Hello all.
New to the forums, sorry if this is not the proper place to post this.
I have a question, I have built and new workstation for a friend of mine and am wanting to test and tweak it to it’s maximum.
Here are the basic specs:
1 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
1 x CORSAIR Hydro Series H110 Water Cooler
1 x Silverstone PCI Express Card with USB 3.0 Internal Connector Model SST-EC01-P
1 x AFT PRO-57U All-in-one USB 3.0 5.25" Media Card Reader
1 x ASUS P9X79 DELUXE LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
1 x Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
1 x SILVERSTONE ST1500 1500W ATX 12V 2.3 & EPS 12V SLI Ready 80 PLUS SILVER Certified Active PFC Power Supply
1 x Western Digital WD VelociRaptor WD1000DHTZ 1TB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x Logitech G710 920-003887 USB 2.0 Wired Gaming Plus Mechanical Keyboard
1 x Logitech G500 10 Buttons Dual-mode Scroll Wheel USB Wired Laser Gaming Mouse
1 x ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
4 x 16 64gb Kingston HyperX 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 Desktop Memory 1.35V Low Voltage XMP Model
1 x Fractal Design Define XL R2 FD-CA-DEF-XL-R2-TI Titanium Grey Steel ATX Full Tower Computer Case
2 x ASUS PB Series PB278Q 27" 5ms (GTG) WQHD HDMI Widescreen LED Monitor
1 x Microsoft Windows 7 Professional SP1 64-bit
1 x NVIDIA TESLA K20 (900-22081-2220-000) GK110 5GB 320-bit GDDR5 PCI Express 2.0 x16 Workstation Video Card
1 x PNY VCQK5000-PB NVIDIA Quadro K5000 4GB256-bit PCI Express 2.0 x 16 HDCP Ready Workstation video card
My question is, this system will be used as a rendering and animation station with 3ds max and Adobe software. I have Maximus drivers installed and the system itself is very stable overclocked at 4.4, what I am wanting to know is there a really good benchmark tool to test the two video cards are performing the best they can and together.
I have ran some test renderings in 3dsmax with the Maximus utility open and when rendering or running SPECviewperf I see no activity in the Tesla section.
Thanks in advance for any advice or tips.
Chris