[HowTo]Install VirtualGL and TurboVNC to Jetson TK1
[quote=""]Hello! So i tried to run the pacjage files in comment 17 and i think i almost get it to work but i get this after line 1 in the last code box of the comment: https://drive.google.com/open?id=0B4-ooeVD-7cLS3JUR2tzbk1SZFE do you know of any way this can be fixed?[/quote] Your screen shot is a same image you posted before. Are you sure that link is right?
said:Hello!
So i tried to run the pacjage files in comment 17 and i think i almost get it to work but i get this after line 1 in the last code box of the comment:

https://drive.google.com/open?id=0B4-ooeVD-7cLS3JUR2tzbk1SZFE

do you know of any way this can be fixed?

Your screen shot is a same image you posted before.
Are you sure that link is right?

#31
Posted 08/06/2017 10:35 PM   
Sorry, i must have posted the wrong link, this is the correct one: https://drive.google.com/open?id=0B4-ooeVD-7cLLTF5dXJUdmVZcEk
Sorry, i must have posted the wrong link, this is the correct one:


https://drive.google.com/open?id=0B4-ooeVD-7cLLTF5dXJUdmVZcEk

#32
Posted 08/08/2017 11:28 PM   
[code]/opt/VirtualGL/bin/vglrun ./OpenGLProgram[/code] It is just a example command. There is no OpenGLProgram executable. When you run a OpenGL program from VNC client, that command needs to follow after /opt/VirtualGL/bin/vglrun. vglrun is needed when you run a OpenGL program from a VNC client. It is not needed when you run it on the desktop displayed on the display connected to your Jetson. It is also not needed when you run a program which doesn't use OpenGL. [code]/opt/TurboVNC/bin/vncserver[/code] This command start TurboVNC server [code]/opt/TurboVNC/bin/vncserver -kill :1[/code] This command stop TurboVNC server After you start TurboVNC server, you can connect to it from a VNC client and you will see xfce4 desktop. TurboVNC server provide a desktop environment which is independent from a desktop environment you see on your display connected to a HDMI port on your Jetson.
/opt/VirtualGL/bin/vglrun ./OpenGLProgram

It is just a example command. There is no OpenGLProgram executable.
When you run a OpenGL program from VNC client, that command needs to follow after /opt/VirtualGL/bin/vglrun.

vglrun is needed when you run a OpenGL program from a VNC client.
It is not needed when you run it on the desktop displayed on the display connected to your Jetson.
It is also not needed when you run a program which doesn't use OpenGL.

/opt/TurboVNC/bin/vncserver

This command start TurboVNC server

/opt/TurboVNC/bin/vncserver -kill :1

This command stop TurboVNC server

After you start TurboVNC server, you can connect to it from a VNC client and you will see xfce4 desktop.
TurboVNC server provide a desktop environment which is independent from a desktop environment you see on your display connected to a HDMI port on your Jetson.

#33
Posted 08/09/2017 10:41 PM   
so just to clarify, all of the lines in comment 17 are being ran in the jetson's terminal or on the host computer?
so just to clarify, all of the lines in comment 17 are being ran in the jetson's terminal or on the host computer?

#34
Posted 08/09/2017 11:55 PM   
comment #17 are executed in the jetson's terminal, not on the host computer. You can also connect to your Jetson from the host PC using SSH and do comment #17. I added some explanation to comment #1 and #17. I hope that will help you.
comment #17 are executed in the jetson's terminal, not on the host computer.
You can also connect to your Jetson from the host PC using SSH and do comment #17.

I added some explanation to comment #1 and #17.
I hope that will help you.

#35
Posted 08/10/2017 02:09 AM   
Scroll To Top

Add Reply