Hi
we have made a custom board using Tegra TK1. We have just done memory characterization and trying to flash L4T.
we have successfully reached till the step where log shows Boot downloaded successfully but getting an error at system.img (which is the last step during flashing)
error: failed flashing Ardbeg (seems USB problem according to related questions on the forum)
Now my question is that when we power up our board, it always remains in force recovery mode, even we do not press the force recovery button. is it a normal thing or there is some problem with the board.
Do you have any idea?
Thank you
RCM communication completed
auxInfo->NCTBoardInfo->proc_board_id is 375
auxInfo->NCTBoardInfo->proc_sku is 0
auxInfo->NCTBoardInfo->proc_fab is 3
BCT sent successfully
sending file: tegra124-jetson_tk1-pm375-000-c00-00.dtb
I have just changed DDR. I created a config file by creating its param file using memory characterization.
I updated the config file name in jetson-tk1.conf in Linux for Tegra directory.
These are the only things that are changed from the original procedure and board.
The part number for the DDR I am using is
MT41K256M16TW-107 AUT:P
we have also tried flashing using HUB but no still no luck. If you have any suggestion, please let us know.
Thanks
actually, I rename my BCT with this name instead of changing in jetson-tk1.conf
but I also tried by replacing my BCT name in jetson-tk1.conf, I am getting the same results.
Hi!
Sir, I want to tell you that we have also the different part number for eMMC.
RP-SEMC32DA1
it is of 32GB, do we need some changes in uboot for this or it required any additional test for eMMC as we do for SDRAMs ?
and following the same thing on jetson kit, I was successful. my custom board does not have ethernet so I may not be able to follow jetpack documentation.