Dear Fox
Here:
U-Boot 2014.10-rc2-00002-g105d2f3 (Jun 25 2015 - 15:19:50)
TEGRA124
Board: NVIDIA Jetson TK1
I2C: ready
DRAM: 4 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment
tegra-pcie: PCI regions:
tegra-pcie: I/O: 0x12000000-0x12010000
tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000
tegra-pcie: prefetchable memory: 0x20000000-0x40000000
tegra-pcie: 2x1, 1x1 configuration
WÖ–…µpcie: probing port 0, using 2 lanes
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, ignoring
tegra-pcie: probing port 1, using 1 lanes
In: serial
Out: serial
Err: serial
Net: RTL8169#0
Warning: RTL8169#0 using MAC address from net device
Hit any key to stop autoboot: 2 1 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0…
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
1572 bytes read in 126 ms (11.7 KiB/s)
Jetson-TK1 eMMC boot options
1: primary kernel
2: primary kernel
Enter choice: 1
1: primary kernel
Retrieving file: /boot/zImage
6221576 bytes read in 192 ms (30.9 MiB/s)
append: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M mem=2048M@4096M memtype=1 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt
Retrieving file: /boot/tegra124-jetson_tk1-pm375-000-c00-00.dtb
59649 bytes read in 68 ms (856.4 KiB/s)
Kernel image @ 0x81000000 [ 0x000000 - 0x5eef08 ]
Flattened Device Tree blob at 82000000
Booting using the fdt blob at 0x82000000
Using Device Tree in place at 82000000, end 82011900
Starting kernel …
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.40-gc80d685 (bbasu@bbasu) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #402 SMP PREEMPT Wed Mar 16 10:18:06 IST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0
[ 0.000000] Found tsec, start=0xf4900000 size=2000000
[ 0.000000] Tegra reserved memory:
[ 0.000000] LP0: f46ff000 - f46ff80f
[ 0.000000] Bootloader framebuffer: 00000000 - 00000000
[ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
[ 0.000000] Framebuffer: f8500000 - f96fffff
[ 0.000000] 2nd Framebuffer: f9700000 - fdefffff
[ 0.000000] Carveout: 00000000 - 00000000
[ 0.000000] Vpr: 00000000 - 00000000
[ 0.000000] Tsec: f4900000 - f68fffff
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] DTS File Name: /home/bbasu/l4t_rel21/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts
[ 0.000000] Tegra12: CPU Speedo value 2305, Soc Speedo value 2196, Gpu Speedo value 2087
[ 0.000000] Tegra12: CPU Speedo ID 0, Soc Speedo ID 0, Gpu Speedo ID 0
[ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0
[ 0.000000] Tegra Revision: A01 SKU: 0x0 CPU Process: 0 Core Process: 1
[ 0.000000] tegra: PLLP fixed rate: 408000000
[ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
[ 0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON
[ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000
[ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000
[ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000
[ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000
[ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000
[ 0.000000] Lowering se maximum rate from 600000000 to 480000000
[ 0.000000] Lowering vde maximum rate from 600000000 to 480000000
[ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000
[ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
[ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
[ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
[ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
[ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
[ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
[ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
[ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
[ 0.000000] Lowering gbus maximum rate from 1032000000 to 648000000
[ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2014500000
[ 0.000000] tegra dvfs: VDD_CPU nominal 1220mV, scaling enabled
[ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
[ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] tegra_powergate_init: DONE
[ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c403f000 s15360 r8192 d13312 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1015056
[ 0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M mem=2048M@4096M memtype=1 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1923MB 2048MB = 3971MB total
[ 0.000000] Memory: 4001780k/4001780k available, 158732k reserved, 3288060K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0b4f2b4 (11549 kB)
[ 0.000000] .init : 0xc0b50000 - 0xc0bd0c00 ( 515 kB)
[ 0.000000] .data : 0xc0bd2000 - 0xc0d2f718 (1398 kB)
[ 0.000000] .bss : 0xc0d2f718 - 0xc0dcaf0c ( 622 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:960
[ 0.000000] the number of interrupt controllers found is 5
[ 0.000000] Architected local timer running at 12.00MHz (phys).
[ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
[ 0.000000] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.003768] Calibrating delay loop (skipped), value calculated using timer frequency… lpj=12000
[ 0.003838] pid_max: default: 32768 minimum: 301
[ 0.004137] Mount-cache hash table entries: 512
[ 0.026711] Initializing cgroup subsys debug
[ 0.026779] Initializing cgroup subsys freezer
[ 0.026867] CPU: Testing write buffer coherency: ok
[ 0.026940] ftrace: allocating 33230 entries in 65 pages
[ 0.069985] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.070028] Setting up static identity map for 0xc081d910 - 0xc081d9b4
[ 0.074021] ftrace: Allocated trace_printk buffers
[ 0.081706] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.084732] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.087790] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.087985] Brought up 4 CPUs
[ 0.088049] SMP: Total of 4 processors activated.
[ 0.088066] CPU: All CPU(s) started in SVC mode.
[ 0.088939] devtmpfs: initialized
[ 0.097709] pinctrl core: initialized pinctrl subsystem
[ 0.098024] regulator-dummy: no parameters
[ 0.098797] NET: Registered protocol family 16
[ 0.101140] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.102401] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
[ 0.103827] console [pstore-1] enabled
[ 0.103866] ramoops: attached 0x200000@0xf8300000, ecc: 0/0
[ 0.104261] cpuidle: using governor ladder
[ 0.104285] cpuidle: using governor menu
[ 0.108185] ardbeg_camera_auxdata: update camera lookup table.
[ 0.117103] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
[ 0.117515] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[ 0.124351] Wake16 for irq=34
[ 0.126849] Wake58 for irq=81
[ 0.126899] Wake41 for irq=129
[ 0.126918] Wake43 for irq=129
[ 0.126965] Wake40 for irq=53
[ 0.126982] Wake42 for irq=53
[ 0.131220] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x41:0x00
[ 0.131306] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x41:0x00
[ 0.131392] Selecting UARTD as the debug console
[ 0.131439] The debug console clock name is uartd
[ 0.131881] ardbeg_modem_init: modem_id = 0
[ 0.134565] Clear bootloader IO dpd settings
[ 0.134801] Loading jetson TK132 4GB EMC tables.
[ 0.135062] tegra: pll_m is selected as scalable EMC clock source
[ 0.135106] Lowering emc maximum rate from 1200000000 to 792000000
[ 0.135136] tegra: validated EMC DFS table
[ 0.135266] ardbeg_edp_init: CPU regulator 11000 mA
[ 0.357361] ardbeg_edp_init: GPU regulator 11400 mA
[ 0.358346] swapper/0 isomgr_init(): iso emc max clk=792000KHz
[ 0.358368] swapper/0 isomgr_init(): max_iso_bw=6336000KB[ 0.358797] ardbeg_touch_init init raydium touch
[ 0.358951] Raydium - touch platform_id : 8
[ 0.449124] platform tegradc.0: IOVA linear map 0x00000000f8500000(1200000)
[ 0.452490] platform tegradc.0: IOVA linear map 0x00000000f9700000(4800000)
[ 0.457628] platform tegradc.1: IOVA linear map 0x00000000f8500000(1200000)
[ 0.460998] platform tegradc.1: IOVA linear map 0x00000000f9700000(4800000)
[ 0.461439] FUSE: cp_rev 1 ft_rev 1
[ 0.461617] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled
[ 0.462057] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.462089] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.462333] mc-err: Started MC error interface!
[ 0.473173] bio: create slab at 0
[ 0.475101] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
[ 0.475157] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name
[ 0.475295] vdd-ac-bat: 8400 mV
[ 0.475437] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name
[ 0.475472] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name
[ 0.475591] vdd-3v3-aon: 3300 mV
[ 0.475751] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name
[ 0.475786] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name
[ 0.475818] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name
[ 0.475855] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name
[ 0.475886] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name
[ 0.475917] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name
[ 0.475948] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name
[ 0.475979] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name
[ 0.476010] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name
[ 0.476042] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name
[ 0.476197] reg-3v3-supply: 3300 mV
[ 0.477846] vgaarb: loaded
[ 0.478492] SCSI subsystem initialized
[ 0.478869] usbcore: registered new interface driver usbfs
[ 0.478937] usbcore: registered new interface driver hub
[ 0.479045] usbcore: registered new device driver usb
[ 0.481943] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x05
[ 0.481974] as3722 4-0040: Device version 1V1 and platform version 1V2
[ 0.482001] as3722 4-0040: Final OTP version 1V2
[ 0.486944] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio
[ 0.487160] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.487221] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.487275] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.487327] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.487361] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.487393] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[ 0.487457] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.487490] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.487521] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.487553] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[ 0.487584] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
[ 0.487616] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[ 0.487647] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
[ 0.487713] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.487745] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.487776] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.487808] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[ 0.487842] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[ 0.487877] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[ 0.487908] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[ 0.487940] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
[ 0.487972] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name
[ 0.488004] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name
[ 0.488036] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name
[ 0.488067] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name
[ 0.488098] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name
[ 0.488154] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.488186] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.488241] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.488272] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.488304] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.488354] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[ 0.488387] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
[ 0.488418] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[ 0.488450] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
[ 0.488481] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[ 0.488512] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[ 0.488572] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.488603] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.488695] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[ 0.488727] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[ 0.488758] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
[ 0.488813] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.488865] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.488897] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.488928] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.488984] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.489016] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.489073] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.489123] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.489155] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.489235] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[ 0.489267] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[ 0.489298] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[ 0.490229] vdd-cpu: 650 <–> 1300 mV at 1000 mV 3500 mA
[ 0.491006] vdd-core: applied init 1150000uV constraint
[ 0.491602] vdd-core: 700 <–> 1350 mV at 1150 mV 3500 mA
[ 0.492786] vddio-ddr: at 1350 mV
[ 0.493117] as3722-sd3: no parameters
[ 0.493722] avdd-pll-pex: 1050 mV
[ 0.494913] vdd-1v8: at 1800 mV
[ 0.495250] vdd-gpu: applied init 1000000uV constraint
[ 0.496140] vdd-gpu: 650 <–> 1200 mV at 1000 mV 3500 mA
[ 0.496649] avdd-pll: at 1050 mV at 300 mA
[ 0.497931] vdd-cam: 1800 mV at 150 mA
[ 0.498608] avdd-dsi-csi: at 1200 mV at 150 mA
[ 0.499830] vdd-rtc: 800 mV at 150 mA
[ 0.500308] avdd-cam: 2800 mV at 150 mA
[ 0.500823] vdd-1v2-cam: 1175 mV at 150 mA
[ 0.501198] vddio-sdmmc-2: 1800 <–> 3300 mV at 150 mA
[ 0.501699] vdd-1v1-cam: 1275 mV at 150 mA
[ 0.502667] avdd-spi: 3300 mV at 150 mA
[ 0.503167] vdd-2v7-cam: 2800 mV at 150 mA
[ 0.503692] vpp-fuse: 1800 mV at 150 mA
[ 0.504795] Linux video capture interface: v2.00
[ 0.505920] Advanced Linux Sound Architecture Driver Initialized.
[ 0.506372] ardbeg_wifi_power: 1
[ 0.606726] usb0-vbus: 5000 mV
[ 0.607030] usb1-usb2-vbus: 5000 mV
[ 0.607345] vdd-hdmi: 5000 mV
[ 0.607641] avdd-hdmi-pll: 3300 mV
[ 0.607691] avdd-hdmi-pll: supplied by avdd-pll-pex
[ 0.607863] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name
[ 0.608011] vdd-lcd-bl: 3300 mV
[ 0.608168] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
[ 0.608336] vdd-lcd-bl-en: 5000 mV
[ 0.608518] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name
[ 0.608646] reg-5v0-supply: 5000 mV
[ 0.608817] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name
[ 0.608851] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name
[ 0.608883] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name
[ 0.608932] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name
[ 0.608964] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name
[ 0.608996] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name
[ 0.609027] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name
[ 0.609059] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name
[ 0.609090] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name
[ 0.609237] reg-1v8-supply: 1800 mV
[ 0.609570] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name
[ 0.609732] reg-dcdc-1v2: 1200 mV
[ 0.609917] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
[ 0.609952] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
[ 0.610535] as3722-gpio2-supply: 3300 mV
[ 0.610749] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
[ 0.611272] as3722-gpio4-supply: 3300 mV
[ 0.611586] sdmmc-en-supply: 3300 mV
[ 0.611848] vdd-cdc-1v2-aud: 1200 mV
[ 0.612006] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name
[ 0.612042] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name
[ 0.612075] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name
[ 0.612200] reg-aon-1v8: 1800 mV
[ 0.612380] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name
[ 0.612515] reg-aon-1v2: 1200 mV
[ 0.615521] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected
[ 0.618954] tegra: started io power detection dynamic control
[ 0.618981] tegra: NO_IO_POWER setting 0x0
[ 0.619006] Switching to clocksource arch_sys_counter
[ 0.640830] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.641024] nvmap_page_pool_init: Total MB RAM: 3923
[ 0.641048] nvmap_page_pool_init: nvmap page pool size: 125567 pages (490 MB)
[ 0.641235] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.641408] iram: dma coherent mem declare 0x0000000040001000,258048
[ 0.642265] misc nvmap: created heap iram base 0x40001000 size (252KiB)
[ 0.642433] nvmap:inner cache maint threshold=2097152
[ 0.652344] Wake39 for irq=52
[ 0.652446] tegra-otg tegra-otg: otg transceiver registered
[ 0.652850] NET: Registered protocol family 2
[ 0.653535] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.653743] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.653945] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.654006] TCP: reno registered
[ 0.654031] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.654109] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.654389] NET: Registered protocol family 1
[ 0.654791] RPC: Registered named UNIX socket transport module.
[ 0.654817] RPC: Registered udp transport module.
[ 0.654837] RPC: Registered tcp transport module.
[ 0.654857] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.655169] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[ 0.660925] host1x host1x: initialized
[ 0.662224] CPU PMU: probing PMU on CPU 0
[ 0.662259] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[ 0.662898] tegra_throttle : init passed
[ 0.663026] Tegra cpuquiet initialized: disabled
[ 0.663194] cpu-tegra: init EDP limit: 2014 MHz
[ 0.664207] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
[ 0.664599] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
[ 0.664843] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
[ 0.665112] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.666825] bounce pool size: 64 pages
[ 0.668319] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.668611] NTFS driver 2.1.30 [Flags: R/O].
[ 0.668761] fuse init (API version 7.22)
[ 0.669001] msgmni has been set to 1425
[ 0.670460] io scheduler noop registered (default)
[ 0.871826] PCIE: port 0: link down, retrying
[ 1.071969] PCIE: port 0: link down, retrying
[ 1.272135] PCIE: port 0: link down, retrying
[ 1.272157] PCIE: port 0: link down, ignoring
[ 1.277321] PCI host bridge to bus 0000:00
[ 1.277351] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
[ 1.277382] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
[ 1.277414] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 1.277441] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.277830] PCI: bus0: Fast back to back transfers disabled
[ 1.277860] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.280124] PCI: bus1: Fast back to back transfers disabled
[ 1.280471] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 1.280502] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.280746] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
[ 1.280781] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref]
[ 1.280815] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.280848] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref]
[ 1.280896] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit]
[ 1.280943] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.280974] pcieport 0000:00:00.0: PCI bridge to [bus 01]
[ 1.280999] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 1.281028] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
[ 1.281059] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref]
[ 1.281124] PCIE: No Link speed change happened
[ 1.281692] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
[ 1.281802] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
[ 1.282715] tsec tsec: initialized
[ 1.284236] isp isp.0: initialized
[ 1.285232] isp isp.1: initialized
[ 1.286790] falcon vic03.0: initialized
[ 1.287979] falcon msenc: initialized
[ 1.288830] tegradc tegradc.0: DSI: HS clock rate is 464500
[ 1.290260] p,wuxga-10-1 panel dt support not available
[ 1.569994] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000
[ 1.659247] tegradc tegradc.0: DSI pad calibration done
[ 1.666397] tegradc tegradc.0: probed
[ 1.666881] tegradc tegradc.0: fb registered
[ 1.666905] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110
[ 1.672779] gpio wake4 for gpio=111
[ 1.700745] tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
[ 1.702050] tegradc tegradc.1: probed
[ 1.725763] Console: switching to colour frame buffer device 240x75
[ 1.746989] tegradc tegradc.1: fb registered
[ 1.747117] hdmi_state_machine_worker (tid edb0c580): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1
[ 1.747299] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug)
[ 1.750583] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
[ 1.751437] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.752876] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
[ 1.787714] hdmi_state_machine_worker (tid edb0c580): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
[ 1.787721] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
[ 1.851585] hdmi_state_machine_worker (tid edb0c580): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
[ 1.905187] panel size 52 by 32
[ 2.562184] tegra_dc_hdmi_irq: start
[ 2.562194] tegra_dc_hdmi_irq: end
[ 2.712178] tegra_dc_hdmi_irq: start
[ 2.712190] tegra_dc_hdmi_irq: end
[ 4.077785] console [ttyS0] enabled
[ 4.077919] tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
[ 4.078482] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
[ 4.078803] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
[ 4.079141] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
[ 4.085531] loop: module loaded
[ 4.085845] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
[ 4.089660] gpio wake35 for gpio=70
[ 4.089732] nct1008_nct72 0-004c: nct1008_probe: initialized
[ 4.090387] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
[ 4.091438] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[ 4.093418] tegra_profiler: Branch: Dev
[ 4.093421] tegra_profiler: Version: 1.103
[ 4.093426] tegra_profiler: Samples version: 34
[ 4.093429] tegra_profiler: IO version: 18
[ 4.093436] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
[ 4.093624] tegra_profiler: auth: init
[ 4.094024] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[ 4.095514] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
[ 4.095526] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
[ 4.096812] scsi0 : tegra-sata
[ 4.097250] scsi1 : tegra-sata
[ 4.097477] ata1: SATA max UDMA/133 irq 55
[ 4.097481] ata2: DUMMY
[ 4.099590] tun: Universal TUN/TAP device driver, 1.6
[ 4.099593] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 4.099839] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.102925] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0000000, 00:04:4b:1d:6b:f9, XID 0c000800 IRQ 641
[ 4.102933] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.103110] usbcore: registered new interface driver asix
[ 4.103158] usbcore: registered new interface driver ax88179_178a
[ 4.103199] usbcore: registered new interface driver cdc_ether
[ 4.103254] usbcore: registered new interface driver smsc95xx
[ 4.103289] usbcore: registered new interface driver cdc_subset
[ 4.103370] usbcore: registered new interface driver cdc_ncm
[ 4.103389] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 4.103618] tegra USB phy - inst[1] platform info:
[ 4.103621] port_otg: no
[ 4.103624] has_hostpc: yes
[ 4.103627] phy_interface: USB_PHY_INTF_UTMI
[ 4.103630] op_mode: TEGRA_USB_OPMODE_HOST
[ 4.103632] qc2_voltage: 0
[ 4.103635] vbus_gpio: -1
[ 4.103639] hot_plug: disabled
[ 4.103641] remote_wakeup: enabled
[ 4.105207] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
[ 4.105240] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
[ 4.105349] Wake40 for irq=53
[ 4.105351] Wake42 for irq=53
[ 4.105372] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
[ 4.111107] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
[ 4.111206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.111213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.111219] usb usb1: Product: Tegra EHCI Host Controller
[ 4.111224] usb usb1: Manufacturer: Linux 3.10.40-gc80d685 ehci_hcd
[ 4.111229] usb usb1: SerialNumber: tegra-ehci.1
[ 4.111801] hub 1-0:1.0: USB hub found
[ 4.111818] hub 1-0:1.0: 1 port detected
[ 4.112224] tegra USB phy - inst[2] platform info:
[ 4.112227] port_otg: no
[ 4.112229] has_hostpc: yes
[ 4.112232] phy_interface: USB_PHY_INTF_UTMI
[ 4.112235] op_mode: TEGRA_USB_OPMODE_HOST
[ 4.112238] qc2_voltage: 0
[ 4.112240] vbus_gpio: -1
[ 4.112243] hot_plug: disabled
[ 4.112246] remote_wakeup: enabled
[ 4.113719] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
[ 4.113741] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
[ 4.113835] Wake41 for irq=129
[ 4.113838] Wake43 for irq=129
[ 4.113861] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
[ 4.119110] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
[ 4.119186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.119194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.119200] usb usb2: Product: Tegra EHCI Host Controller
[ 4.119206] usb usb2: Manufacturer: Linux 3.10.40-gc80d685 ehci_hcd
[ 4.119211] usb usb2: SerialNumber: tegra-ehci.2
[ 4.119734] hub 2-0:1.0: USB hub found
[ 4.119750] hub 2-0:1.0: 1 port detected
[ 4.120171] ehci-pci: EHCI PCI platform driver
[ 4.120453] tegra_xusb_read_usb_calib: usb_calib0 = 0x02040308
[ 4.120729] usbcore: registered new interface driver usb-storage
[ 4.120845] usbcore: registered new interface driver usbserial
[ 4.120887] usbcore: registered new interface driver option
[ 4.120920] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.121026] usbcore: registered new interface driver pl2303
[ 4.121058] usbserial: USB Serial support registered for pl2303
[ 4.121093] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
[ 4.121262] tegra USB phy - inst[0] platform info:
[ 4.121265] port_otg: yes
[ 4.121267] has_hostpc: yes
[ 4.121270] phy_interface: USB_PHY_INTF_UTMI
[ 4.121273] op_mode: TEGRA_USB_OPMODE_DEVICE
[ 4.121276] qc2_voltage: 0
[ 4.121278] vbus_pmu_irq: 0
[ 4.121281] vbus_gpio: -1
[ 4.121284] charging: enabled
[ 4.121287] remote_wakeup: disabled
[ 4.124115] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
[ 4.160633] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
[ 4.160640] as3722-rtc as3722-rtc.1: RTC interrupt 449
[ 4.214969] i2c /dev entries driver
[ 4.216221] virtual_init
[ 4.218305] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
[ 4.219137] tegra_dtv_probe: probing dtv.
[ 4.219497] setup_stream: bufsize = 4096, bufnum = 4
[ 4.219498] ar0832_init: ++
[ 4.219864] i2c-core: driver [max77387] using legacy suspend method
[ 4.219867] i2c-core: driver [max77387] using legacy resume method
[ 4.219917] i2c-core: driver [as364x] using legacy suspend method
[ 4.219919] i2c-core: driver [as364x] using legacy resume method
[ 4.220151] [IMX135] sensor driver loading
[ 4.220202] [IMX179] sensor driver loading
[ 4.220252] [IMX185] sensor driver loading
[ 4.220300] [imx132] sensor driver loading
[ 4.220348] [AR0330] sensor driver loading
[ 4.220396] [ar0261] sensor driver loading
[ 4.220443] [AR1335] sensor driver loading
[ 4.220490] [ov4689] sensor driver loading
[ 4.221363] usbcore: registered new interface driver uvcvideo
[ 4.221366] USB Video Class driver (1.1.1)
[ 4.222269] zram: Created 1 device(s) …
[ 4.223513] tegra_wdt tegra_wdt.0: last reset is due to power on reset
[ 4.223683] WDT heartbeat enabled on probe
[ 4.223686] tegra_wdt_probe done
[ 4.224014] sdhci: Secure Digital Host Controller Interface driver
[ 4.224017] sdhci: Copyright(c) Pierre Ossman
[ 4.224020] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.224405] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
[ 4.224566] sdhci-tegra sdhci-tegra.3: Speedo value 2196
[ 4.224574] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
[ 4.273108] otg state changed: SUSPEND → PERIPHERAL
[ 4.402124] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.262867] handle_check_edid_l: audio_switch 1
[ 5.271761] Display connected, hpd_switch 1
[ 5.280286] handle_check_edid_l: setting audio and infoframes
[ 5.290429] tegradc tegradc.1: hdmi: can’t set audio to 44100 at 154012000 pix_clock
[ 5.302680] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
[ 5.316399] hdmi_state_machine_worker (tid edb0c580): state 4 (Enabled), hpd 1, pending_hpd_evt 1
[ 5.329920] hdmi_state_machine_handle_hpd_l: ignoring bouncing hpd
[ 5.341188] mmc0: no vqmmc regulator found
[ 5.350021] mmc0: no vmmc regulator found
[ 5.358646] mmc0: Invalid maximum block size, assuming 512 bytes
[ 5.369284] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
[ 5.403108] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
[ 5.420670] sdhci-tegra sdhci-tegra.2: Speedo value 2196
[ 5.430872] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
[ 5.445422] mmc1: no vqmmc regulator found
[ 5.454521] mmc1: no vmmc regulator found
[ 5.463424] mmc1: Invalid maximum block size, assuming 512 bytes
[ 5.474387] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found
[ 5.508108] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
[ 5.525406] mmc0: BKOPS_EN bit is not set
[ 5.534599] gpio wake56 for gpio=170
[ 5.547408] tegra-se tegra12-se: tegra_se_probe: complete
[ 5.548110] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
[ 5.548119] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
[ 5.582226] usbcore: registered new interface driver usbhid
[ 5.592899] usbhid: USB HID core driver
[ 5.602210] tegra-hier-ictlr tegra-hier-ictlr: probed
[ 6.000716] usbcore: registered new interface driver snd-usb-audio
[ 6.012558] MAX98090 driver built on Mar 16 2016 at 10:14:50
[ 6.023995] tegra_offload_platform probe successfull.
[ 6.031963] succefully registered offload opstegra30_avp_audio_platform_probe successful.[ 6.095762] Auto tuning windows***
[ 6.106138] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 6.116933] win[0]: 0(0) - 73(1)
[ 6.125455] win[1]: 80(0) - 160(1)
[ 6.134142] win[2]: 167(0) - 248(1)
[ 6.142905] ***************************************
[ 6.153130] ***tuning windows after inserting holes
[ 6.164262] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 6.175169] win[0]:-7(0) - 46(2)
[ 6.183810] win[1]:48(2) - 73(1)
[ 6.192361] win[2]:80(0) - 133(2)
[ 6.200909] win[3]:135(2) - 160(1)
[ 6.209527] win[4]:167(0) - 220(2)
[ 6.218103] win[5]:222(2) - 248(1)
[ 6.226658] ***********************************************
[ 6.237427] *Tuning values
[ 6.246841] estimated values
[ 6.255194] T2T_Vmax 59, T2T_Vmin 82, 1’st_hole_Vmax 45, UI_Vmax 84
[ 6.266646] Calculated values
[ 6.275115] T2T_Vmax 57, 1’st_hole_Vmax 47, UI_Vmax 87
[ 6.285465] T2T_Vmin 57, 1’st_hole_Vmin 47, UI_Vmin 87
[ 6.295794] ***********************************
[ 6.305544] *final tuning windows
[ 6.307741] rt5639 0-001c: read 0xfd=0x6
[ 6.322531] rt5639 0-001c: ASoC: mux INR Mux has no paths
[ 6.322546] rt5639 0-001c: ASoC: mux INL Mux has no paths
[ 6.323274] gpio wake49 for gpio=143
[ 6.355096] win[0]: 10 - 37
[ 6.368667] win[1]: 58 - 56
[ 6.376794] win[2]: 97 - 118
[ 6.384962] win[3]: 151 - 143
[ 6.393180] win[4]: 184 - 199
[ 6.401373] win[5]: 244 - 231
[ 6.409513] ********************************
[ 6.418942] best tap win - (10-37), best tap value 24 prev_best_tap 0
[ 6.986321] Auto tuning windows***
[ 6.996678] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 7.007387] win[0]: 0(0) - 73(1)
[ 7.015816] win[1]: 80(0) - 160(1)
[ 7.024321] win[2]: 168(0) - 248(1)
[ 7.032836] ***************************************
[ 7.042750] ***tuning windows after inserting holes
[ 7.053484] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 7.063963] win[0]:-7(0) - 46(2)
[ 7.072147] win[1]:48(2) - 73(1)
[ 7.080302] win[2]:80(0) - 133(2)
[ 7.088505] win[3]:135(2) - 160(1)
[ 7.096721] win[4]:168(0) - 220(2)
[ 7.104849] win[5]:222(2) - 248(1)
[ 7.112905] ***********************************************
[ 7.123140] *Tuning values
[ 7.132019] estimated values
[ 7.139854] T2T_Vmax 59, T2T_Vmin 82, 1’st_hole_Vmax 45, UI_Vmax 84
[ 7.150781] Calculated values
[ 7.158664] T2T_Vmax 57, 1’st_hole_Vmax 47, UI_Vmax 87
[ 7.168347] T2T_Vmin 57, 1’st_hole_Vmin 47, UI_Vmin 87
[ 7.177960] ***********************************
[ 7.186937] *final tuning windows
[ 7.196370] win[0]: 10 - 37
[ 7.203541] win[1]: 58 - 56
[ 7.210669] win[2]: 97 - 118
[ 7.217774] win[3]: 151 - 143
[ 7.224884] win[4]: 185 - 199
[ 7.231924] win[5]: 244 - 231
[ 7.238937] ********************************
[ 7.247257] best tap win - (10-37), best tap value 24 prev_best_tap 24
[ 7.257885] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 24
[ 7.274057] mmc0: new HS200 MMC card at address 0001
[ 7.283447] mmcblk mmc0:0001: Card claimed for testing.
[ 7.293170] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
[ 7.302034] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[ 7.314518] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 7.326111] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814
[ 7.338128] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0
[ 7.412951] rt5639 0-001c: rt5639_headset_detect jack_type = 2
[ 7.423148] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok
[ 7.436024] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok
[ 7.449720] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok
[ 7.462294] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok
[ 7.474759] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok
[ 7.486781] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
[ 7.498256] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
[ 7.509566] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
[ 7.523501] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok
[ 7.535318] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
[ 7.546893] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
[ 7.558519] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
[ 7.572149] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok
[ 7.587727] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0
[ 7.602433] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found
[ 7.611959] oprofile: using timer interrupt.
[ 7.625122] GACT probability NOT on
[ 7.632917] Mirror/redirect action on
[ 7.640858] u32 classifier
[ 7.647882] Actions configured
[ 7.655566] Netfilter messages via NETLINK v0.30.
[ 7.664656] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.675519] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 7.686875] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 7.697470] xt_time: kernel timezone is -0000
[ 7.706565] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.716497] arp_tables: (C) 2002 David S. Miller
[ 7.725654] TCP: cubic registered
[ 7.733671] NET: Registered protocol family 10
[ 7.743517] mip6: Mobile IPv6
[ 7.751119] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.761309] sit: IPv6 over IPv4 tunneling driver
[ 7.771579] NET: Registered protocol family 17
[ 7.780717] NET: Registered protocol family 15
[ 7.789837] NET: Registered protocol family 35
[ 7.798924] NET: Registered protocol family 37
[ 7.807839] NET: Registered protocol family 41
[ 7.818047] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 7.854191] Registering SWP/SWPB emulation handler
[ 7.863604] last reset is due to power on reset
[ 7.863604]
[ 7.878606] Disabling clocks left on by bootloader:
[ 7.887978] audio_2x
[ 7.894929] audio
[ 7.901575] audio4
[ 7.908296] audio3
[ 7.915035] audio2
[ 7.921726] audio1
[ 7.928400] audio0
[ 7.935137] hdmi_audio
[ 7.942092] entropy
[ 7.948760] dsi2-fixed
[ 7.955657] dsi1-fixed
[ 7.962510] nor
[ 7.968669] trace
[ 7.975000] sdmmc4_ddr
[ 7.981756] sdmmc3_ddr
[ 7.988493] cclk_lp
[ 7.994893] pll_x_out0
[ 8.001585] pll_m_out1
[ 8.008376] tegra_dvfs: vdd_cpu connected to regulator
[ 8.017679] tegra_dvfs: vdd_core connected to regulator
[ 8.027146] tegra_dvfs: vdd_gpu connected to regulator
[ 8.037744] cpu_cold cooling device is registered
[ 8.046796] cpu_hot cooling device is registered
[ 8.046861] Tegra CPU DFLL is initialized with use_dfll = 1
[ 8.046927] CPU rate: 696 MHz
[ 8.232316] tegra dvfs: tegra sysfs cap interface is initialized
[ 8.242438] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[ 8.253604] tegra_actmon.emc: Completed initialization (0)
[ 8.263524] tegra_actmon.avp: Completed initialization (0)
[ 8.273182] tegra_mon.cpu_emc: Completed initialization (0)
[ 8.286005] reg-aon-1v2: incomplete constraints, leaving on
[ 8.295540] reg-aon-1v8: incomplete constraints, leaving on
[ 8.305028] sdmmc-en-supply: incomplete constraints, leaving on
[ 8.314839] reg-dcdc-1v2: incomplete constraints, leaving on
[ 8.324394] reg-5v0-supply: incomplete constraints, leaving on
[ 8.334177] usb0-vbus: incomplete constraints, leaving on
[ 8.343534] vpp-fuse: incomplete constraints, leaving on
[ 8.352814] vdd-2v7-cam: incomplete constraints, leaving on
[ 8.362367] avdd-spi: incomplete constraints, leaving on
[ 8.371705] vdd-1v1-cam: incomplete constraints, leaving on
[ 8.381303] vddio-sdmmc-2: incomplete constraints, leaving on
[ 8.391028] vdd-1v2-cam: incomplete constraints, leaving on
[ 8.400555] avdd-cam: incomplete constraints, leaving on
[ 8.409865] vdd-cam: incomplete constraints, leaving on
[ 8.419082] as3722-sd3: incomplete constraints, leaving on
[ 8.428554] vdd-3v3-aon: incomplete constraints, leaving on
[ 8.438057] vdd-ac-bat: incomplete constraints, leaving on
[ 8.447413] regulator-dummy: incomplete constraints, leaving on
[ 8.457963] gpio wake51 for gpio=128
[ 8.465652] input: gpio-keys.3 as /devices/platform/gpio-keys.3/input/input1
[ 8.477549] as3722-rtc as3722-rtc.1: setting system clock to 2016-03-16 07:52:32 UTC (1458114752)
[ 8.491315] ALSA device list:
[ 8.498175] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[ 8.507497] #1: tegra-rt5639
[ 8.515620] EXT4-fs (mmcblk0p1): couldn’t mount as ext3 due to feature incompatibilities
[ 8.528321] EXT4-fs (mmcblk0p1): couldn’t mount as ext2 due to feature incompatibilities
[ 8.548800] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.560990] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 8.574044] devtmpfs: mounted
[ 8.581470] Freeing unused kernel memory: 512K (c0b50000 - c0bd0000)
[ 8.853696] init: plymouth-upstart-bridge main process (119) terminated with status 1
[ 8.866147] init: plymouth-upstart-bridge main process ended, respawning
[ 8.922026] init: plymouth-upstart-bridge main process (130) terminated with status 1
[ 8.934248] init: plymouth-upstart-bridge main process ended, respawning
[ 8.950188] init: ureadahead main process (122) terminated with status 5
[ 8.993465] init: plymouth-upstart-bridge main process (135) terminated with status 1
[ 9.005945] init: plymouth-upstart-bridge main process ended, respawning
[ 11.269363] systemd-udevd[346]: could not open moddep file ‘/lib/modules/3.10.40-gc80d685/modules.dep.bin’
- Starting Mount filesystems on boot[ OK ]
- Starting Signal sysvinit that the rootfs is mounted[ OK ]
- Starting Clean /tmp directory[ OK ]
- Starting Populate and link to /run filesystem[ OK ]
- Stopping Populate and link to /run filesystem[ OK ]
- Stopping Clean /tmp directory[ OK ]
- Stopping Track if upstart is running in a container[ OK ]
- Starting Initialize or finalize resolvconf[ OK ]
- Starting set console keymap[ OK ]
- Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- Stopping set console keymap[ OK ]
- Starting Signal sysvinit that local filesystems are mounted[ OK ]
- Starting Bridge udev events into upstart[ OK ]
- Starting Signal sysvinit that remote filesystems are mounted[ OK ]
- Stopping Mount filesystems on boot[ OK ]
- Starting NFSv4 id <-> name mapper[ OK ]
- Starting device node and kernel event manager[ OK ]
- Starting flush early job output to logs[ OK ]
- Starting D-Bus system message bus[ OK ]
- Starting NVIDIA specific init script[ OK ]
- Starting load modules from /etc/modules[ OK ]
- Starting cold plug devices[ OK ]
- Starting log initial device creation[ OK ]
- Stopping flush early job output to logs[ OK ]
- Stopping load modules from /etc/modules[ OK ]
- Starting SystemD login management service[ OK ]
- Starting system logging daemon[ OK ]
- Stopping cold plug devices[ OK ]
- Stopping rpcsec_gss daemon[ OK ]
- Stopping NVIDIA specific init script[ OK ]
- Stopping log initial device creation[ OK ]
- Stopping NVIDIA specific first-boot script[ OK ]
- Starting configure network device security[ OK ]
- Starting configure network device security[ OK ]
- Starting enable remaining boot-time encrypted block devices[ OK ]
- Starting configure network device[ OK ]
- Starting userspace bootsplash[ OK ]
- Starting CUPS printing spooler/server[ OK ]
- Starting Send an event to indicate plymouth is up[ OK ]
- Starting mDNS/DNS-SD daemon[ OK ]
- Stopping userspace bootsplash[ OK ]
- Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- Stopping Send an event to indicate plymouth is up[ OK ]
- Starting early crypto disks… [ OK ]
- Starting System V initialisation compatibility[ OK ]
- Starting modem connection manager[ OK ]
- Starting configure network device security[ OK ]
- Starting cups-browsed - Bonjour remote printer browsing daemon[ OK ]
- Starting configure virtual network devices[ OK ]
- Setting up X socket directories… [ OK ]
- Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- Starting network connection manager[ OK ]
- Stopping System V initialisation compatibility[ OK ]
- speech-dispatcher disabled; edit /etc/default/speech-dispatcher
- Starting NTP server ntpd [ OK ]
saned disabled; edit /etc/default/saned
- Starting System V runlevel compatibility[ OK ]
- Starting OpenSSH server[ OK ]
- Starting regular background program processing daemon[ OK ]
- Starting anac(h)ronistic cron[ OK ]
- Starting save kernel messages[ OK ]
- Starting crash report submission daemon[ OK ]
- Stopping System V runlevel compatibility[ OK ]
- Stopping save kernel messages[ OK ]
Ubuntu 14.04.1 LTS tegra-ubuntu ttyS0
tegra-ubuntu login: ubuntu (automatic login)
Last login: Wed Mar 16 07:51:11 UTC 2016 on ttyS0
Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.40-gc80d685 armv7l)
0 packages can be updated.
0 updates are security updates.
ubuntu@tegra-ubuntu:~$
ubuntu@tegra-ubuntu:~$
ubuntu@tegra-ubuntu:~$