TX2 CSI2: interpreting the VI errors

Hi All,

I went through below post to understand how to interpret all the errors.
This has only partial information. Please can some one provide me complete details of all VI errors.
It will help me to debug the TX2 CSI or Camera driver accordingly.
https://devtalk.nvidia.com/default/topic/1023414/jetson-tx2/payload-definition-for-csimux-and-chansel-vinotify-messages/

Here is the error sample:
25.644315: rtos_queue_peek_from_isr_failed: tstamp:13633602023 queue:0x0b4a3c58
kworker/4:0-3464 [004] …1 425.644322: rtcpu_start: tstamp:13633804183
kworker/4:0-3464 [004] …1 425.748249: rtcpu_vinotify_handle_msg: tstamp:13636505031 tag:CSIMUX_STREAM channel:0xff frame:0 vi_tstamp:751602722 data:0x00010000
kworker/4:0-3464 [004] …1 425.748251: rtcpu_vinotify_handle_msg: tstamp:13637188858 tag:CHANSEL_PXL_SOF channel:0x00 frame:0 vi_tstamp:752286219 data:0x00000001
kworker/4:0-3464 [004] …1 425.748252: rtcpu_vinotify_handle_msg: tstamp:13637189008 tag:ATOMP_FS channel:0x00 frame:0 vi_tstamp:752286229 data:0x00000000
kworker/4:0-3464 [004] …1 425.748252: rtcpu_vinotify_handle_msg: tstamp:13637189112 tag:CHANSEL_FAULT channel:0x00 frame:0 vi_tstamp:752286313 data:0x00000200
kworker/4:0-3464 [004] …1 425.748253: rtcpu_vinotify_handle_msg: tstamp:13637189605 tag:CHANSEL_LOAD_FRAMED channel:0x10 frame:0 vi_tstamp:752287354 data:0x08000000
kworker/4:0-3464 [004] …1 425.748254: rtcpu_vinotify_handle_msg: tstamp:13637190782 tag:CHANSEL_FAULT_FE channel:0x10 frame:0 vi_tstamp:752288314 data:0x00000001
kworker/4:0-3464 [004] …1 425.748255: rtcpu_vinotify_handle_msg: tstamp:13637190923 tag:ATOMP_FE channel:0x00 frame:0 vi_tstamp:752288317 data:0x00000000

The log shows PIXEL_SHORT_LINE

kworker/4:0-3464 [004] ...1 425.748252: rtcpu_vinotify_handle_msg: tstamp:13637189112 tag:CHANSEL_FAULT channel:0x00 frame:0 vi_tstamp:752286313 data:0x00000200

External Media

@ShaneCCC,

That is really useful data. Glad you shared it here, which might help many :)

I am closing this thread, as I got what I am looking for :)

Thanks

Hi ShanceCCC,

That image that you shared is very useful to debug capture issues, because these notifications are not found in TRM.

Is the full document available in NVIDIA Embedded Download Center?

Thanks,
-Enrique

ShanceCCC,

Could you provide the CHANSEL Notifications document?

It would be very useful for us to detect issues on sensor drivers.

-Enrique

Please have a check below link.

https://elinux.org/Jetson_TX2_Camera_BringUp