How to change HDMI to DP on R28.1

Hi, WayneWWW,

Here are the log :

1: primary kernel
Retrieving file: /boot/initrd
0 bytes read in 59 ms (0 Bytes/s)
Retrieving file: /boot/Image
20902448 bytes read in 526 ms (37.9 MiB/s)
append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=04229170493060008000 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange root=/dev/mmcblk0p1 rw rootwait

Flattened Device Tree blob at 83100000

Booting using the fdt blob at 0x83100000
reserving fdt memory region: addr=80000000 size=20000
Using Device Tree in place at 0000000083100000, end 00000000831affa7

Starting kernel …

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.38 (tonie@TonieDesktop) (gcc version 4.8.2 (GCC) ) #45 SMP PREEMPT Wed Jan 24 18:09:04 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] Reserved memory: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] Reserved memory: initialized node ramoops_carveout, compatible id nvidia,ramoops
[ 0.000000] cma: Reserved 16 MiB at 0x00000000fdc00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc0ffe40000 s31360 r8192 d30080 u69632
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027072
[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=04229170493060008000 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange root=/dev/mmcblk0p1 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3372628K/4173824K available (11013K kernel code, 1808K rwdata, 6276K rodata, 1208K init, 644K bss, 96684K reserved, 704512K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc2000000 - 0xffffffbdc6000000 ( 64 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB)
[ 0.000000] .init : 0xffffffc001163000 - 0xffffffc001291000 ( 1208 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc001162c04 ( 17292 KB)
[ 0.000000] .data : 0xffffffc0012ab000 - 0xffffffc00146f230 ( 1809 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[ 0.000000] enable_t210_agic_clks:106 ape clocked & reset cleared
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001765] Console: colour dummy device 80x25
[ 0.002638] console [tty0] enabled
[ 0.002670] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.002707] pid_max: default: 32768 minimum: 301
[ 0.002793] Security Framework initialized
[ 0.002814] SELinux: Initializing.
[ 0.002922] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002947] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003608] Initializing cgroup subsys freezer
[ 0.003639] Initializing cgroup subsys debug
[ 0.003904] CPU0 ipc=1024
[ 0.003938] CPU1 ipc=1024
[ 0.003970] CPU2 ipc=1024
[ 0.004002] CPU3 ipc=1024
[ 0.004069] ASID allocator initialised with 65536 entries
[ 0.027288] tegra-id: chipid=22117.
[ 0.027319] tegra-id: opt_subrevision=0.
[ 0.027350] Tegra Speedo/IDDQ fuse revision 4
[ 0.027370] Tegra: CPU Speedo ID 7, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.027391] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
[ 0.027412] Tegra: CPU Speedo Value 2006, SoC Speedo Value 1940, GPU Speedo Value 2024
[ 0.027439] Tegra: CPU IDDQ Value 1752, SoC IDDQ Value 2172, GPU IDDQ Value 2550
[ 0.027482] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 SoC Process: 0
[ 0.028922] DTS File Name: …/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
[ 0.028967] DTB Build time: Jan 24 2018 17:36:57
[ 0.044795] CPU1: Booted secondary processor [411fd071]
[ 0.056763] CPU2: Booted secondary processor [411fd071]
[ 0.068761] CPU3: Booted secondary processor [411fd071]
[ 0.068846] Brought up 4 CPUs
[ 0.068913] SMP: Total of 4 processors activated.
[ 0.068936] CPU: All CPU(s) started at EL2
[ 0.068978] alternatives: patching kernel code
[ 0.071385] devtmpfs: initialized
[ 0.144555] Initilizing CustomIPI irq domain
[ 0.144906] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.158238] pinctrl core: initialized pinctrl subsystem
[ 0.158468] OS set in device tree is L4T.
[ 0.158866] regulator-dummy: no parameters
[ 0.159086] Initializing plugin-manager
[ 0.159155] Plugin module not found
[ 0.160132] node /plugin-manager/fragement@0 match with board >=2180-1000-300
[ 0.160989] node /plugin-manager/fragement@4 match with odm-data l4t
[ 0.161119] Removing Prop nvidia,pmc-wakeup from target /bcmdhd_wlan
[ 0.161637] Adding domain ape-pd to PM domain mc-clk-pd
[ 0.161681] Adding domain adsp-pd to PM domain ape-pd
[ 0.167062] NET: Registered protocol family 16
[ 0.168921] console [pstore-1] enabled
[ 0.168943] pstore: Registered ramoops as persistent store backend
[ 0.168966] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.180236] cpuidle: using governor ladder
[ 0.192227] cpuidle: using governor menu
[ 0.192587] bpmp: mail init ok
[ 0.193717] vdso: 2 pages (1 code @ ffffffc0012b1000, 1 data @ ffffffc0012b0000)
[ 0.193775] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.196126] atomic_pool_init():526: DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.197087] tegra_powergate_init: DONE
[ 0.197127] DTS File Name: …/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
[ 0.197173] DTB Build time: Jan 24 2018 17:36:57
[ 0.198196] Error: Driver ‘tegra-mc’ is already registered, aborting…
[ 0.199908] platform tegra-carveouts: SMMU isn’t ready yet
[ 0.200697] platform tegra-carveouts: domain=ffffffc0fa10f318 allocates as[0]=ffffffc0fa1440a8
[ 0.200768] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.201009] platform smmu_test: domain=ffffffc0fa10f618 allocates as[0]=ffffffc0fa144110
[ 0.201346] platform 70016000.bpmp: domain=ffffffc0fa10f918 allocates as[0]=ffffffc0fa144178
[ 0.202073] bpmp: ping status is 0
[ 0.202181] bpmp 70016000.bpmp: firmware tag is 1e4b302fc0f866f97885165cf8b395ac
[ 0.202440] bpmp 70016000.bpmp: probe ok
[ 0.203115] mc: mapped MMIO address: 0xffffff800007e000 → 0x70019000
[ 0.203223] mc: mapped MMIO address: 0xffffff80000b6000 → 0x7001c000
[ 0.203328] mc: mapped MMIO address: 0xffffff80000dc000 → 0x7001d000
[ 0.203418] mc-err: Set intmask: 0x23d40
[ 0.215459] GPIO line 58 (wlan-default-input-h2) hogged as input
[ 0.215508] GPIO line 65 (wlan-default-input-i1) hogged as input
[ 0.215555] GPIO line 56 (wlan-default-output-high-h0) hogged as output/high
[ 0.215596] GPIO line 64 (wlan-default-output-high-i0) hogged as output/high
[ 0.215639] GPIO line 148 (cam0-rst) hogged as output/low
[ 0.215677] GPIO line 151 (cam0-pwdn) hogged as output/low
[ 0.215714] GPIO line 149 (cam1-rst) hogged as output/low
[ 0.215752] GPIO line 152 (cam1-pwdn) hogged as output/low
[ 0.215871] gpiochip_add_data: registered GPIOs 0 to 255 on device: tegra-gpio
[ 0.218462] platform 70006000.serial: domain=ffffffc0fa1a0e18 allocates as[0]=ffffffc0fa1441e0
[ 0.219631] platform sound: domain=ffffffc0fa208718 allocates as[0]=ffffffc0fa144248
[ 0.222171] platform tegradc.0: domain=ffffffc0fa20e918 allocates as[0]=ffffffc0fa1442b0
[ 0.222784] platform tegradc.0: IOVA linear map 0x00000000c6000000(2a000000)
[ 0.223198] platform tegradc.1: domain=ffffffc0fa20ec18 allocates as[0]=ffffffc0fa144318
[ 0.223806] platform tegradc.1: IOVA linear map 0x00000000c6000000(2a000000)
[ 0.226849] platform 57000000.gpu: domain=ffffffc0fa21b118 allocates as[0]=ffffffc0fa144380
[ 0.226928] platform 57000000.gpu: domain=ffffffc0fa21b118 allocates as[1]=ffffffc0fa1443e8
[ 0.227001] platform 57000000.gpu: domain=ffffffc0fa21b118 allocates as[2]=ffffffc0fa144450
[ 0.227069] platform 57000000.gpu: domain=ffffffc0fa21b118 allocates as[3]=ffffffc0fa1444b8
[ 0.227866] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[ 0.227910] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.227934] tegra-pmc: ### PMC reset source: Power on reset
[ 0.227955] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.228338] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.228371] tegra-pmc: Clear bootloader IO dpd settings
[ 0.232335] tegra-pmc 7000e400.pmc: PMC: IO pad audio voltage is 1800000
[ 0.236319] tegra-pmc 7000e400.pmc: PMC: IO pad cam voltage is 1800000
[ 0.240317] tegra-pmc 7000e400.pmc: PMC: IO pad dbg voltage is 1800000
[ 0.244317] tegra-pmc 7000e400.pmc: PMC: IO pad dmic voltage is 1800000
[ 0.244346] tegra-pmc 7000e400.pmc: PMC: IO pad pex-ctrl voltage is 1800000
[ 0.248316] tegra-pmc 7000e400.pmc: PMC: IO pad spi voltage is 1800000
[ 0.252317] tegra-pmc 7000e400.pmc: PMC: IO pad uart voltage is 1800000
[ 0.256320] tegra-pmc 7000e400.pmc: PMC: IO pad audio-hv voltage is 1800000
[ 0.256349] tegra-pmc 7000e400.pmc: PMC: IO pad spi-hv voltage is 1800000
[ 0.260317] tegra-pmc 7000e400.pmc: PMC: IO pad gpio voltage is 1800000
[ 0.264315] tegra-pmc 7000e400.pmc: PMC: IO pad sdmmc3 voltage is 1800000
[ 0.264342] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.264414] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[ 0.267608] platform 1003000.pcie-controller: domain=ffffffc0fa2c8218 allocates as[0]=ffffffc0fa144520
[ 0.269990] platform sdhci-tegra.3: domain=ffffffc0fa2cf318 allocates as[0]=ffffffc0fa144588
[ 0.270617] platform sdhci-tegra.0: domain=ffffffc0fa2cf718 allocates as[0]=ffffffc0fa1445f0
[ 0.276287] vdd-ac-bat: 5000 mV
[ 0.277527] vdd-cpu-fixed: 1000 mV
[ 0.281465] irq: no irq domain found for /soctherm@0x700E2000 !
[ 0.281819] irq: no irq domain found for /soctherm@0x700E2000 !
[ 0.305439] ACPI: Interpreter disabled.
[ 0.306284] SCSI subsystem initialized
[ 0.306586] usbcore: registered new interface driver usbfs
[ 0.306664] usbcore: registered new interface driver hub
[ 0.306770] usbcore: registered new device driver usb
[ 0.310105] gpiochip_add_data: registered GPIOs 496 to 511 on device: tca9539
[ 0.311598] gpiochip_add_data: registered GPIOs 480 to 495 on device: tca9539
[ 0.314730] max77620 4-003c: PMIC Version OTP:0x3C and ES:0x8
[ 0.316521] GPIO line 474 (spmic-default-output-high) hogged as output/high
[ 0.316643] gpiochip_add_data: registered GPIOs 472 to 479 on device: max77620-gpio
[ 0.320352] vdd-core: 600 <–> 1400 mV at 1125 mV
[ 0.324344] vddio-ddr: at 1125 mV
[ 0.325208] vdd-pre-reg: 1350 mV
[ 0.328221] vdd-1v8: 1800 mV
[ 0.332221] avdd-sys: 1200 mV
[ 0.336221] vdd-pex: 1050 mV
[ 0.336821] vddio-sdmmc1: 1800 <–> 3300 mV at 3300 mV
[ 0.337650] vdd-cam-hv: 2800 mV
[ 0.340221] vdd-rtc: 850 mV
[ 0.341055] avdd-ts-hv: 3300 mV
[ 0.341906] vdd-ts: 1800 mV
[ 0.344222] vdd-gen-pll-edp: 1050 mV
[ 0.348221] vdd-hdmi-dp: 1050 mV
[ 0.348874] max77620 4-003c: max77620 probe successful
[ 0.350858] media: Linux media interface: v0.10
[ 0.350932] Linux video capture interface: v2.00
[ 0.358646] tegra210-emc 7001b000.memory-controller: validated EMC DFS table
[ 0.358997] Advanced Linux Sound Architecture Driver Initialized.
[ 0.362313] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.362361] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.362440] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.362478] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.365444] regulator_get() failed for (dvfs,vdd-cpu), -19
[ 0.365472] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.368227] vdd-3v3: 3300 mV
[ 0.372221] max77620-gpio7: 1050 mV
[ 0.372556] lcd-bl-en: 1800 mV
[ 0.372859] en-vdd-sd: 3300 mV
[ 0.373542] en-vdd-cam: 1800 mV
[ 0.376221] vdd-sys-boost: 5000 mV
[ 0.376915] vdd-hdmi: 5000 mV
[ 0.377168] aux-3v3: 3300 mV
[ 0.377404] snsr_pm: 3300 mV
[ 0.380222] vdd-disp-3v0: 3000 mV
[ 0.380912] vdd-fan: 5000 mV
[ 0.381202] usb-vbus1: 5000 mV
[ 0.381879] en-vdd-ts-1v8: 1800 mV
[ 0.382546] en-vdd-ts-hv-3v3: 3300 mV
[ 0.383393] en-vdd-disp-3v3: 3300 mV
[ 0.384050] en-mdm-pwr-3v7: 3700 mV
[ 0.384922] en-vdd-disp-1v8: 1800 mV
[ 0.385602] en-vdd-cam-hv-2v8: 2800 mV
[ 0.385900] rtl-5v0: 5000 mV
[ 0.386190] en-usb-vbus2: 5000 mV
[ 0.386851] en-vdd-cam-1v2: 1200 mV
[ 0.387144] en-vdd-vcm-2v8: 2800 mV
[ 0.389949] extcon-gpio-states extcon:extcon@1: Cable state 2
[ 0.391340] clocksource: Switched to clocksource arch_sys_counter
[ 0.431010] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.431427] dma_declare_coherent_resizable_cma_memory:290: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
[ 0.431614] cma: enabled page replacement for spfn=c6000, epfn=f0000
[ 0.431641] dma_declare_coherent_resizable_cma_memory:337: resizable cma heap=vpr create successful
[ 0.431672] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[ 0.431732] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[ 0.431769] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[ 0.432086] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.432800] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB)
[ 0.433555] pnp: PnP ACPI: disabled
[ 0.445477] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 0.447397] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 0.447822] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 0.448023] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.449667] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tdiode_tegra
[ 0.449929] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type PMIC-Die
[ 0.450161] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
[ 0.451312] isomgr_init(): iso emc max clk=1600000KHz
[ 0.451391] isomgr_init(): max_iso_bw=11520000KB
[ 0.451533] NET: Registered protocol family 2
[ 0.452097] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.452282] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.452554] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.452655] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.452718] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.452959] NET: Registered protocol family 1
[ 0.453276] RPC: Registered named UNIX socket transport module.
[ 0.453303] RPC: Registered udp transport module.
[ 0.453324] RPC: Registered tcp transport module.
[ 0.453344] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.453604] Trying to unpack rootfs image as initramfs…
[ 0.464962] host1x 50000000.host1x: initialized
[ 0.466702] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.470061] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.470185] audit: initializing netlink subsys (disabled)
[ 0.470243] audit: type=2000 audit(0.463:1): initialized
[ 0.482320] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.482810] fuse init (API version 7.23)
[ 0.485449] io scheduler noop registered (default)
[ 0.485481] io scheduler deadline registered
[ 0.485796] io scheduler cfq registered
[ 0.491363] tegra21x-padctl-uphy 7009f000.pinctrl: padctl mmio start 0x000000007009f000 end 0x000000007009ffff
[ 0.491410] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_SKU_CALIB_0 0x81ea412
[ 0.491445] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_USB_CALIB_EXT_0 0x4
[ 0.492932] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-0 is used by XUSB
[ 0.492966] tegra21x-padctl-uphy 7009f000.pinctrl: using UTMI port 0 for otg
[ 0.492994] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-2 is used by XUSB
[ 0.493032] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 5, set usb3_lanes = 0x20
[ 0.493076] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 1 maps to USB2 port 2
[ 0.493110] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-1 is used by XUSB
[ 0.493144] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 6, set usb3_lanes = 0x60
[ 0.493185] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 0 maps to USB2 port 1
[ 0.493230] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 1, set pcie_lanes = 0x2
[ 0.493277] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 2, set pcie_lanes = 0x6
[ 0.493324] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 3, set pcie_lanes = 0xe
[ 0.493370] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 4, set pcie_lanes = 0x1e
[ 0.493416] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 0, set pcie_lanes = 0x1f
[ 0.493464] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 7, set sata_lanes = 0x80
[ 0.493917] tegra21x-padctl-uphy 7009f000.pinctrl: mailbox is not ready yet
[ 0.494973] tegra-pwm 7000a000.pwm: PWM clk can sleep in ops
[ 0.496116] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 0.496886] Adding domain pcie-pd to PM domain mc-clk-pd
[ 0.501663] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[ 0.501733] tegra-pcie 1003000.pcie-controller: failed to get PHY: -517
[ 0.501759] tegra-pcie 1003000.pcie-controller: failed to get PHYs: -517
[ 0.505419] tsec 54500000.tsec: initialized
[ 0.506762] tsec 54100000.tsecb: initialized
[ 0.509787] nvdec 54480000.nvdec: initialized
[ 0.515092] falcon 54340000.vic: initialized
[ 0.517019] falcon 544c0000.nvenc: initialized
[ 0.518203] falcon 54380000.nvjpg: initialized
[ 0.520271] DC OR NODE connected to /host1x/sor
[ 0.520296]
[ 0.520296] Tonie’s Msg : parse_dc_out_type id : 0
[ 0.520366]
[ 0.520366] tegra_primary_panel_get_dt_node /host1x/sor 0
[ 0.520400]
[ 0.520400] tegra_primary_panel_get_dt_node /host1x/sor 2
[ 0.520479] display board info: id 0xffff, fab 0x0
[ 0.520729] tegra_primary_panel_get_dt_node np_sor:sor np_panel:panel-a-edp-1080p-14-0
[ 0.520762] Tonie’s Msg : parse_dc_out_type out_type : 3
[ 0.520807]
[ 0.520807] Tonie’s Msg : of_dc_parse_platform_data dc_or_node_name /host1x/sor
[ 0.520857]
[ 0.520857] Tonie’s Msg : parse_dp_settings id : 0
[ 0.520916]
[ 0.520916] tegra_primary_panel_get_dt_node /host1x/sor 0
[ 0.520947]
[ 0.520947] tegra_primary_panel_get_dt_node /host1x/sor 2
[ 0.520976] display board info: id 0xffff, fab 0x0
[ 0.521197] tegra_primary_panel_get_dt_node np_sor:sor np_panel:panel-a-edp-1080p-14-0
[ 0.521249] parse_dp_settings: No lt-data node. Using default setting.
[ 0.521422] tegradc tegradc.0: DT parsed successfully
[ 0.521479] tegradc tegradc.0: Display dc.ffffff8000980000 registered with id=0
[ 0.521770]
[ 0.521770] Tonie’s Msg : tegra_get_panel_node_out_type_check id : 0
[ 0.521833]
[ 0.521833] tegra_primary_panel_get_dt_node /host1x/sor 0
[ 0.521865]
[ 0.521865] tegra_primary_panel_get_dt_node /host1x/sor 2
[ 0.521894] display board info: id 0xffff, fab 0x0
[ 0.522132] tegra_primary_panel_get_dt_node np_sor:sor np_panel:panel-a-edp-1080p-14-0
[ 0.522168]
[ 0.522168] Tonie’s Msg : sor_num = 0
[ 0.522964] tegradc tegradc.0: _tegra_dc_set_mode():MODE:720x480@82.220Hz pclk=37037000
[ 0.523756] tegradc tegradc.0: Tonie’s Msg : tegra_dc_probe.
[ 0.524037] tegradc tegradc.0: probed
[ 0.527815] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 0.528040] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1020000, vi_iso_bw=750000, max_bw=1020000
[ 0.532437] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 0.534534] tegra-adma 702e2000.adma: Tegra ADMA driver register 10 channels
[ 0.536194] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[ 0.536522] kfuse 7000fc00.kfuse: initialized
[ 0.538604] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 0.539684] clk_cbus_round_rate: no gbus parent
[ 0.539715] tegra_gpu_edp gpu_edp: unable to get max GPU freq
[ 0.540289] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 0.540323] vdd-cpu: 708 <–> 1322 mV at 708 mV
[ 0.540390] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[ 0.541638] vdd-gpu: applied init 1000000uV constraint
[ 0.541669] vdd-gpu: 710 <–> 1320 mV at 1000 mV
[ 0.541732] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[ 0.542144] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.542296] No Device Node present for smmu client: serial8250 !!
[ 0.542325] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 0.542363] No Device Node present for smmu client: serial8250 !!
[ 0.542388] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 0.543533] No Device Node present for smmu client: serial8250 !!
[ 0.543564] serial8250 serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 0.543612] No Device Node present for smmu client: serial8250 !!
[ 0.543638] serial8250 serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 0.544341] console [ttyS0] disabled
[ 0.544415] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 320, base_baud = 25500000) is a Tegra
[ 2.688728] console [ttyS0] enabled
[ 2.690099] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 321, base_baud = 0) is a TEGRA_UART
[ 2.690569] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 322, base_baud = 0) is a TEGRA_UART
[ 2.690914] serial-tegra 70006300.serial: RX in PIO mode
[ 2.691019] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 323, base_baud = 0) is a TEGRA_UART
[ 2.693114] Console: switching to colour frame buffer device 90x30
[ 2.697474] gk20a 57000000.gpu: platform probe failed
[ 2.704215] brd: module loaded
[ 2.775520] tegradc tegradc.0: fb registered
[ 2.782885] loop: module loaded
[ 2.785388]
[ 2.785388] Tonie’s Msg : prod_string prod_c_dpaux_dp
[ 2.800315] zram: Added device: zram0
[ 2.806278] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 2.816008] nct1008_nct72 0-004c: find device tree node, parsing dt
[ 2.824599] nct1008_nct72 0-004c: starting parse dt
[ 2.831801] nct1008_nct72 0-004c: success parsing dt
[ 2.839138] nct1008_nct72 0-004c: success in enabling tmp451 VDD rail
[ 2.882613] tmp451: Enabled overheat logging at 102.00C
[ 2.890164] nct1008_nct72 0-004c: nct1008_probe: initialized
[ 2.900783] THERMAL EST: found 2 subdevs
[ 2.906824] THERMAL EST num_resources: 0
[ 2.912824] [THERMAL EST subdev 0]
[ 2.918230] [THERMAL EST subdev 1]
[ 2.923868] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est
[ 2.936602] THERMAL EST: thz register success.
[ 2.943069] THERMAL EST: end of probe, return err: 0
[ 2.949947] tegra_profiler: Branch: Dev
[ 2.955536] tegra_profiler: Version: 1.109
[ 2.961317] tegra_profiler: Samples version: 37
[ 2.967495] tegra_profiler: IO version: 21
[ 2.973202] armv8_pmu: imp: 0x41, idcode: 0x1
[ 2.979170] armv8_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 2.987816] armv8_pmu: imp: 0x41, idcode: 0x1
[ 2.993857] armv8_pmu: [1] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.002567] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.008648] armv8_pmu: [2] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.017356] armv8_pmu: imp: 0x41, idcode: 0x1
[ 3.019426]
[ 3.019426] Tonie’s Msg : clock caculation div=2, out=3, rate=37036669
[ 3.021640] tegradc tegradc.0: Tonie’s Msg : tegra_dc_init
[ 3.021689] tegradc tegradc.0: tegra_dc_program_mode():MODE:720x480@82.220Hz pclk=37037000
[ 3.021713]
[ 3.021713] Tonie’s Msg : clock caculation div=2, out=3, rate=37036669
[ 3.021722] tegradc tegradc.0: nominal-pclk:37037000 parent:37036669 div:1.0 pclk:37036669 36666630~40370330
[ 3.021805] tegradc tegradc.0: Tonie’s Msg : edp: tegra_dc_dp_enable 0
[ 3.021811] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.022062] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_i2c_write
[ 3.026059] tegradc tegradc.0: _tegra_dc_set_mode():MODE:3840x1200@60.003Hz pclk=295246000
[ 3.026159]
[ 3.026159] Tonie’s Msg : clock caculation div=2, out=3, rate=295243359
[ 3.026165] tegradc tegradc.0: Tonie’s Msg : dp: tegra_dp_dpcd_init
[ 3.026980] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.027206] tegradc tegradc.0: dp: aux write retry (0x10010000) – 1
[ 3.028246] tegradc tegradc.0: dp: aux write retry (0x10010000) – 0
[ 3.029277] tegradc tegradc.0: dp: aux write got error (0x10010000)
[ 3.029282] tegradc tegradc.0: Tonie’s Msg : edp: tegra_dc_dp_enable 111
[ 3.029286]
[ 3.029286] Tonie’s Msg : tegra_dc_sor_enable_dp sor->dc->initialized 0
[ 3.032297]
[ 3.032297] Tonie’s Msg : tegra_sor_dp_cal
[ 3.032315] tegradc tegradc.0: Tonie’s Msg : dp: tegra_sor_config_dp_prods prod_c_dp err=0
[ 3.034613] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.035123] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.035660] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.036066] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.036289] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.036907]
[ 3.036907] Tonie’s Msg : clock caculation div=2, out=3, rate=295243359
[ 3.036933] dp lt: state 0 (Reset), hpd 1, pending_lt_evt 1
[ 3.036937] dp lt: switching from state 0 (Reset) to state 0 (Reset)
[ 3.036945] dp lt: state 0 (Reset), hpd 1, pending_lt_evt 0
[ 3.037255] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.037775] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.038119] dp lt: switching from state 0 (Reset) to state 2 (clock recovery)
[ 3.038127] dp lt: state 2 (clock recovery), hpd 1, pending_lt_evt 0
[ 3.038133] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.038349] sor0 dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.038357] sor0 dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.038366] sor0 dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.038374] sor0 dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.038421] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.039406] dp lt: CR done
[ 3.039411] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization)
[ 3.039419] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.039422] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.039427] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.040758] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.041063] Tonie’s Msg : lt: read dpcd[0] status 119
[ 3.041366] Tonie’s Msg : lt: read dpcd[1] status 119
[ 3.041672] tegradc tegradc.0: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.042145] dp lt: CE done
[ 3.042150] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass)
[ 3.042598] DC OR NODE connected to /host1x/sor1
[ 3.042601]
[ 3.042601] Tonie’s Msg : parse_dc_out_type id : 1
[ 3.042604]
[ 3.042604] tegra_secondary_panel_get_dt_node /host1x/sor1 0
[ 3.042652] tegra_secondary_panel_get_dt_node np_sor sor1 np_panel hdmi-display
[ 3.042655]
[ 3.042655] tegra_secondary_panel_get_dt_node /host1x/sor1 success
[ 3.042661] Tonie’s Msg : parse_dc_out_type out_type : 3
[ 3.042685]
[ 3.042685] Tonie’s Msg : of_dc_parse_platform_data dc_or_node_name /host1x/sor1
[ 3.042690]
[ 3.042690] Tonie’s Msg : parse_dp_settings id : 1
[ 3.042692]
[ 3.042692] tegra_secondary_panel_get_dt_node /host1x/sor1 0
[ 3.042721] tegra_secondary_panel_get_dt_node np_sor sor1 np_panel hdmi-display
[ 3.042723]
[ 3.042723] tegra_secondary_panel_get_dt_node /host1x/sor1 success
[ 3.042753] parse_dp_settings: No lt-data node. Using default setting.
[ 3.042865] tegradc tegradc.1: DT parsed successfully
[ 3.042907] tegradc tegradc.1: Display dc.ffffff8007400000 registered with id=1
[ 3.043730] tegradc tegradc.0: Tonie’s Msg : tegra_dc_update_mode mode_dirty 1
[ 3.043776] tegradc tegradc.0: tegra_dc_program_mode():MODE:3840x1200@60.003Hz pclk=295246000
[ 3.044391]
[ 3.044391] Tonie’s Msg : tegra_get_panel_node_out_type_check id : 1
[ 3.044394]
[ 3.044394] tegra_secondary_panel_get_dt_node /host1x/sor1 0
[ 3.044427] tegra_secondary_panel_get_dt_node np_sor sor1 np_panel hdmi-display
[ 3.044429]
[ 3.044429] tegra_secondary_panel_get_dt_node /host1x/sor1 success
[ 3.044438]
[ 3.044438] Tonie’s Msg : sor_num = 1
[ 3.045095]
[ 3.045095] Tonie’s Msg : clock caculation div=2, out=3, rate=295243359
[ 3.045105] tegradc tegradc.0: nominal-pclk:295246000 parent:295243359 div:1.0 pclk:295243359 292293540~321818140
[ 3.045276] tegradc tegradc.0: Tonie’s Msg : tegra_dc_update_mode mode_dirty 0
[ 3.048722] tegradc tegradc.1: _tegra_dc_set_mode():MODE:720x480@82.220Hz pclk=37037000
[ 3.049742] tegradc tegradc.1: Tonie’s Msg : tegra_dc_probe.
[ 3.050078] tegradc tegradc.1: probed
[ 3.052324] tegradc tegradc.0: Tonie’s Msg : tegra_dc_update_mode mode_dirty 0
[ 3.083104] tegradc tegradc.0: dp: unplug event received
[ 3.227918] tegradc tegradc.0: dp: plug event received
[ 3.752178] armv8_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[ 3.752579] tegra_profiler: auth: init
[ 3.753728] tegra-ahci 70027000.sata: Missing devslp-active state
[ 3.761664] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 3.776064] spi-tegra114 7000d400.spi: Static pin configuration used
[ 3.793091] tegradc tegradc.1: fb registered
[ 3.793444] spi-tegra114 7000da00.spi: Static pin configuration used
[ 3.809103] tun: Universal TUN/TAP device driver, 1.6
[ 3.810996]
[ 3.810996] Tonie’s Msg : prod_string prod_c_dpaux_dp
[ 3.812162]
[ 3.812162] Tonie’s Msg : clock caculation div=2, out=3, rate=37036523
[ 3.813885] tegradc tegradc.1: Tonie’s Msg : tegra_dc_init
[ 3.813942] tegradc tegradc.1: tegra_dc_program_mode():MODE:720x480@82.220Hz pclk=37037000
[ 3.813970]
[ 3.813970] Tonie’s Msg : clock caculation div=2, out=3, rate=37036523
[ 3.813978] tegradc tegradc.1: nominal-pclk:37037000 parent:37036523 div:1.0 pclk:37036523 36666630~40370330
[ 3.814034] tegradc tegradc.1: Tonie’s Msg : edp: tegra_dc_dp_enable 0
[ 3.814041] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.814347] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_i2c_write
[ 3.818347] tegradc tegradc.1: _tegra_dc_set_mode():MODE:3840x1200@60.003Hz pclk=295246000
[ 3.818454]
[ 3.818454] Tonie’s Msg : clock caculation div=2, out=3, rate=295243750
[ 3.818460] tegradc tegradc.1: Tonie’s Msg : dp: tegra_dp_dpcd_init
[ 3.819262] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.819489] tegradc tegradc.1: dp: aux write retry (0x10010000) – 1
[ 3.820518] tegradc tegradc.1: dp: aux write retry (0x10010000) – 0
[ 3.821543] tegradc tegradc.1: dp: aux write got error (0x10010000)
[ 3.821549] tegradc tegradc.1: Tonie’s Msg : edp: tegra_dc_dp_enable 111
[ 3.821554]
[ 3.821554] Tonie’s Msg : tegra_dc_sor_enable_dp sor->dc->initialized 0
[ 3.824567]
[ 3.824567] Tonie’s Msg : tegra_sor_dp_cal
[ 3.824590] tegradc tegradc.1: Tonie’s Msg : dp: tegra_sor_config_dp_prods prod_c_dp err=0
[ 3.826915] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.827427] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.827955] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.828360] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.828589] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.829143]
[ 3.829143] Tonie’s Msg : clock caculation div=2, out=3, rate=295243750
[ 3.829170] dp lt: state 0 (Reset), hpd 1, pending_lt_evt 1
[ 3.829175] dp lt: switching from state 0 (Reset) to state 0 (Reset)
[ 3.829182] dp lt: state 0 (Reset), hpd 1, pending_lt_evt 0
[ 3.829496] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.830015] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.830364] dp lt: switching from state 0 (Reset) to state 2 (clock recovery)
[ 3.830372] dp lt: state 2 (clock recovery), hpd 1, pending_lt_evt 0
[ 3.830378] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.830597] sor1 dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.830607] sor1 dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.830616] sor1 dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.830624] sor1 dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.830671] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.831655] dp lt: CR done
[ 3.831661] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization)
[ 3.831669] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.831672] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.831677] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.832964] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.833246] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.833250] dp lt: CE not done
[ 3.833815] dp lt: new config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833819] dp lt: new config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833822] dp lt: new config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833826] dp lt: new config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833835] sor1 dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833843] sor1 dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833852] sor1 dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833860] sor1 dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.833906] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.834142] dp lt: CE retry
[ 3.834148] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.834155] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.834158] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.835234] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.835519] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.835521] dp lt: CE not done
[ 3.836086] dp lt: new config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836090] dp lt: new config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836094] dp lt: new config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836097] dp lt: new config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836106] sor1 dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836114] sor1 dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836123] sor1 dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836131] sor1 dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0
[ 3.836177] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.836412] dp lt: CE retry
[ 3.836417] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.836425] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.836428] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.837502] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.837784] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.837786] dp lt: CE not done
[ 3.838361] dp lt: new config: lane 0: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838365] dp lt: new config: lane 1: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838368] dp lt: new config: lane 2: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838371] dp lt: new config: lane 3: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838380] sor1 dp lt: config: lane 0: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838389] sor1 dp lt: config: lane 1: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838397] sor1 dp lt: config: lane 2: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838406] sor1 dp lt: config: lane 3: vs level: 0, pe level: 3, pc2 level: 0
[ 3.838451] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.838688] dp lt: CE retry
[ 3.838693] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.838700] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.838703] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.839783] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.840065] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.840067] dp lt: CE not done
[ 3.840639] dp lt: new config: lane 0: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840642] dp lt: new config: lane 1: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840646] dp lt: new config: lane 2: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840649] dp lt: new config: lane 3: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840658] sor1 dp lt: config: lane 0: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840667] sor1 dp lt: config: lane 1: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840675] sor1 dp lt: config: lane 2: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840683] sor1 dp lt: config: lane 3: vs level: 0, pe level: 2, pc2 level: 0
[ 3.840730] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.840966] dp lt: CE retry
[ 3.840970] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.840977] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.840980] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.842056] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.842338] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.842341] dp lt: CE not done
[ 3.842904] dp lt: new config: lane 0: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842908] dp lt: new config: lane 1: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842912] dp lt: new config: lane 2: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842915] dp lt: new config: lane 3: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842924] sor1 dp lt: config: lane 0: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842933] sor1 dp lt: config: lane 1: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842942] sor1 dp lt: config: lane 2: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842951] sor1 dp lt: config: lane 3: vs level: 0, pe level: 2, pc2 level: 0
[ 3.842997] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.843234] dp lt: CE retry
[ 3.843238] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.843245] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.843248] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.844328] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.844610] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.844611] dp lt: CE not done
[ 3.845183] dp lt: new config: lane 0: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845187] dp lt: new config: lane 1: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845190] dp lt: new config: lane 2: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845193] dp lt: new config: lane 3: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845202] sor1 dp lt: config: lane 0: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845210] sor1 dp lt: config: lane 1: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845219] sor1 dp lt: config: lane 2: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845228] sor1 dp lt: config: lane 3: vs level: 0, pe level: 1, pc2 level: 0
[ 3.845275] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dpaux_write
[ 3.845511] dp lt: CE retry
[ 3.845516] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization)
[ 3.845523] dp lt: state 3 (channel equalization), hpd 1, pending_lt_evt 0
[ 3.845526] Tonie’s Msg : lt: lt_data->tps3_supported 0
[ 3.846600] Tonie’s Msg : lt: get_channel_eq_status n_lanes 4
[ 3.846881] Tonie’s Msg : lt: read dpcd[0] status 17
[ 3.846883] dp lt: CE not done
[ 3.846886] dp lt: CE retry limit 5 reached
[ 3.846890] dp lt: switching from state 3 (channel equalization) to state 6 (reduce bit rate)
[ 3.846897] dp lt: state 6 (reduce bit rate), hpd 1, pending_lt_evt 0
[ 3.846903] dp lt: bit rate already lowest
[ 3.846909] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.847421] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.847943] tegradc tegradc.1: Tonie’s Msg dp: tegra_dc_dp_dpcd_write
[ 3.848168] dp lt: switching from state 6 (reduce bit rate) to state 4 (link training fail/disable)
[ 5.077584] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 5.086401] PPP generic driver version 2.4.2
[ 5.092794] PPP BSD Compression module registered
[ 5.099455] PPP Deflate Compression module registered
[ 5.106555] PPP MPPE Compression module registered
[ 5.113416] NET: Registered protocol family 24
[ 5.120012] usbcore: registered new interface driver r8152
[ 5.127591] usbcore: registered new interface driver asix
[ 5.134977] usbcore: registered new interface driver ax88179_178a
[ 5.142970] usbcore: registered new interface driver cdc_ether
[ 5.150642] usbcore: registered new interface driver smsc95xx
[ 5.158134] usbcore: registered new interface driver net1080
[ 5.165504] usbcore: registered new interface driver cdc_subset
[ 5.173108] usbcore: registered new interface driver zaurus
[ 5.180368] usbcore: registered new interface driver cdc_ncm
[ 5.187784] usbcore: registered new interface driver usb-storage
[ 5.195439] usbcore: registered new interface driver usbserial
[ 5.202735] usbcore: registered new interface driver ftdi_sio
[ 5.209861] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 5.218599] usbcore: registered new interface driver option
[ 5.225569] usbserial: USB Serial support registered for GSM modem (1-port)
[ 5.234042] usbcore: registered new interface driver pl2303
[ 5.241180] usbserial: USB Serial support registered for pl2303
[ 5.250153] tegra-xudc-new 700d0000.xudc: usb2 phy is not available yet
[ 5.390730] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc1
[ 5.402143] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0
[ 5.410861] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 5.419184] i2c /dev entries driver
[ 5.426347] IR NEC protocol handler initialized
[ 5.432415] IR Sharp protocol handler initialized
[ 5.438633] IR XMP protocol handler initialized
[ 5.444751] usbcore: registered new interface driver uvcvideo
[ 5.452061] USB Video Class driver (1.1.1)
[ 5.458108] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 5.468894] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 5.477756] tegra_soctherm 700e2000.soctherm: pllx_offset tz:1 max:8, min:4
[ 5.487112] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 5.500120] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[ 5.513152] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[ 5.526762] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 5.540760] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[ 5.554522] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[ 5.568628] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 5.582998] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature 2147483647 forced to 127000
[ 5.597373] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[ 5.611822] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[ 5.623005] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 5.634725] tegra_aotag tegra-aotag: Registering sensor 0
[ 5.643119] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 5.651170] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 5.660469] FAN dev name: pwm-fan
[ 5.666640] FAN:gpio request success.
[ 5.673146] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 5.681883] pwm_fan_driver pwm-fan: unable to request PWM, trying legacy API
[ 5.691651] pwm_fan_driver pwm-fan: got pwm for fan
[ 5.699367] pwm_fan_driver pwm-fan: fan tach request irq success
[ 5.707934] pwm_fan_driver pwm-fan: tach period: 1000
[ 5.715559] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 5.725578] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 5.735701] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 5.745847] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 5.755883] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 5.765812] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 5.775625] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 5.785334] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 5.794922] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 5.804518] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 5.815222] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[ 5.826975] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[ 5.836886] device-mapper: uevent: version 1.0.3
[ 5.843464] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 5.859891] sdhci: Secure Digital Host Controller Interface driver
[ 5.867849] sdhci: Copyright(c) Pierre Ossman
[ 5.873920] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.882212] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
[ 5.888972] tegra-se 70012000.se: tegra_se_probe: complete
[ 5.889801] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.893266] usbcore: registered new interface driver usbhid
[ 5.893269] usbhid: USB HID core driver
[ 5.918579] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
[ 5.927934] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful
[ 5.938236] parse_throttle_dt_data: Num cap clks = 6
[ 5.945139] parse_throttle_dt_data: clk=cclk_g type=2
[ 5.952129] parse_throttle_dt_data: clk=gpu type=4
[ 5.958885] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 5.966990] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 5.971377] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr
[ 5.971741] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
[ 5.971763] sdhci-tegra sdhci-tegra.1: Client registration for eMC Successful
[ 6.007013] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 6.007370] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA 64-bit with 64 bit addr
[ 6.008086] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[ 6.008136] sdhci-tegra sdhci-tegra.0: Got WP GPIO
[ 6.008222] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
[ 6.008274] sdhci-tegra sdhci-tegra.0: wakeup init done, cd_irq: 262
[ 6.008295] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[ 6.010731] en-vdd-sd: supplied by vdd-3v3
[ 6.013969] mmc0: MAN_BKOPS_EN bit is not set
[ 6.021600] mmc0: Skipping tuning since strobe enabled
[ 6.027794] mmc0: new HS400 MMC card at address 0001
[ 6.028448] mmcblk0: mmc0:0001 016G32 14.7 GiB
[ 6.028658] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
[ 6.030006] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[ 6.051605] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[ 6.076467] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[ 6.139357] parse_throttle_dt_data: clk=emc type=3
[ 6.147031] tegra_throttle_probe: probe successful. #cdevs=4
[ 6.155182] tegra21x_actmon 6000c800.actmon: in actmon_register()…
[ 6.165299] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[ 6.179265] tegra124-dfll 70110000.clock: config PMU interface as PWM
[ 6.191818] No Device Node present for smmu client: snd-soc-dummy !!
[ 6.200331] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 6.214102] No Device Node present for smmu client: snd-soc-dummy !!
[ 6.222613] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 6.236940] No Device Node present for smmu client: snd-soc-dummy !!
[ 6.245673] snd-soc-dummy snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 6.260466] No Device Node present for smmu client: snd-soc-dummy !!
[ 6.269309] snd-soc-dummy snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 6.287970] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[ 6.306585] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
[ 6.318041] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
[ 6.328198] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
[ 6.338343] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
[ 6.360235] OPE platform probe
[ 6.365878] OPE platform probe successful
[ 6.372596] OPE platform probe
[ 6.378111] OPE platform probe successful
[ 6.386335] tegra-snd-t210ref-mobile-rt565x sound: Failed to get HP Det GPIO, should be handled by codec
[ 6.420100] mmc1 tuning done saved tap delay=44
[ 6.426864] mmc1: hw tuning done …
[ 6.432603] mmc1: tuning_window[0]: 0xf3ffffff
[ 6.434500] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 6.434727] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 6.434963] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 6.435191] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 6.435454] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 6.435688] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 6.435914] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 6.436141] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 6.436380] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 6.436610] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 6.530980] mmc1: tuning_window[1]: 0x3fffffff
[ 6.536613] mmc1: tuning_window[2]: 0xfffffffe
[ 6.542142] mmc1: tuning_window[3]: 0x7fffffe7
[ 6.547674] mmc1: tuning_window[4]: 0x0
[ 6.552599] mmc1: tuning_window[5]: 0x0
[ 6.557523] mmc1: tuning_window[6]: 0x0
[ 6.562360] mmc1: tuning_window[7]: 0x0
[ 6.567185] sdhci: Tap value: 44 | Trim value: 8
[ 6.572837] sdhci: SDMMC_VENDOR_INTR_STATUS[0x108]: 0x40000
[ 6.585174] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input1
[ 6.597698] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 6.598234] tegra-snd-t210ref-mobile-rt565x sound: codec-dai “dit-hifi” registered
[ 6.598240] tegra-snd-t210ref-mobile-rt565x sound: This is a dummy codec
[ 6.599036] GACT probability NOT on
[ 6.599047] Mirror/redirect action on
[ 6.599062] u32 classifier
[ 6.599064] Actions configured
[ 6.599075] Netfilter messages via NETLINK v0.30.
[ 6.599140] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.599579] ctnetlink v0.93: registering with nfnetlink.
[ 6.613387] xt_time: kernel timezone is -0000
[ 6.613531] ipip: IPv4 over IPv4 tunneling driver
[ 6.614176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.614317] arp_tables: (C) 2002 David S. Miller
[ 6.614385] Initializing XFRM netlink socket
[ 6.615208] NET: Registered protocol family 10
[ 6.621865] mip6: Mobile IPv6
[ 6.621893] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.622088] sit: IPv6 over IPv4 tunneling driver
[ 6.623176] NET: Registered protocol family 17
[ 6.623205] NET: Registered protocol family 15
[ 6.623243] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 6.623268] Key type dns_resolver registered
[ 6.625743] Registered cp15_barrier emulation handler
[ 6.633701] isp 54600000.isp: initialized
[ 6.635131] isp 54680000.isp: initialized
[ 6.639218] clk_cbus_recalc_rate: no gbus parent
[ 6.639225] clk_cbus_round_rate: no gbus parent
[ 6.639228] clk_cbus_round_rate: no gbus parent
[ 6.639236] clk_cbus_recalc_rate: no gbus parent
[ 6.639725] clk_cbus_recalc_rate: no gbus parent
[ 6.639731] clk_cbus_round_rate: no gbus parent
[ 6.639734] clk_cbus_round_rate: no gbus parent
[ 6.639740] clk_cbus_recalc_rate: no gbus parent
[ 6.639766] tegra_dvfs: GPU-cap: registered
[ 6.639855] tegra dvfs: vdd-cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
[ 6.639859] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
[ 6.639863] tegra dvfs: vdd-gpu: nominal 1120mV, offset 710000uV, step 10000uV, scaling enabled
[ 6.641699] tegra_dvfs: vdd-gpu-vts: registered
[ 6.643699] xhci-tegra 70090000.xusb: can’t get usb3-0 phy (-517)
[ 6.644382] tegra21x-padctl-uphy 7009f000.pinctrl: padctl mmio start 0x000000007009f000 end 0x000000007009ffff
[ 6.644394] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_SKU_CALIB_0 0x81ea412
[ 6.644401] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_USB_CALIB_EXT_0 0x4
[ 6.645821] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-0 is used by XUSB
[ 6.645831] tegra21x-padctl-uphy 7009f000.pinctrl: using UTMI port 0 for otg
[ 6.645839] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-2 is used by XUSB
[ 6.645854] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 5, set usb3_lanes = 0x20
[ 6.645872] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 1 maps to USB2 port 2
[ 6.645879] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-1 is used by XUSB
[ 6.645893] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 6, set usb3_lanes = 0x60
[ 6.645907] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 0 maps to USB2 port 1
[ 6.645924] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 1, set pcie_lanes = 0x2
[ 6.645946] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 2, set pcie_lanes = 0x6
[ 6.645965] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 3, set pcie_lanes = 0xe
[ 6.645984] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 4, set pcie_lanes = 0x1e
[ 6.646003] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 0, set pcie_lanes = 0x1f
[ 6.646024] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 7, set sata_lanes = 0x80
[ 6.646740] usb-vbus1: supplied by vdd-3v3
[ 6.649163] tegra21x-padctl-uphy 7009f000.pinctrl: Done tegra21x_padctl_uphy_probe
[ 6.651987] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[ 6.652222] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[ 6.652942] clk_cbus_round_rate: no gbus parent
[ 6.652949] tegra_gpu_edp gpu_edp: unable to get max GPU freq
[ 6.653320] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
[ 6.653537] tegra-ahci 70027000.sata: Missing devslp-active state
[ 6.654553] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
[ 6.654564] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst
[ 6.655448] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[ 6.655535] gk20a 57000000.gpu: GPCPLL initial settings: NA mode, M=1, N=34, P=3
[ 6.659997] scsi host0: tegra_ahci
[ 6.664555] scsi host1: tegra_ahci
[ 6.664799] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 372
[ 6.664803] ata2: DUMMY
[ 6.668982] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 6.669503] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 6.670133] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS ‘floor cooling device’ registered
[ 6.670825] tegra21x-padctl-uphy 7009f000.pinctrl: trying to assert IDDQ while XUSB partitions are on
[ 6.671902] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS ‘cap cooling device’ registered
[ 6.672342] tegra_dfll_action dfll-cdev-cap: Tegra DFLL ‘cap cooling device’ registered
[ 6.673001] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 6.673225] tegra_dfll_action dfll-cdev-floor: Tegra DFLL ‘floor cooling device’ registered
[ 6.676100] xhci-tegra 70090000.xusb: UTMI port 0 has OTG_CAP
[ 6.676102] xhci-tegra 70090000.xusb: No USB3 port has OTG_CAP
[ 6.679394] xhci-tegra 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
[ 6.679396] xhci-tegra 70090000.xusb: Falling back to user helper
[ 6.681442] input: gpio-keys as /devices/gpio-keys/input/input2
[ 6.713912] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421)
[ 6.714739] vi 54080000.vi: vi_probe: ++
[ 6.720517] vi 54080000.vi: initialized
[ 6.722913] vi 54080000.vi: all channel register failed
[ 6.723830] Disable partitions left on by BL
[ 6.723831] disb
[ 6.733491] DRAM derating cdev registered.
[ 6.734337] vdd-cpu-fixed: disabling
[ 6.734347] vdd-cam-hv: disabling
[ 6.734431] avdd-ts-hv: disabling
[ 6.734496] vdd-ts: disabling
[ 6.734559] max77620-gpio7: disabling
[ 6.734698] en-vdd-cam: disabling
[ 6.734701] aux-3v3: disabling
[ 6.734702] snsr_pm: disabling
[ 6.734704] vdd-disp-3v0: disabling
[ 6.734707] vdd-fan: disabling
[ 6.734708] usb-vbus1: disabling
[ 6.734710] en-vdd-ts-1v8: disabling
[ 6.734712] en-vdd-ts-hv-3v3: disabling
[ 6.734714] en-mdm-pwr-3v7: disabling
[ 6.734716] en-vdd-cam-hv-2v8: disabling
[ 6.734718] rtl-5v0: disabling
[ 6.734719] en-usb-vbus2: disabling
[ 6.734721] en-vdd-cam-1v2: disabling
[ 6.734722] en-vdd-vcm-2v8: disabling
[ 6.735589] ALSA device list:
[ 6.735591] #0: tegra-hda at 0x70038000 irq 350
[ 6.735592] #1: tegra-snd-t210ref-mobile-rt565x
[ 6.991361] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.079956] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 7.351461] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 7.352513] EXT4-fs (mmcblk0p1): couldn’t mount as ext3 due to feature incompatibilities
[ 7.352720] EXT4-fs (mmcblk0p1): couldn’t mount as ext2 due to feature incompatibilities
[ 7.462019] EXT4-fs (mmcblk0p1): recovery complete
[ 7.468704] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.478030] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 7.485812] devtmpfs: mounted
[ 7.489795] Freeing unused kernel memory: 1208K (ffffffc001163000 - ffffffc001291000)
[ 7.498441] Freeing alternatives memory: 76K (ffffffc001291000 - ffffffc0012a4000)
[ 7.519254] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 7.563122] systemd[1]: System time before build time, advancing clock.
[ 7.584850] random: systemd: uninitialized urandom read (16 bytes read, 82 bits of entropy available)
[ 7.597430] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +

Could you also unplug your eDP panel and leave only DP? It could make the debug message more clean.

Thanks.

WayneWWW,

In terms of enabling only SOR1 + DP, it takes time to modify it because
NV’s board-pannel.c, those functions : primary and secondary get panel always ‘limites’ the connected output.

I will try to check if I can enablie SOR1 + DP only.

One more thing : in my log, you can see 'I tried to figure out who, sor1/sor, is occupied by which output. (eDP or DP).
Please check it out during my modification in this.

Regards,

Tonie

I am little bit confused by this log. Could you explain what is going on?

[ 3.042692] tegra_secondary_panel_get_dt_node /host1x/sor1 0
[ 3.042721] tegra_secondary_panel_get_dt_node np_sor sor1 np_panel hdmi-display

Hi WayneWWW,

Could you help me to take a look on the attached files? It seems that DP1 always links training fail.

tegradc_1.log (68.4 KB)
tegradc_0.log (84.8 KB)

Hi, WayneWWW,

In DTS, the panel name is hdmi-display but inside, it’s dp.
The reason I did it is I want to sure the system use different DTS settings.

In hdmi-display,
compatible = “dp,display”; …

nvidia,out-type = <TEGRA_DC_OUT_DP>
and so on.

Hi jjc_0115,

Could you describe what is the difference between your log?

Hi WayneWWW,

I tried to enabled edp or DP port along by setting the status as follows, and after TX1 boot up then re-plug the eDP or DP. The kernel log in the previous attachment (tegradc_0.log and tegradc_1.log).

sor {
		status = "okay";
		hdmi-display {
			status = "disabled";
		};
		dp-display {
			status = "disabled";
		};
		panel-s-edp-uhdtv-15-6 {
			status = "disabled";
		};
	};
	sor1 {
		status = "okay";
		hdmi-display {
			status = "disabled";
		};
		dp-display {
			status = "okay";
		};
	};

So far, I get the empty mode list on the “tegra_fb_update_monspecs” function when DP port re-plugin but EDID is correctly.

nvidia@tegra-ubuntu:~$
nvidia@tegra-ubuntu:~$
nvidia@tegra-ubuntu:~$ 
[   92.404695] tegradc tegradc.1: dp: plug event received
[   92.410260] hpd: state 3 (Disabled), hpd 1, pending_hpd_evt 1
[   92.420344] hpd: switching from state 3 (Disabled) to state 0 (Reset)
[   92.464135] hpd: state 0 (Reset), hpd 1, pending_hpd_evt 0
[   92.469827] tony.c [tegra_fb_update_monspecs:771]
[   92.475853] tony.c [tegra_fb_update_monspecs:783]
[   92.480742] tony.c [tegra_fb_update_monspecs:797]
[   92.486026] tony.c [tegra_fb_update_monspecs:804]
[   92.490919] tony.c [tegra_dc_set_mode:659]
[   92.495263] tony.c [_tegra_dc_set_mode:607] tegradc.1
[   92.500417] tony.c [_tegra_dc_set_mode:626] tegradc.1
[   92.505490] tegradc tegradc.1: _tegra_dc_set_mode():MODE:0x0@0.000Hz pclk=0
[   92.512452] tony.c [tegra_dc_set_mode:661]
[   92.516641] hpd: hpd_switch 0
[   92.519618] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[   92.535646] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0
[   92.541585] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID)
[   92.607997] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0
[   92.620103] tony.c [tegra_fb_update_monspecs:771]
[   92.627355] tony.c [tegra_fb_update_monspecs:840]
[   92.632356] tony.c [tegra_fb_update_monspecs:855]
[   92.637235] tony.c [tegra_fb_update_monspecs:858]
[   92.642165] hpd: Display connected, hpd_switch 1
[   92.646877] hpd: switching from state 2 (Check EDID) to state 4 (Enabled)

nvidia@tegra-ubuntu:~$
nvidia@tegra-ubuntu:~$ sudo su
[sudo] password for nvidia:
root@tegra-ubuntu:/home/nvidia# cat /sys/kernel/debug/tegradc.1/edid
edid[000] = 00 ff ff ff ff ff ff 00 04 72 89 02 bd b6 30 23
edid[010] = 21 16 01 04 a5 35 1e 78 ca bb 04 a1 59 55 9e 28
edid[020] = 0d 50 54 00 00 00 00 00 00 00 00 00 00 00 00 00
edid[030] = 00 00 00 00 00 00 0f 77 00 04 f1 b0 27 40 66 2c
edid[040] = 45 00 0f 28 21 00 00 1e 00 00 00 00 00 00 00 00
edid[050] = 00 00 00 00 00 00 00 00 00 00 00 00 00 fc 00 42
edid[060] = 33 37 31 5f 56 31 32 2e 31 00 00 00 00 00 00 00
edid[070] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15
root@tegra-ubuntu:/home/nvidia#

Hi jjc_0115,

What panel do you want to enable now? eDP or DP? I have some patches for enabling eDP on rel-28.1 (or you could directly use rel-28.2 DP, my patch is merged).

According to latest device-tree and log, seems that link training is done and you want to know why tegra_fb_update_monspecs does not work?

Could you check the parsing in edid.c?

Hi WayneWWW,

The eDP port is working fine on my device with r28.1, and I would like to reference your patch if you could share the patches to me.

The link training always fail with DP port

[    5.355684] dp lt: switching from state 6 (reduce bit rate) to state 4 (link training fail/disable)

When I re-plug the DP port, it seems to get the empty mode as follows, I guess the pasing EDID is working fine, since I get the correctly EDID.

[   92.505490] tegradc tegradc.1: _tegra_dc_set_mode():MODE:0x0@0.000Hz pclk=0

[sudo] password for nvidia:
root@tegra-ubuntu:/home/nvidia# cat /sys/kernel/debug/tegradc.1/edid
edid[000] = 00 ff ff ff ff ff ff 00 04 72 89 02 bd b6 30 23
edid[010] = 21 16 01 04 a5 35 1e 78 ca bb 04 a1 59 55 9e 28
edid[020] = 0d 50 54 00 00 00 00 00 00 00 00 00 00 00 00 00
edid[030] = 00 00 00 00 00 00 0f 77 00 04 f1 b0 27 40 66 2c
edid[040] = 45 00 0f 28 21 00 00 1e 00 00 00 00 00 00 00 00
edid[050] = 00 00 00 00 00 00 00 00 00 00 00 00 00 fc 00 42
edid[060] = 33 37 31 5f 56 31 32 2e 31 00 00 00 00 00 00 00
edid[070] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15
root@tegra-ubuntu:/home/nvidia#

I see below log, could you check if edid read has any error in “edid_check_state”?

[    6.135401] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0

Hi, WayneWWW,

I did a test.
I use original R28.1 and I only modified ‘tegra210-ers-hdmi-e2190-1100-a00.dtsi’.
I change ‘nvidia, output-type = <TEGRA_DC_OUT_HDMI>’ to TEGRA_DC_OUT_DP.

Then, the log shows

In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1…
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
223 bytes read in 70 ms (2.9 KiB/s)
p2371-2180 eMMC boot options
1: primary kernel
Enter choice: 1: primary kernel
Retrieving file: /boot/initrd
0 bytes read in 72 ms (0 Bytes/s)
Retrieving file: /boot/Image
20902448 bytes read in 526 ms (37.9 MiB/s)
append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=04229170493060008000 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange root=/dev/mmcblk0p1 rw rootwait

Flattened Device Tree blob at 83100000

Booting using the fdt blob at 0x83100000
reserving fdt memory region: addr=80000000 size=20000
Using Device Tree in place at 0000000083100000, end 00000000831af0f8

Starting kernel …

Then stop…
No matter how many times I reset it, it stopped (hangs up) like this.

May I have your opinion ?

Regards,

Tonie

Update :

I found there are some issues in my code and then the system will be hangs up in the beginning.
It’s strange…
Anyway, please ignore this.

Hi, WayneWWW,

I also found one thing…
Once I had enabled sor/sor1/dpaux/dpaux1/dc1/dc2, I found for DP/SOR1 cannot pass the link training.
This function :

tegra_dpaux_readl(dp->dpaux, DPAUX_DP_AUXSTAT)

always tells 0x0…

I had confirmed it readed for DPAUX1, not DPAUX (0).
Is there other settings I have to do ?

It looks like dpaux1 doesn’t work.

Hi Tonie,

Sorry for late reply. In fact, I think it is not from dpaux1, but from somewhere in DP driver.

If you change DP to dpaux instead of dpaux1, it is still not working, right?

We are still trying to get this to support but still under discussion.

Hi, WayneWWW,

The reason I doubt of dpaux is there is a log message I got.
That is :

[ 1.015935] Host read timeout at address 545c0124

After searching the code, the address of 545cxxxx is dpaux.
I don’t know if it is correct.

And you are right, eDP with dpaux is working.
I tried to make dp with dpaux1 but failed.
I still do not know why.

How about the edid parsing? Is it called?

Hi, WayneWWW,

It looks ok.
Both can detect correct resolution of connected monitors.

You can refer to the log I post on #21

Hi Tonie,

I feel you and jjc_0115’s status are different although you two looks like working together.

He has something in parsing EDID but you don’t. It is a little bit confusing…

Hi, WayneWWW,

Yes, we are working on the same board.
I am supporting him to bring up the DP port because the deadline is almost arrived.
We both are suffering in bringing up DP port. (make HDMI to be DP)

Please support us.

So the error in below is already resolved?

[   92.505490] tegradc tegradc.1: _tegra_dc_set_mode():MODE:0x0@0.000Hz pclk=0