What would happen if GMSL camera fails during runtime?

Hi,

This is a question on the behaviour of the PX2 hardware.

There are 12 GMSL cameras connected to the ports A, B and C. If one or more cameras were to fail while the PX2 is doing image acquisition on the cameras, will the PX2 still be able to continue to capture images from the remaining working cameras?

We noted that it is recommended to power down the PX2 before plugging in/out GMSL cameras.
What would happen to the PX2 if cameras are unplugged or plugged in while the unit is still switched on?

Dear chee0007,

There are 12 GMSL cameras connected to the ports A, B and C. If one or more cameras were to fail while the PX2 is doing image acquisition on the cameras, will the PX2 still be able to continue to capture images from the remaining working cameras?
->I think maybe yes, because recording tool save each camera image separately.

We noted that it is recommended to power down the PX2 before plugging in/out GMSL cameras.
What would happen to the PX2 if cameras are unplugged or plugged in while the unit is still switched on?
→ If so, maybe the camera will probably get damaged.