I have an “ASUS ROG PG278Q” G-SYNC DP monitor that can up to 2560x1440@144Hz, connected to a GTX TITAN.
When I force the resolution to 2560x1440@144Hz, the screen turns black after 2-15 seconds.
Reproduced with 361.16, 361.18 and 361.28.
It does not happen in 2560x1440@60Hz or with 358.XX drivers version and previous ones.
To workaround this, I have to force “performance mode”.
I have a specific module parameter to force PCI-E Gen3 (Maybe there is a link, maybe not):
$ cat /etc/modprobe.d/nvidia.conf
options nvidia NVreg_EnablePCIeGen3=1
Base Board Information
Manufacturer: Intel Corporation
Product Name: DX79TO
Version: AAG28805-401
Does any other people got the same issue ? Thank you for your help.
You can do nomodeset, acpi=off, noapic, nolapic, etc. from a drop down box.
In any case, your deal is power management. Don’t let it mess with the power in the PCIE slot with ‘pcie_aspm=off’. Reboot. Set it to Adaptive, and try again. Pegging your vid card’s voltage and fan at 100% isn’t a solution, but you already know that.
And lastly, use 352.79 if you can. That’s stable. 361 is buggy as balls.