I’ve what I believe is a system conflict with my RAM (3GB in total: 512+512MB in bank 0 slot 1&2 + 1+1GB in bank 1 slot 3&4 - dual channel ddr 400) and my GT220 card.
- The 3GB is ok by itself, memtest run fine, I can boot and use VESA driver.
- If I install Nvidia driver X fails at boot with error:
[ 34.947] (EE) NVIDIA(GPU-0): Failed to initialize DMA.
- If I remove 512MB from 1st slot the driver start fine and work as a charm
How can I better debug the issue? I’ve latest BIOS, Xubuntu 13.10 updated with latest 3.11 kernel (same issue with 3.10).
Here’s the logs, both when it fails (with 3GB RAM) and when it works (w/ 2.5GB RAM):
With 3GB RAM (fails with DMA issue)
Xorg Logs:
[ 19.294]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 19.294] X Protocol Version 11, Revision 0
[ 19.294] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 19.294] Current Operating System: Linux drake 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64
[ 19.294] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=9cc30525-c462-4711-8106-cfb3e153eac2 ro quiet splash
[ 19.295] Build Date: 15 October 2013 09:23:37AM
[ 19.295] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 19.295] Current version of pixman: 0.30.2
[ 19.295] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.295] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.295] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 10 09:31:31 2013
[ 19.307] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.307] (==) No Layout section. Using the first Screen section.
[ 19.307] (==) No screen section available. Using defaults.
[ 19.307] (**) |-->Screen "Default Screen Section" (0)
[ 19.307] (**) | |-->Monitor "<default monitor>"
[ 19.307] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.307] (==) Automatically adding devices
[ 19.307] (==) Automatically enabling devices
[ 19.307] (==) Automatically adding GPU devices
[ 19.307] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.307] Entry deleted from font path.
[ 19.307] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19.307] Entry deleted from font path.
[ 19.307] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.307] Entry deleted from font path.
[ 19.307] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19.307] Entry deleted from font path.
[ 19.307] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.307] Entry deleted from font path.
[ 19.307] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 19.307] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 19.307] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.307] (II) Loader magic: 0x7f332ffe6d20
[ 19.307] (II) Module ABI versions:
[ 19.308] X.Org ANSI C Emulation: 0.4
[ 19.308] X.Org Video Driver: 14.1
[ 19.308] X.Org XInput driver : 19.1
[ 19.308] X.Org Server Extension : 7.0
[ 19.308] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.309] (--) PCI:*(0:1:0:0) 10de:0a20:1462:1910 rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 19.309] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.309] Initializing built-in extension Generic Event Extension
[ 19.309] Initializing built-in extension SHAPE
[ 19.309] Initializing built-in extension MIT-SHM
[ 19.309] Initializing built-in extension XInputExtension
[ 19.309] Initializing built-in extension XTEST
[ 19.309] Initializing built-in extension BIG-REQUESTS
[ 19.309] Initializing built-in extension SYNC
[ 19.309] Initializing built-in extension XKEYBOARD
[ 19.309] Initializing built-in extension XC-MISC
[ 19.309] Initializing built-in extension SECURITY
[ 19.309] Initializing built-in extension XINERAMA
[ 19.309] Initializing built-in extension XFIXES
[ 19.309] Initializing built-in extension RENDER
[ 19.309] Initializing built-in extension RANDR
[ 19.309] Initializing built-in extension COMPOSITE
[ 19.309] Initializing built-in extension DAMAGE
[ 19.309] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.309] Initializing built-in extension DOUBLE-BUFFER
[ 19.309] Initializing built-in extension RECORD
[ 19.309] Initializing built-in extension DPMS
[ 19.309] Initializing built-in extension X-Resource
[ 19.309] Initializing built-in extension XVideo
[ 19.309] Initializing built-in extension XVideo-MotionCompensation
[ 19.309] Initializing built-in extension SELinux
[ 19.309] Initializing built-in extension XFree86-VidModeExtension
[ 19.309] Initializing built-in extension XFree86-DGA
[ 19.309] Initializing built-in extension XFree86-DRI
[ 19.309] Initializing built-in extension DRI2
[ 19.309] (II) "glx" will be loaded by default.
[ 19.309] (WW) "xmir" is not to be loaded by default. Skipping.
[ 19.309] (II) LoadModule: "dri2"
[ 19.310] (II) Module "dri2" already built-in
[ 19.310] (II) LoadModule: "glamoregl"
[ 19.373] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 19.619] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[ 19.619] (II) UnloadModule: "glamoregl"
[ 19.619] (II) Unloading glamoregl
[ 19.620] (EE) Failed to load module "glamoregl" (loader failed, 7)
[ 19.620] (II) LoadModule: "glx"
[ 19.620] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 19.849] (II) Module glx: vendor="NVIDIA Corporation"
[ 19.849] compiled for 4.0.2, module version = 1.0.0
[ 19.849] Module class: X.Org Server Extension
[ 19.849] (II) NVIDIA GLX Module 319.60 Wed Sep 25 14:24:11 PDT 2013
[ 19.849] Loading extension GLX
[ 19.849] (==) Matched nvidia as autoconfigured driver 0
[ 19.849] (==) Matched nouveau as autoconfigured driver 1
[ 19.849] (==) Matched nvidia as autoconfigured driver 2
[ 19.849] (==) Matched nouveau as autoconfigured driver 3
[ 19.849] (==) Matched vesa as autoconfigured driver 4
[ 19.849] (==) Matched modesetting as autoconfigured driver 5
[ 19.849] (==) Matched fbdev as autoconfigured driver 6
[ 19.849] (==) Assigned the driver to the xf86ConfigLayout
[ 19.849] (II) LoadModule: "nvidia"
[ 19.849] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 19.850] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19.850] compiled for 4.0.2, module version = 1.0.0
[ 19.850] Module class: X.Org Video Driver
[ 19.850] (II) LoadModule: "nouveau"
[ 19.850] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 19.948] (II) Module nouveau: vendor="X.Org Foundation"
[ 19.948] compiled for 1.14.2.901, module version = 1.0.9
[ 19.948] Module class: X.Org Video Driver
[ 19.948] ABI class: X.Org Video Driver, version 14.1
[ 19.948] (II) LoadModule: "vesa"
[ 19.948] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 19.948] (II) Module vesa: vendor="X.Org Foundation"
[ 19.948] compiled for 1.14.1, module version = 2.3.2
[ 19.948] Module class: X.Org Video Driver
[ 19.948] ABI class: X.Org Video Driver, version 14.1
[ 19.948] (II) LoadModule: "modesetting"
[ 19.949] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 19.949] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.949] compiled for 1.14.1, module version = 0.8.0
[ 19.949] Module class: X.Org Video Driver
[ 19.949] ABI class: X.Org Video Driver, version 14.1
[ 19.949] (II) LoadModule: "fbdev"
[ 19.949] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 19.949] (II) Module fbdev: vendor="X.Org Foundation"
[ 19.949] compiled for 1.14.1, module version = 0.4.3
[ 19.949] Module class: X.Org Video Driver
[ 19.949] ABI class: X.Org Video Driver, version 14.1
[ 19.949] (II) NVIDIA dlloader X Driver 319.60 Wed Sep 25 14:04:14 PDT 2013
[ 19.949] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19.949] (II) NOUVEAU driver Date: Wed Jul 31 10:51:03 2013 +1000
[ 19.949] (II) NOUVEAU driver for NVIDIA chipset families :
[ 19.949] RIVA TNT (NV04)
[ 19.949] RIVA TNT2 (NV05)
[ 19.949] GeForce 256 (NV10)
[ 19.949] GeForce 2 (NV11, NV15)
[ 19.949] GeForce 4MX (NV17, NV18)
[ 19.949] GeForce 3 (NV20)
[ 19.949] GeForce 4Ti (NV25, NV28)
[ 19.949] GeForce FX (NV3x)
[ 19.949] GeForce 6 (NV4x)
[ 19.949] GeForce 7 (G7x)
[ 19.949] GeForce 8 (G8x)
[ 19.949] GeForce GTX 200 (NVA0)
[ 19.949] GeForce GTX 400 (NVC0)
[ 19.949] (II) VESA: driver for VESA chipsets: vesa
[ 19.949] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.949] (II) FBDEV: driver for framebuffer: fbdev
[ 19.949] (++) using VT number 7
[ 19.951] (II) Loading sub module "fb"
[ 19.951] (II) LoadModule: "fb"
[ 19.952] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.952] (II) Module fb: vendor="X.Org Foundation"
[ 19.952] compiled for 1.14.3, module version = 1.0.0
[ 19.952] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.952] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 19.952] (II) Loading sub module "wfb"
[ 19.952] (II) LoadModule: "wfb"
[ 19.952] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19.952] (II) Module wfb: vendor="X.Org Foundation"
[ 19.952] compiled for 1.14.3, module version = 1.0.0
[ 19.952] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.952] (II) Loading sub module "shadow"
[ 19.952] (II) LoadModule: "shadow"
[ 19.952] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 19.952] (II) Module shadow: vendor="X.Org Foundation"
[ 19.952] compiled for 1.14.3, module version = 1.1.0
[ 19.952] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.952] (II) Loading sub module "ramdac"
[ 19.952] (II) LoadModule: "ramdac"
[ 19.952] (II) Module "ramdac" already built-in
[ 19.953] (WW) Falling back to old probe method for vesa
[ 19.953] (WW) Falling back to old probe method for modesetting
[ 19.953] (WW) Falling back to old probe method for fbdev
[ 19.953] (II) Loading sub module "fbdevhw"
[ 19.953] (II) LoadModule: "fbdevhw"
[ 19.953] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19.953] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.953] compiled for 1.14.3, module version = 0.0.2
[ 19.953] ABI class: X.Org Video Driver, version 14.1
[ 19.953] (EE) open /dev/fb0: No such file or directory
[ 19.953] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.953] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 19.953] (==) NVIDIA(0): RGB weight 888
[ 19.953] (==) NVIDIA(0): Default visual is TrueColor
[ 19.953] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.953] (**) NVIDIA(0): Enabling 2D acceleration
[ 28.910] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 28.910] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 28.914] (II) NVIDIA(0): NVIDIA GPU GeForce GT 220 (GT216) at PCI:1:0:0 (GPU-0)
[ 28.914] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 28.914] (--) NVIDIA(0): VideoBIOS: 70.16.1d.00.03
[ 28.914] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 31.916] (--) NVIDIA(0): Valid display device(s) on GeForce GT 220 at PCI:1:0:0
[ 31.916] (--) NVIDIA(0): CRT-0
[ 31.916] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (boot, connected)
[ 31.916] (--) NVIDIA(0): DFP-0
[ 31.916] (--) NVIDIA(0): DFP-1
[ 31.916] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.916] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 31.916] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 31.916] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 31.916] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 31.916] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 31.916] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.916] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 31.916] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.920] (==) NVIDIA(0):
[ 31.920] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 31.920] (==) NVIDIA(0): will be used as the requested mode.
[ 31.920] (==) NVIDIA(0):
[ 31.920] (II) NVIDIA(0): Validated MetaModes:
[ 31.920] (II) NVIDIA(0): "CRT-1:nvidia-auto-select{}"
[ 31.920] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 31.944] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 31.944] (--) NVIDIA(0): option
[ 31.944] (II) UnloadModule: "nouveau"
[ 31.944] (II) Unloading nouveau
[ 31.944] (II) UnloadModule: "vesa"
[ 31.944] (II) Unloading vesa
[ 31.944] (II) UnloadModule: "modesetting"
[ 31.944] (II) Unloading modesetting
[ 31.944] (II) UnloadModule: "fbdev"
[ 31.944] (II) Unloading fbdev
[ 31.944] (II) UnloadSubModule: "fbdevhw"
[ 31.944] (II) Unloading fbdevhw
[ 31.944] (--) Depth 24 pixmap format is 32 bpp
[ 31.945] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 34.947] (EE) NVIDIA(GPU-0): Failed to initialize DMA.
[ 34.947] (EE) *** Aborting ***
[ 59.082] (EE)
Fatal server error:
[ 59.082] (EE) AddScreen/ScreenInit failed for driver 0
[ 59.082] (EE)
[ 59.082] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 59.082] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 59.082] (EE)
[ 59.083] (EE) Server terminated with error (1). Closing log file.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-13-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=9cc30525-c462-4711-8106-cfb3e153eac2 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: 939S56-M/939S56-M, BIOS P1.40 11/30/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 2GB, type UC
[ 0.000000] total RAM covered: 3072M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffaffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ffaffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35ef0000-0x36f6ffff]
[ 0.000000] ACPI: RSDP 00000000000f9d10 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffb0000 00034 (v01 A M I OEMRSDT 11000530 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 A M I OEMFACP 11000530 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffb0430 0395B (v01 93956 93956131 00000131 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffc0000 00040
[ 0.000000] ACPI: APIC 000000007ffb0390 0005C (v01 A M I OEMAPIC 11000530 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffb03f0 0003C (v01 A M I OEMMCFG 11000530 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ffc0040 00056 (v01 A M I AMI_OEM 11000530 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013c600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffaffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 786254
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 520112 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffb0000-0x7ffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffc0000-0x7ffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fff0000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86720 r8192 d23872 u1048576
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773946
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=9cc30525-c462-4711-8106-cfb3e153eac2 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 8e1a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 74000000
[ 0.000000] PM: Registered nosave memory: [mem 0x74000000-0x77ffffff]
[ 0.000000] Memory: 2930568K/3145016K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 214448K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2400.215 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.43 BogoMIPS (lpj=9600860)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008051] Security Framework initialized
[ 0.008086] AppArmor: AppArmor initialized
[ 0.008088] Yama: becoming mindful.
[ 0.008553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015182] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017205] Mount-cache hash table entries: 256
[ 0.017554] Initializing cgroup subsys memory
[ 0.017586] Initializing cgroup subsys devices
[ 0.017588] Initializing cgroup subsys freezer
[ 0.017591] Initializing cgroup subsys blkio
[ 0.017593] Initializing cgroup subsys perf_event
[ 0.017597] Initializing cgroup subsys hugetlb
[ 0.017624] tseg: 0000000000
[ 0.017634] CPU: Physical Processor ID: 0
[ 0.017635] CPU: Processor Core ID: 0
[ 0.017638] mce: CPU supports 5 MCE banks
[ 0.017651] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.017651] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.017651] tlb_flushall_shift: 4
[ 0.017787] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[ 0.019658] ACPI: Core revision 20130517
[ 0.021271] ACPI: All ACPI Tables successfully acquired
[ 0.021377] ftrace: allocating 27803 entries in 109 pages
[ 0.032510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072865] smpboot: CPU0: Dual Core AMD Opteron(tm) Processor 180 (fam: 0f, model: 23, stepping: 02)
[ 0.076000] Performance Events: AMD PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 48
[ 0.076000] ... generic registers: 4
[ 0.076000] ... value mask: 0000ffffffffffff
[ 0.076000] ... max period: 00007fffffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000000000f
[ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] smpboot: Booting Node 0, Processors #1 OK
[ 0.164080] Brought up 2 CPUs
[ 0.164083] smpboot: Total of 2 processors activated (9600.90 BogoMIPS)
[ 0.164931] devtmpfs: initialized
[ 0.165793] EVM: security.selinux
[ 0.165795] EVM: security.SMACK64
[ 0.165797] EVM: security.capability
[ 0.165848] PM: Registering ACPI NVS region [mem 0x7ffc0000-0x7ffeffff] (196608 bytes)
[ 0.168503] regulator-dummy: no parameters
[ 0.168537] RTC time: 8:36:03, date: 11/10/13
[ 0.168591] NET: Registered protocol family 16
[ 0.168742] node 0 link 0: io port [1000, ffffff]
[ 0.168746] TOM: 0000000080000000 aka 2048M
[ 0.168748] node 0 link 0: mmio [e0000000, efffffff]
[ 0.168752] node 0 link 0: mmio [a0000, bffff]
[ 0.168755] node 0 link 0: mmio [80000000, ffffffff]
[ 0.168757] TOM2: 0000000140000000 aka 5120M
[ 0.168760] bus: [bus 00-ff] on node 0 link 0
[ 0.168762] bus: 00 [io 0x0000-0xffff]
[ 0.168763] bus: 00 [mem 0x80000000-0xffffffff]
[ 0.168765] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.168767] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.168809] ACPI: bus type PCI registered
[ 0.168813] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.168878] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.168881] PCI: not using MMCONFIG
[ 0.168883] PCI: Using configuration type 1 for base access
[ 0.169908] bio: create slab <bio-0> at 0
[ 0.169908] ACPI: Added _OSI(Module Device)
[ 0.169908] ACPI: Added _OSI(Processor Device)
[ 0.169908] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169908] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169908] ACPI: EC: Look up EC in DSDT
[ 0.169908] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.173174] ACPI: Interpreter enabled
[ 0.173186] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.173190] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[ 0.173203] ACPI: (supports S0 S1 S4 S5)
[ 0.173206] ACPI: Using IOAPIC for interrupt routing
[ 0.173228] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.173819] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.184833] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.184909] ACPI: No dock devices found.
[ 0.190736] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.190744] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.190746] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.190855] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.190858] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.190861] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.190863] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.190866] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.190869] PCI: root bus 00: hardware-probed resources
[ 0.190961] PCI host bridge to bus 0000:00
[ 0.190965] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.190967] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.190970] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.190972] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.190975] pci_bus 0000:00: root bus resource [mem 0x140000000-0xfcffffffff]
[ 0.190992] pci 0000:00:00.0: [1039:0756] type 00 class 0x060000
[ 0.191115] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[ 0.191159] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.191226] pci 0000:00:02.0: [1039:0965] type 00 class 0x060100
[ 0.191324] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[ 0.191347] pci 0000:00:02.5: reg 0x10: [io 0x01f0-0x01f7]
[ 0.191354] pci 0000:00:02.5: reg 0x14: [io 0x03f4-0x03f7]
[ 0.191360] pci 0000:00:02.5: reg 0x18: [io 0x0170-0x0177]
[ 0.191367] pci 0000:00:02.5: reg 0x1c: [io 0x0374-0x0377]
[ 0.191373] pci 0000:00:02.5: reg 0x20: [io 0xffa0-0xffaf]
[ 0.191400] pci 0000:00:02.5: PME# supported from D3cold
[ 0.191466] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.191477] pci 0000:00:02.7: reg 0x10: [io 0xe800-0xe8ff]
[ 0.191484] pci 0000:00:02.7: reg 0x14: [io 0xec00-0xec7f]
[ 0.191527] pci 0000:00:02.7: supports D1 D2
[ 0.191529] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.191562] pci 0000:00:02.7: System wakeup disabled by ACPI
[ 0.191601] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.191610] pci 0000:00:03.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.191669] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.191706] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.191716] pci 0000:00:03.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.191774] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.191809] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.191819] pci 0000:00:03.2: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.191877] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.191922] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.191933] pci 0000:00:03.3: reg 0x10: [mem 0xfebff000-0xfebfffff]
[ 0.191977] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.192009] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 0.192051] pci 0000:00:04.0: [1039:0190] type 00 class 0x020000
[ 0.192062] pci 0000:00:04.0: reg 0x10: [mem 0xfebfbc00-0xfebfbc7f]
[ 0.192069] pci 0000:00:04.0: reg 0x14: [io 0xe480-0xe4ff]
[ 0.192108] pci 0000:00:04.0: supports D1 D2
[ 0.192110] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192141] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.192182] pci 0000:00:05.0: [1039:0182] type 00 class 0x010485
[ 0.192193] pci 0000:00:05.0: reg 0x10: [io 0xe400-0xe407]
[ 0.192200] pci 0000:00:05.0: reg 0x14: [io 0xe080-0xe083]
[ 0.192207] pci 0000:00:05.0: reg 0x18: [io 0xe000-0xe007]
[ 0.192214] pci 0000:00:05.0: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.192220] pci 0000:00:05.0: reg 0x20: [io 0xd880-0xd88f]
[ 0.192227] pci 0000:00:05.0: reg 0x24: [io 0xd800-0xd87f]
[ 0.192249] pci 0000:00:05.0: PME# supported from D3cold
[ 0.192321] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
[ 0.192373] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.192445] pci 0000:00:07.0: [1039:000a] type 01 class 0x060400
[ 0.192497] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.192576] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.192639] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.192697] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.192751] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.192870] pci 0000:01:00.0: [10de:0a20] type 00 class 0x030000
[ 0.192880] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.192890] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.192899] pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit pref]
[ 0.192906] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.192913] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.192990] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[ 0.193000] pci 0000:01:00.1: reg 0x10: [mem 0xfea7c000-0xfea7ffff]
[ 0.200022] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.200028] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.200031] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfeafffff]
[ 0.200037] pci 0000:00:01.0: bridge window [mem 0xbbf00000-0xdfefffff 64bit pref]
[ 0.200091] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.200153] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.200892] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.200962] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.201026] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.201091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.201154] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.201217] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.201280] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.201346] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.201422] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.201449] Found 1 acpi root devices
[ 0.201561] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.201561] vgaarb: loaded
[ 0.201561] vgaarb: bridge control possible 0000:01:00.0
[ 0.201561] SCSI subsystem initialized
[ 0.201561] ACPI: bus type ATA registered
[ 0.201561] libata version 3.00 loaded.
[ 0.201561] ACPI: bus type USB registered
[ 0.201561] usbcore: registered new interface driver usbfs
[ 0.201561] usbcore: registered new interface driver hub
[ 0.201561] usbcore: registered new device driver usb
[ 0.201561] PCI: Using ACPI for IRQ routing
[ 0.207903] PCI: pci_cache_line_size set to 64 bytes
[ 0.207949] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.207952] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
[ 0.208090] NetLabel: Initializing
[ 0.208092] NetLabel: domain hash size = 128
[ 0.208093] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.208107] NetLabel: unlabeled traffic allowed by default
[ 0.208127] Switched to clocksource refined-jiffies
[ 0.217542] AppArmor: AppArmor Filesystem Enabled
[ 0.217605] pnp: PnP ACPI init
[ 0.217632] ACPI: bus type PNP registered
[ 0.217694] pnp 00:00: [dma 4]
[ 0.217726] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.217776] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.217802] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.217835] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.218371] pnp 00:04: [dma 3]
[ 0.218486] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.218680] pnp 00:05: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.218895] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.218899] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.218902] system 00:06: [io 0x0480-0x048f] has been reserved
[ 0.218905] system 00:06: [io 0x08d0-0x08ff] has been reserved
[ 0.218909] system 00:06: [io 0x0800-0x08cf] could not be reserved
[ 0.218913] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218993] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.218997] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.219000] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.219003] system 00:07: [mem 0xfffc0000-0xffffffff] has been reserved
[ 0.219006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219248] pnp 00:08: [dma 0 disabled]
[ 0.219314] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.219504] system 00:09: [io 0x0290-0x0291] has been reserved
[ 0.219507] system 00:09: [io 0x0a10-0x0a1f] has been reserved
[ 0.219510] system 00:09: [io 0x0a20-0x0a2f] has been reserved
[ 0.219518] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.219522] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219713] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.219716] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.219719] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.219723] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.219726] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.219860] pnp: PnP ACPI: found 11 devices
[ 0.219861] ACPI: bus type PNP unregistered
[ 0.226605] Switched to clocksource acpi_pm
[ 0.226640] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.226644] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.226648] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfeafffff]
[ 0.226652] pci 0000:00:01.0: bridge window [mem 0xbbf00000-0xdfefffff 64bit pref]
[ 0.226658] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.226666] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.226686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.226688] pci_bus 0000:00: resource 5 [mem 0x80000000-0xffffffff]
[ 0.226691] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.226694] pci_bus 0000:00: resource 7 [mem 0x140000000-0xfcffffffff]
[ 0.226697] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.226699] pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfeafffff]
[ 0.226702] pci_bus 0000:01: resource 2 [mem 0xbbf00000-0xdfefffff 64bit pref]
[ 0.226755] NET: Registered protocol family 2
[ 0.227023] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.227533] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.227958] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.227958] TCP: reno registered
[ 0.227958] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227958] NET: Registered protocol family 1
[ 0.227958] pci 0000:01:00.0: Boot video device
[ 0.227958] PCI: CLS 64 bytes, default 64
[ 0.227958] Trying to unpack rootfs image as initramfs...
[ 0.593661] Freeing initrd memory: 16896K (ffff880035ef0000 - ffff880036f70000)
[ 0.593959] PCI-DMA: Disabling AGP.
[ 0.594112] PCI-DMA: aperture base @ 74000000 size 65536 KB
[ 0.594114] PCI-DMA: using GART IOMMU.
[ 0.594120] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.598818] Scanning for low memory corruption every 60 seconds
[ 0.599154] Initialise module verification
[ 0.599214] audit: initializing netlink socket (disabled)
[ 0.599237] type=2000 audit(1384072562.595:1): initialized
[ 0.628071] bounce pool size: 64 pages
[ 0.628085] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.629762] zbud: loaded
[ 0.629931] VFS: Disk quotas dquot_6.5.2
[ 0.629990] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.630657] fuse init (API version 7.22)
[ 0.630775] msgmni has been set to 5885
[ 0.631417] Key type asymmetric registered
[ 0.631421] Asymmetric key parser 'x509' registered
[ 0.631464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.631509] io scheduler noop registered
[ 0.631512] io scheduler deadline registered (default)
[ 0.631541] io scheduler cfq registered
[ 0.631744] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 0.631829] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.631904] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.631926] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.632125] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.632133] ACPI: Power Button [PWRB]
[ 0.632176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.632179] ACPI: Power Button [PWRF]
[ 0.632355] GHES: HEST is not enabled!
[ 0.632472] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.652836] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.654499] Linux agpgart interface v0.103
[ 0.656150] brd: module loaded
[ 0.657002] loop: module loaded
[ 0.657179] pata_sis 0000:00:02.5: version 0.5.2
[ 0.657691] scsi0 : pata_sis
[ 0.657981] scsi1 : pata_sis
[ 0.658201] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.658203] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.658526] libphy: Fixed MDIO Bus: probed
[ 0.658636] tun: Universal TUN/TAP device driver, 1.6
[ 0.658638] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.658693] PPP generic driver version 2.4.2
[ 0.658753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.658756] ehci-pci: EHCI PCI platform driver
[ 0.658867] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 0.658876] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.658917] ehci-pci 0000:00:03.3: cache line size of 64 is not supported
[ 0.658934] ehci-pci 0000:00:03.3: irq 23, io mem 0xfebff000
[ 0.668014] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.668043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.668046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668049] usb usb1: Product: EHCI Host Controller
[ 0.668051] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[ 0.668053] usb usb1: SerialNumber: 0000:00:03.3
[ 0.668170] hub 1-0:1.0: USB hub found
[ 0.668177] hub 1-0:1.0: 8 ports detected
[ 0.668354] ehci-platform: EHCI generic platform driver
[ 0.668367] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.668369] ohci-platform: OHCI generic platform driver
[ 0.668376] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.668452] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.668770] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.668776] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.668940] mousedev: PS/2 mouse device common for all mice
[ 0.669080] rtc_cmos 00:01: RTC can wake from S4
[ 0.669212] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.669233] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 0.669307] device-mapper: uevent: version 1.0.3
[ 0.669382] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.669391] cpuidle: using governor ladder
[ 0.669393] cpuidle: using governor menu
[ 0.669402] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.669518] TCP: cubic registered
[ 0.669643] NET: Registered protocol family 10
[ 0.669904] NET: Registered protocol family 17
[ 0.669918] Key type dns_resolver registered
[ 0.670189] PM: Hibernation image not present or could not be loaded.
[ 0.670194] Loading module verification certificates
[ 0.671339] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
[ 0.671356] registered taskstats version 1
[ 0.674717] Key type trusted registered
[ 0.676998] Key type encrypted registered
[ 0.679866] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.680175] Magic number: 5:210:624
[ 0.680330] rtc_cmos 00:01: setting system clock to 2013-11-10 08:36:03 UTC (1384072563)
[ 0.680431] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.680431] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[ 0.680431] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 0.680445] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.680446] EDD information not available.
[ 0.969888] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 0.969897] Write protecting the kernel read-only data: 12288k
[ 0.973624] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[ 0.976453] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[ 0.993709] systemd-udevd[101]: starting version 204
[ 1.018087] mii: module verification failed: signature and/or required key missing - tainting kernel
[ 1.020046] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[ 1.020247] sis190 0000:00:04.0: setting latency timer to 64
[ 1.020265] sis190: 0000:00:04.0: Read MAC address from EEPROM
[ 1.020268] sis190: 0000:00:04.0: Error EEPROM read 0
[ 1.020270] sis190: 0000:00:04.0: Read MAC address from APC
[ 1.068028] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1
[ 1.564014] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[ 1.596231] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 190 PCI Fast Ethernet adapter at ffffc90000632c00 (IRQ: 19), 00:13:8f:4b:f4:0a
[ 1.596234] sis190 0000:00:04.0 eth0: GMII mode.
[ 1.596238] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[ 1.628348] sata_sis 0000:00:05.0: version 1.0
[ 1.628505] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
[ 1.628858] scsi2 : sata_sis
[ 1.628951] scsi3 : sata_sis
[ 1.629001] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 17
[ 1.629004] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 17
[ 1.948044] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.957174] ata3.00: ATA-7: Maxtor 6L250S0, BACE1G20, max UDMA/133
[ 1.957181] ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.973152] ata3.00: configured for UDMA/133
[ 1.973352] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250S0 BACE PQ: 0 ANSI: 5
[ 1.973627] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.973646] sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 1.973766] sd 2:0:0:0: [sda] Write Protect is off
[ 1.973770] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.973809] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.049059] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 2.049596] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.292046] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.300218] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max UDMA/100
[ 2.316202] ata4.00: configured for UDMA/100
[ 2.320829] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB05 PQ: 0 ANSI: 5
[ 2.325106] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.325109] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.325261] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.325351] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.702888] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.702896] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.553886] EXT4-fs (sda1): recovery complete
[ 3.560717] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.021376] Adding 1951860k swap on /dev/sda6. Priority:-1 extents:1 across:1951860k FS
[ 14.104677] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.228258] systemd-udevd[281]: starting version 204
[ 14.369589] lp: driver loaded but no devices found
[ 14.376431] w83627hf: w83627hf: Found W83697HF chip at 0x290
[ 14.414470] [drm] Initialized drm 1.1.0 20060810
[ 14.434664] parport_pc 00:04: reported by Plug and Play ACPI
[ 14.434805] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.456188] nvidia: module license 'NVIDIA' taints kernel.
[ 14.456197] Disabling lock debugging due to kernel taint
[ 14.507066] ohci-pci: OHCI PCI platform driver
[ 14.507386] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 14.507404] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 14.507453] ohci-pci 0000:00:03.0: irq 20, io mem 0xfebfc000
[ 14.509563] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.510834] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 14.510843] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.60 Wed Sep 25 14:28:26 PDT 2013
[ 14.535455] lp0: using parport0 (interrupt-driven).
[ 14.537295] MCE: In-kernel MCE decoding enabled.
[ 14.545504] EDAC MC: Ver: 3.0.0
[ 14.551823] AMD64 EDAC driver v3.4.0
[ 14.559378] gameport gameport0: NS558 PnP Gameport is pnp00:05/gameport0, io 0x200, speed 854kHz
[ 14.564193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.564198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.564201] usb usb2: Product: OHCI PCI host controller
[ 14.564203] usb usb2: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
[ 14.564206] usb usb2: SerialNumber: 0000:00:03.0
[ 14.564400] hub 2-0:1.0: USB hub found
[ 14.564408] hub 2-0:1.0: 3 ports detected
[ 14.565917] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 14.565927] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 14.565965] ohci-pci 0000:00:03.1: irq 21, io mem 0xfebfd000
[ 14.613332] microcode: AMD CPU family 0xf not supported
[ 14.622158] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.622166] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.622169] usb usb3: Product: OHCI PCI host controller
[ 14.622171] usb usb3: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
[ 14.622173] usb usb3: SerialNumber: 0000:00:03.1
[ 14.622890] hub 3-0:1.0: USB hub found
[ 14.622899] hub 3-0:1.0: 3 ports detected
[ 14.624435] type=1400 audit(1384072577.440:2): apparmor="STATUS" operation="profile_load" parent=326 profile="unconfined" name="/sbin/dhclient" pid=333 comm="apparmor_parser"
[ 14.624447] type=1400 audit(1384072577.440:3): apparmor="STATUS" operation="profile_load" parent=326 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"
[ 14.624453] type=1400 audit(1384072577.440:4): apparmor="STATUS" operation="profile_load" parent=326 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[ 14.624917] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 14.624928] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 14.624973] ohci-pci 0000:00:03.2: irq 22, io mem 0xfebfe000
[ 14.625227] type=1400 audit(1384072577.440:5): apparmor="STATUS" operation="profile_replace" parent=326 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"
[ 14.625236] type=1400 audit(1384072577.440:6): apparmor="STATUS" operation="profile_replace" parent=326 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[ 14.625688] type=1400 audit(1384072577.440:7): apparmor="STATUS" operation="profile_replace" parent=326 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[ 14.632245] hda_intel: Disabling MSI
[ 14.632265] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 14.632324] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 14.639301] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 14.682100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.682107] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.682110] usb usb4: Product: OHCI PCI host controller
[ 14.682112] usb usb4: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
[ 14.682114] usb usb4: SerialNumber: 0000:00:03.2
[ 14.684175] hub 4-0:1.0: USB hub found
[ 14.684185] hub 4-0:1.0: 2 ports detected
[ 14.685212] EDAC amd64: DRAM ECC disabled.
[ 14.685221] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 14.685221] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 14.685221] (Note that use of the override may cause unknown side effects.)
[ 14.762311] ppdev: user-space parallel port driver
[ 14.944034] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 14.988822] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.008056] intel8x0_measure_ac97_clock: measured 54744 usecs (2634 samples)
[ 15.008063] intel8x0: clocking to 48000
[ 15.148197] usb 2-1: New USB device found, idVendor=04b3, idProduct=310b
[ 15.148203] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.324021] usb 2-2: new low-speed USB device number 3 using ohci-pci
[ 15.464125] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input2
[ 15.464234] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input3
[ 15.464310] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input4
[ 15.464380] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
[ 15.538192] usb 2-2: New USB device found, idVendor=046d, idProduct=c315
[ 15.538199] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.538202] usb 2-2: Product: Logitech USB Keyboard
[ 15.538204] usb 2-2: Manufacturer: Logitech
[ 16.217219] hidraw: raw HID events driver (C) Jiri Kosina
[ 16.232361] usbcore: registered new interface driver usbhid
[ 16.232367] usbhid: USB HID core driver
[ 16.235134] input: HID 04b3:310b as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input6
[ 16.237431] hid-generic 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:03.0-1/input0
[ 16.239732] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input7
[ 16.239986] hid-generic 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:03.0-2/input0
[ 16.674963] kjournald starting. Commit interval 5 seconds
[ 16.675133] EXT3-fs (sda5): using internal journal
[ 16.675138] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 17.261370] kjournald starting. Commit interval 5 seconds
[ 17.280904] EXT3-fs (sda4): using internal journal
[ 17.280909] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 17.899746] init: failsafe main process (563) killed by TERM signal
[ 18.124581] init: udev-fallback-graphics main process (584) terminated with status 1
[ 18.245634] Bluetooth: Core ver 2.16
[ 18.245681] NET: Registered protocol family 31
[ 18.245683] Bluetooth: HCI device and connection manager initialized
[ 18.245703] Bluetooth: HCI socket layer initialized
[ 18.245708] Bluetooth: L2CAP socket layer initialized
[ 18.245716] Bluetooth: SCO socket layer initialized
[ 18.269232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.269239] Bluetooth: BNEP filters: protocol multicast
[ 18.269258] Bluetooth: BNEP socket layer initialized
[ 18.310958] Bluetooth: RFCOMM TTY layer initialized
[ 18.310985] Bluetooth: RFCOMM socket layer initialized
[ 18.310987] Bluetooth: RFCOMM ver 1.11
[ 18.664774] type=1400 audit(1384072581.479:8): apparmor="STATUS" operation="profile_replace" parent=748 profile="unconfined" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
[ 18.664789] type=1400 audit(1384072581.479:9): apparmor="STATUS" operation="profile_replace" parent=748 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 18.664795] type=1400 audit(1384072581.479:10): apparmor="STATUS" operation="profile_replace" parent=748 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[ 18.665504] type=1400 audit(1384072581.479:11): apparmor="STATUS" operation="profile_replace" parent=748 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 18.716109] init: avahi-cups-reload main process (755) terminated with status 1
[ 18.974154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.974388] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.336553] vboxdrv: Found 2 processor cores.
[ 19.342283] vboxdrv: fAsync=1 offMin=0x2302a8 offMax=0x2302a8
[ 19.342471] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 19.342473] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).