Same problem here, similar setup (os, cuds, xcode) on a MBP retina.
Built deviceConfig by cd:ing to its source dir and running make there.
Ran successfully, so this feels more like a build problem than a runtime problem IMHO.
Tried to paste the results but got stopped by some rule checker, trying to post without
results to see if that works better.
I also noted that prior to the error posted above there are a number of warnings about switch statements leaving some enumeration values “unhandled”:
Looking at the source near this warning it seems that the value of __CUDA_API_VERSION is NOT >=0x4000 which is surprising. I expected it to be 0x5050 for Cuda 5.5 How can I check the actual value and where is that set?
Trying to post again with the results of running deviceConfig as mentioned in the previous post:
./deviceQuery Starting…
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: “GeForce GT 750M”
CUDA Driver Version / Runtime Version 5.5 / 5.5
CUDA Capability Major/Minor version number: 3.0
Total amount of global memory: 2048 MBytes (2147024896 bytes)
( 2) Multiprocessors, (192) CUDA Cores/MP: 384 CUDA Cores
GPU Clock rate: 926 MHz (0.93 GHz)
Memory Clock rate: 2508 Mhz
Memory Bus Width: 128-bit
L2 Cache Size: 262144 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536, 65536), 3D=(4096, 4096, 4096)
Maximum Layered 1D Texture Size, (num) layers 1D=(16384), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(16384, 16384), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 1 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Disabled
Device supports Unified Addressing (UVA): Yes
Device PCI Bus ID / PCI location ID: 1 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 5.5, CUDA Runtime Version = 5.5, NumDevs = 1, Device0 = GeForce GT 750M
Result = PASS
I installed nsight Cuda and cuda drive and gcc when i was trying to run samples such as multiplication , I get this error and failure run
please can some one help me how to solve this problem .
Best regards
**** Incremental Build of configuration Debug for project matrixMulCUBLAS ****