-ate – 8
[ 3.994086] tegra_aotag tegra-aotag.30: tsamp-ate – 39
[ 4.000292] tegra_aotag tegra-aotag.30: compensation A,B – 10632,-67490
[ 4.008003] tegra_aotag tegra-aotag.30: sensor found :ID 0, Name: aotag0
[ 4.015650] tegra_aotag tegra-aotag.30: reading fuse value for sensor 0
[ 4.023204] tegra_aotag tegra-aotag.30: base-cp:246 shifted-cp:1
[ 4.030120] tegra_aotag tegra-aotag.30: base-ft:4f7 shifted-ft:fffffffc
[ 4.037675] tegra_aotag tegra-aotag.30: actual_aotag_cp 255, ft 1030
[ 4.045024] tegra_aotag tegra-aotag.30: - Tsens calib value - 0x3e5dee5
[ 4.052604] tegra_aotag tegra-aotag.30: CPmask 1fff FTmask 3ffe000
[ 4.059735] tegra_aotag tegra-aotag.30: Tsense calib CP - 0x1ee5
[ 4.066706] tegra_aotag tegra-aotag.30: Tsense Actual CP d.36965
[ 4.071245] usb 1-3: new high-speed USB device number 3 using tegra-xhci
[ 4.081292] tegra_aotag tegra-aotag.30: Tsense calib FT - 0x1f2e
[ 4.088254] tegra_aotag tegra-aotag.30: Tsense Actual FT d.40462
[ 4.095132] tegra_aotag tegra-aotag.30: delta ts 3497, temp 775
[ 4.101956] tegra_aotag tegra-aotag.30: thermA-835, thermB–849
[ 4.108729] tegra_aotag tegra-aotag.30: Registering sensor 0
[ 4.115292] tegra_aotag tegra-aotag.30: Bound to TZ : ID 0
[ 4.121659] tegra_aotag tegra-aotag.30: shutdown temperature - 110
[ 4.128720] tegra_aotag tegra-aotag.30: AOTAG EN 60
[ 4.134482] tegra_aotag tegra-aotag.30: Probe done [SUCCESS]:0
[ 4.134486] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[ 4.134492] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.134497] usb 1-3: Product: USB2.0 Hub
[ 4.162035] md: raid0 personality registered for level 0
[ 4.168445] device-mapper: uevent: version 1.0.3
[ 4.174189] hub 1-3:1.0: USB hub found
[ 4.179029] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 4.189591] hub 1-3:1.0: 4 ports detected
[ 4.194960] Tegra210 cpuidle driver
[ 4.221684] sdhci: Secure Digital Host Controller Interface driver
[ 4.229018] sdhci: Copyright(c) Pierre Ossman
[ 4.234528] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.241681] mmc0: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[ 4.254637] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
[ 4.262792] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
[ 4.272661] Could not add sdhci-tegra.3 to power domain using device tree
[ 4.281435] sdhci-tegra sdhci-tegra.3: Speedo value 1965
[ 4.288111] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
[ 4.299841] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19
[ 4.307423] mmc0: no vqmmc regulator found
[ 4.313005] regulator_get() failed for (sdhci-tegra.3,vmmc), -19
[ 4.320492] mmc0: no vmmc regulator found
[ 4.361249] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
[ 4.371666] mmc1: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[ 4.385334] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
[ 4.393821] Could not add sdhci-tegra.1 to power domain using device tree
[ 4.402843] sdhci-tegra sdhci-tegra.1: Speedo value 1965
[ 4.409931] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
[ 4.425985] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19
[ 4.433756] mmc1: no vqmmc regulator found
[ 4.439498] regulator_get() failed for (sdhci-tegra.1,vmmc), -19
[ 4.447207] mmc1: no vmmc regulator found
[ 4.485715] mmc0: BKOPS_EN bit is not set
[ 4.491345] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
[ 4.503839] mmc2: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[ 4.517697] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
[ 4.526538] Could not add sdhci-tegra.0 to power domain using device tree
[ 4.535084] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci
[ 4.535609] sdhci-tegra sdhci-tegra.0: Speedo value 1965
[ 4.535616] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
[ 4.535686] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19
[ 4.535688] mmc2: no vqmmc regulator found
[ 4.535695] regulator_get() failed for (sdhci-tegra.0,vmmc), -19
[ 4.535697] mmc2: no vmmc regulator found
[ 4.571816] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
[ 4.571927] gpio wake35 for gpio=201
[ 4.584216] tegra-se tegra21-se: tegra_se_probe: complete
[ 4.584796] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.619992] usbcore: registered new interface driver usbhid
[ 4.627117] usbhid: USB HID core driver
[ 4.632504] tegra_bootloader_debug: Created tegra_bootloader directory
[ 4.640600] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
[ 4.654351] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
[ 4.655537] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff
[ 4.655542] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.655547] usb 2-1: Product: USB 10/100/1000 LAN
[ 4.655550] usb 2-1: Manufacturer: Nvidia
[ 4.655554] usb 2-1: SerialNumber: 000001000000
[ 4.673547] mmc0: tap value and tuning window after hw tuning completion …
[ 4.673553] mmc0: tuning_window[0]: 0xffffffff
[ 4.673557] mmc0: tuning_window[1]: 0xfffffc3f
[ 4.673561] mmc0: tuning_window[2]: 0xfff1ffff
[ 4.673565] mmc0: tuning_window[3]: 0x7ffffff
[ 4.673568] mmc0: tuning_window[4]: 0x0
[ 4.673572] mmc0: tuning_window[5]: 0x0
[ 4.673575] mmc0: tuning_window[6]: 0x0
[ 4.673578] mmc0: tuning_window[7]: 0x0
[ 4.673582] sdhci: Tap value: 61 | Trim value: 8
[ 4.673585] sdhci: SDMMC Interrupt status: 0x00040000
[ 4.674160] mmc0: switch to HS400 mode is successful
[ 4.678027] mmc0: new HS400 MMC card at address 0001
[ 4.678417] mmcblk0: mmc0:0001 016G32 14.6 GiB
[ 4.678613] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
[ 4.789666] nvadsp 702ef000.adsp: in probe()…
[ 4.790531] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[ 4.805696] nvadsp 702ef000.adsp: AMC/ARAM initialized.
[ 4.812041] nvadsp 702ef000.adsp: nvadsp_app_module_probe
[ 4.820461] tegra_throttle : init passed
[ 4.821575] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 4.832761] cpu-tegra: init EDP limit: 1224 MHz
[ 4.838740] pll_x: not ready for dynamic ramp to 921600000
[ 4.845274] pll_x: not ready for dynamic ramp to 921600000
[ 4.856744] soctherm: prog thresholds
[ 4.861425] soctherm: prog thresholds
[ 4.866080] soctherm: tz:2 not found, skip thresh prog
[ 4.872264] soctherm: prog thresholds
[ 4.876989] soctherm: skipping sensor 4 programming
[ 4.882972] soctherm: skipping sensor 5 programming
[ 4.888948] soctherm: trip_point temp 127500 forced to 127000
[ 4.903898] usbcore: registered new interface driver snd-usb-audio
[ 4.914363] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci
[ 5.021518] usb 1-3.3: new low-speed USB device number 4 using tegra-xhci
[ 5.026885] mmc1: tap value and tuning window after hw tuning completion …
[ 5.026891] mmc1: tuning_window[0]: 0xe3ffffff
[ 5.026895] mmc1: tuning_window[1]: 0x7fffffff
[ 5.026899] mmc1: tuning_window[2]: 0xfffffffe
[ 5.026903] mmc1: tuning_window[3]: 0x7fffffcf
[ 5.026907] mmc1: tuning_window[4]: 0x0
[ 5.026911] mmc1: tuning_window[5]: 0x0
[ 5.026914] mmc1: tuning_window[6]: 0x0
[ 5.026918] mmc1: tuning_window[7]: 0x0
[ 5.026921] sdhci: Tap value: 82 | Trim value: 8
[ 5.026924] sdhci: SDMMC Interrupt status: 0x00040000
[ 5.029548] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29)
[ 5.029554] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
[ 5.032186] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 5.145700] usb 1-3.3: New USB device found, idVendor=0461, idProduct=4e54
[ 5.153736] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.163365] usb 1-3.3: Product: Tiger USB Optical Mouse
[ 5.169807] usb 1-3.3: Manufacturer: PixArt
[ 5.175444] usb 1-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.189286] input: PixArt Tiger USB Optical Mouse as /devices/platform/tegra-xhci/usb1/1-3/1-3.3/1-3.3:1.0/input/input0
[ 5.202827] hid-generic 0003:0461:4E54.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Tiger USB Optical Mouse] on usb-tegra-xhci-3.3/input0
[ 5.265560] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x1b
[ 5.273752] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 5.281425] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x1b
[ 5.289652] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 5.297412] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x1b
[ 5.305719] usb 1-3.4: new low-speed USB device number 5 using tegra-xhci
[ 5.305787] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 5.305843] tegra-i2c 7000c000.i2c: arb lost in communicate to add 0x1b
[ 5.305921] tegra-i2c 7000c000.i2c: Un-recovered Arbitration lost
[ 5.305948] rt5659 0-001b: Device with ID register fdc93400 is not rt5659
[ 5.315040] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
[ 5.315744] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
[ 5.315931] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
[ 5.316181] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
[ 5.320727] OPE platform probe
[ 5.320894] OPE platform probe successful
[ 5.320928] OPE platform probe
[ 5.321107] OPE platform probe successful
[ 5.321343] tegra210_adsp_audio_platform_probe: platform probe started
[ 5.322619] tegra210-adsp adsp_audio.3: Default param-type to BYTE for mp3-dec1
[ 5.322872] tegra210-adsp adsp_audio.3: Default param-type to BYTE for spkprot
[ 5.323212] tegra210-adsp adsp_audio.3: Default param-type to BYTE for src
[ 5.323486] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aac-dec1
[ 5.323836] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aec
[ 5.325198] tegra210_adsp_audio_platform_probe probe successfull.
[ 5.325198] tegra-snd-t210ref-mobile-rt565x sound.27: Failed to get HP Det GPIO,should be handled by codec
[ 5.386737] tegra210-ape-admaif tegra210-admaif: ASoC: Failed to create codec debugfs directory
[ 5.388184] tegra210-adsp adsp_audio.3: ASoC: Failed to create platform debugfs directory
[ 5.420212] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF1 <-> ADMAIF1 mapping ok
[ 5.421413] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF2 <-> ADMAIF2 mapping ok
[ 5.422536] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF3 <-> ADMAIF3 mapping ok
[ 5.423645] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF4 <-> ADMAIF4 mapping ok
[ 5.424758] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF5 <-> ADMAIF5 mapping ok
[ 5.425877] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF6 <-> ADMAIF6 mapping ok
[ 5.427001] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF7 <-> ADMAIF7 mapping ok
[ 5.428119] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF8 <-> ADMAIF8 mapping ok
[ 5.429244] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF9 <-> ADMAIF9 mapping ok
[ 5.430356] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF10 <-> ADMAIF10 mapping ok
[ 5.481789] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE1 <-> ADSP PCM1 mapping ok
[ 5.482233] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE2 <-> ADSP PCM2 mapping ok
[ 5.482556] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
[ 5.482891] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
[ 5.493200] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO L Playback
[ 5.493207] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO L Playback → direct → x Headphone Jack
[ 5.493235] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO R Playback
[ 5.493239] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO R Playback → direct → x Headphone Jack
[ 5.493267] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x MICBIAS1
[ 5.493271] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack → direct → x MICBIAS1
[ 5.493298] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x IN1P
[ 5.493302] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack → direct → x IN1P
[ 5.493329] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x Mic Det Power
[ 5.493334] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack → direct → x Mic Det Power
[ 5.493361] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x SPO Playback
[ 5.493366] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x SPO Playback → direct → x Int Spk
[ 5.493393] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L1
[ 5.493397] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic → direct → x DMIC L1
[ 5.493424] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L2
[ 5.493428] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic → direct → x DMIC L2
[ 5.493454] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R1
[ 5.493458] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic → direct → x DMIC R1
[ 5.493485] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R2
[ 5.493489] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic → direct → x DMIC R2
[ 5.499569] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/platform/sound.27/sound/card1/input1
[ 5.502524] tegra-snd-t210ref-mobile-rt565x sound.27: codec-dai “dit-hifi” registered
[ 5.502529] tegra-snd-t210ref-mobile-rt565x sound.27: This is a dummy codec
[ 5.966800] GACT probability NOT on
[ 5.972484] Mirror/redirect action on
[ 5.978224] u32 classifier
[ 5.982949] Actions configured
[ 5.988307] Netfilter messages via NETLINK v0.30.
[ 5.995039] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.003354] ctnetlink v0.93: registering with nfnetlink.
[ 6.010763] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 6.019688] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 6.027727] xt_time: kernel timezone is -0000
[ 6.034071] ipip: IPv4 over IPv4 tunneling driver
[ 6.040630] usb 1-3.4: New USB device found, idVendor=413c, idProduct=2107
[ 6.040996] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.041144] arp_tables: (C) 2002 David S. Miller
[ 6.041194] TCP: cubic registered
[ 6.041198] Initializing XFRM netlink socket
[ 6.073701] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.084275] usb 1-3.4: Product: Dell USB Entry Keyboard
[ 6.091119] usb 1-3.4: Manufacturer: Dell
[ 6.096688] NET: Registered protocol family 10
[ 6.096977] usb 1-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 6.115390] mip6: Mobile IPv6
[ 6.119865] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.126890] sit: IPv6 over IPv4 tunneling driver
[ 6.127383] input: Dell Dell USB Entry Keyboard as /devices/platform/tegra-xhci/usb1/1-3/1-3.4/1-3.4:1.0/input/input2
[ 6.127621] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-tegra-xhci-3.4/input0
[ 6.163344] NET: Registered protocol family 17
[ 6.169438] NET: Registered protocol family 15
[ 6.175513] Bridge firewalling registered
[ 6.181061] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.188585] Bluetooth: HIDP socket layer initialized
[ 6.195132] NET: Registered protocol family 35
[ 6.201166] Key type dns_resolver registered
[ 6.206957] NET: Registered protocol family 41
[ 6.214635] Registering SWP/SWPB emulation handler
[ 6.244302] isp isp.0: initialized
[ 6.250543] isp isp.1: initialized
[ 6.255712] vdd_gpu: disabling
[ 6.260127] en-vdd-cam-1v2-alt: disabling
[ 6.265527] en-vdd-vcm-2v8: disabling
[ 6.270523] en-vdd-cam-1v2: disabling
[ 6.275500] usb-vbus3: disabling
[ 6.279983] usb-vbus1: disabling
[ 6.284414] vdd-disp-3v0: disabling
[ 6.289078] snsr_pm: disabling
[ 6.293293] aux-3v3: disabling
[ 6.297454] en-vdd-cam: disabling
[ 6.301858] en-vdd-sd: disabling
[ 6.310962] lcd-bl-en: disabling
[ 6.315133] max77620-gpio7: disabling
[ 6.331251] vdd-cpu-fixed: disabling
[ 6.335670] regulator-dummy: disabling
[ 6.340595] platform 7.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.350875] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.361101] platform c9.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.371549] platform ca.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.382143] platform cb.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.392985] platform cc.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.404034] platform cd.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.415319] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
[ 6.426545] platform ce.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.438312] [OV5693]: probing v4l2 sensor.
[ 6.444415] ov5693 6-0036: camera_common_regulator_get vana ERR: fffffffffffffdfb
[ 6.455829] i2c 6-0036: Driver ov5693 requests probe deferral
[ 6.464355] gpio wake24 for gpio=189
[ 6.470008] gpio wake27 for gpio=192
[ 6.475621] gpio wake25 for gpio=190
[ 6.481287] input: gpio-keys as /devices/platform/gpio-keys.47/input/input3
[ 6.490490] platform 7.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.502527] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.514301] tegra-rtc 7000e000.rtc: setting system clock to 2017-07-11 12:39:00 UTC (1499776740)
[ 6.514513] platform c9.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.514710] platform ca.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.514906] platform cb.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.515097] platform cc.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.515291] platform cd.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.515460] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
[ 6.515493] platform ce.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.515647] [OV5693]: probing v4l2 sensor.
[ 6.515800] ov5693 6-0036: camera_common_regulator_get vana ERR: fffffffffffffdfb
[ 6.515918] i2c 6-0036: Driver ov5693 requests probe deferral
[ 6.635213] vi vi: vi_probe: ++
[ 6.642476] vi vi: initialized
[ 6.647896] vi vi: parsing node /host1x/vi
[ 6.653971] vi vi: handling endpoint /host1x/vi/ports/port@0/endpoint
[ 6.662398] vi vi: handling endpoint /host1x/vi/ports/port@1/endpoint
[ 6.670726] vi vi: handling endpoint /host1x/vi/ports/port@2/endpoint
[ 6.679003] vi vi: handling endpoint /host1x/vi/ports/port@3/endpoint
[ 6.687188] vi vi: handling endpoint /host1x/vi/ports/port@4/endpoint
[ 6.695306] vi vi: handling endpoint /host1x/vi/ports/port@5/endpoint
[ 6.703332] vi vi: parsing node /host1x/i2c@546c0000/ov5693_c@36
[ 6.710860] vi vi: handling endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
[ 6.722523] platform 7.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.722981] [dram-timers] DRAM derating cdev registered.
[ 6.722989] Disable partitions left on by BL
[ 6.722992] sata
[ 6.723120] disb
[ 6.723143] Disabling clocks left on by bootloader:
[ 6.723144] audio2_dmic
[ 6.723148] audio1_dmic
[ 6.723151] audio0_dmic
[ 6.723154] audio_2x
[ 6.723159] audio
[ 6.723162] audio4
[ 6.723165] audio3
[ 6.723168] audio2
[ 6.723171] audio1
[ 6.723173] audio0
[ 6.723229] entropy
[ 6.723238] dsi2-fixed
[ 6.723240] dsi1-fixed
[ 6.723255] sdmmc4_ddr
[ 6.723263] sdmmc1_ddr
[ 6.723284] sor1_src
[ 6.723297] cclk_lp
[ 6.723913] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully
[ 6.724064] tune_cpu_trimmers: init soctherm cpu zone LOW
[ 6.724168] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
[ 6.724235] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered
[ 6.724493] Tegra CPU DFLL is initialized with use_dfll = 1
[ 6.724612] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator
[ 6.724840] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator
[ 6.724955] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator
[ 6.725430] CPU rate: 921 MHz
[ 6.725693] last reset is due to software reset
[ 6.725695] KERNEL: PMC reset status reg: 0x3
[ 6.726309] tegra_actmon.emc: Completed initialization (0)
[ 6.726683] tegra_actmon.avp: Completed initialization (0)
[ 6.888491] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.897986] platform c9.regulator: Driver reg-fixed-sync-voltage requests probe deferral
[ 6.901569] tegra dvfs: tegra sysfs cap interface is initialized
[ 6.901622] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[ 6.901891] Set maximum possible CPU frequency 1734000
[ 6.901927] ALSA device list:
[ 6.901929] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[ 6.901931] #1: tegra-snd-t210ref-mobile-rt565x
[ 6.943908] platform ca.regulator: Driver reg-fixed-sync-v