Custom gmsl camera setup
Hi, I have a MOPAR 68144068AC camera with the same FAKRA connector as the DRIVE PX2 supported cameras. Can I make it work with driveworks? With the sample_camera_gmsl most camera types give a "cannot connect to camera" error, but 2 give different errors: - ar0231-rccb-svc : "sensor does not support requested output types" - ar0144 : gives a segmentation fault after tell "CameraGMSL: required FPS = 45, resolution = 1280x804" I also tried with the custom camera sample but i dont know what parameters set into the camera.cfg Any ideas? Thanks, Francesco
Hi,
I have a MOPAR 68144068AC camera with the same FAKRA connector as the DRIVE PX2 supported cameras.
Can I make it work with driveworks?
With the sample_camera_gmsl most camera types give a "cannot connect to camera" error, but 2 give different errors:
- ar0231-rccb-svc : "sensor does not support requested output types"
- ar0144 : gives a segmentation fault after tell "CameraGMSL: required FPS = 45, resolution = 1280x804"

I also tried with the custom camera sample but i dont know what parameters set into the camera.cfg

Any ideas?

Thanks,
Francesco

#1
Posted 02/13/2018 06:06 PM   
Dear ceccocats, Could you please refer to below links for your topic? http://docs.nvidia.com/drive/nvvib_docs/index.html#page/NVIDIA%2520DRIVE%2520Linux%2520SDK%2520Development%2520Guide%2FConfiguration%2Fcamera_setup_dpx.html%23 And page 12(camera-type part) in DriveWorks DevGuide.pdf. Thanks.
Dear ceccocats,

Could you please refer to below links for your topic?

http://docs.nvidia.com/drive/nvvib_docs/index.html#page/NVIDIA%2520DRIVE%2520Linux%2520SDK%2520Development%2520Guide%2FConfiguration%2Fcamera_setup_dpx.html%23
And page 12(camera-type part) in DriveWorks DevGuide.pdf. Thanks.

#2
Posted 02/19/2018 01:55 AM   
Scroll To Top

Add Reply