The EDP number on the document you refer to is correct for EDP, but you will rarely ever see EDP when using the system. This would assume a completely fully loaded system in all worse case scenarios. What is more accurate for typical load would be the TDP, Thermal Design Power of the system, which you could expect to be < 600 Watt for the DRIVE AGX Pegasus DevKit.
If you check the Hyperion installation documentation there is some details there on how to install into a vehicle and the battery requirements and config needed. It is mentioned to power the entire hyperion system that 840W is required.
It seems that the file you have tried to download is no longer available or the URL used is no longer valid. Please refer back to the product page and follow the links to get the latest downloadable version."
is poped up, could you check the URL?
And I have another question.
First,
I want to know power to use DRIVE AGX Xavier.
Second,
Do you heard a power problem using Driveworks AGX Xavier on a Car?
I make a system on my car.
The power system is as follows.
From Car out 12V Power into Converter 12V-220V.
From Converter out 220V Power into Xavier Power supply.
Please go here and find “DRIVE Hyperion Hardware Installation Guide (PDF)”
This document describes all that is needed to install our hyperion kit(which includes an AGX system, rack, sensors, and power distribution) into a vehicle. It will be quite helpful for you to answer those questions.