I’m trying to get the tc358840 driver running on a JTX1 carried by a j130 auvidea board. For that I tried two solutions, both with no success :
-
building from this repository : [url]https://github.com/InES-HPMM/linux-l4t[/url] and following this guide : [url]https://github.com/InES-HPMM/linux-l4t/wiki/customKernelCompilation[/url].
I’ve succeeded to build the image and dtbs but it appears that tegra210-jetson-tx1-p2597-2180-a01-devkit-hdmi-4k.dtb is missing for some reason and after replacing the files using the serial console, the jtx1 crashes at boot. -
Using auvidea tc358840 patch (jan. 2018 v2.3) from their website : [url]https://auvidea.com/firmware/[/url]. The compressed file seems to be containing a built kernel (with image, dtbs, modules and some bootfiles as well as a tar of the kernel, probably here to serve as the header). Since there is no informations regarding how to install it and I have not received words from auvidea, I instinctively replaced the matching files in the jetpack folder (64_TX1/Linux_for_tegra_tx1/…) with those, then flashed. This time I get no feedback on screen.
Does someone succeeded to perform either of these solutions and could provide some guidance?
Thank you