Does jetson TX2 support intel i350-t4?

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Hello,

I´m working with Gige camera.

That camera can work in single or dual Gige. To accelerate the acquisition, I need a second ethernet port. I would like to use the intel i350-t4. Does jetson TX2 support that PCI ?

ps : I know that this one has 4 ethernet port and not 2.

Thank you,
Regards

2

Hi nolann.laine,

We tried i350-i4 on our board and the driver has no problem. However, there are some hardware issue similar to below thread. You may need to tape some pin here.

https://devtalk.nvidia.com/default/topic/1050167/jetson-nano/nano-won-t-boot-with-intel-8260ngw-mini-pcie-wifi-card-/post/5376681/#5376681

3

Great, many thanks for your answer !

On that post, (https://devtalk.nvidia.com/default/topic/1050167/jetson-nano/nano-won-t-boot-with-intel-8260ngw-mini-pcie-wifi-card-/post/5376681/#5376681) it is not a PCI ethernet card.

Can you share me which port did you mask ?

Moreother, is there any PCI ethernet card withtout any hardware issues ?

Thank you !
regards

4

Hi,

The hardware problem here is the Intel card pull down the i2c lines and cause the system issue on our board. Better getting the pinout from Intel to know which one needs to be tapped.

Moreother, is there any PCI ethernet card withtout any hardware issues ?
What is the requirement you need? Do you need 10G or 1000M is sufficient?

5

Ok great. Thank you

Only 1000M is sufficient, with 4 ethernet port

Regards

6

Hi,

Sorry that my card does not have 4 port… I will let other forum user to share their experience.